3D Systems Sense Bruksanvisning

3D Systems skanner Sense

Läs gratis den bruksanvisning för 3D Systems Sense (18 sidor) i kategorin skanner. Guiden har ansetts hjälpsam av 8 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 4.5 recensioner. Har du en fråga om 3D Systems Sense eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/18

Sense™

3D Scanner

User Guide

copyrighted and contains proprietary information that is the property of 3D Systems, Inc. Cubify, 3D Systems, and

the 3D Systems logo are registered trademarks, and Sense is a trademark, of 3D Systems, Inc. Use of the Cubi-

fy.com website constitutes acceptance of its Terms of Service and Privacy Policy.

FCC NOTICE

This equipment has been tested and found to comply with the limits for a class “A” digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment

in a residential area is likely to cause harmful interference in which case the user will be required to correct the inter-

ference at their expense.

COMPLIANCE

This equipment conforms with International Electric Committee (IEC) 60950-1 and (IEC) 60825-1 and meets the

requirements of the applicable EC directives.

WARRANTY

3D Systems warrants that the Sense 3D scanner will be free from defects in materials and workmanship, during the

applicable warranty period, when used under the normal conditions described in the documentation provided to

you, including the respective User Guide. 3D Systems will promptly repair or replace the Scanner, if required, to

make it free of defects during the warranty period. This warranty excludes repairs required during the warranty

period because of abnormal use or conditions (such as riots, floods, misuse, neglect or improper service by anyone

except 3D Systems or its authorized service provider). The warranty period for the Scanner is twelve (12) months

and shall start the date Your Scanner is purchased. For consumers who are covered by consumer protection laws

or regulations in their country of purchase or, if different, their country of residence, the benefits conferred by our

standard warranty are in addition to, and operate concurrently with, all rights and remedies conveyed by such con-

sumer protection laws and regulations, including but not limited to these additional rights.

THIS WARRANTY IS THE ONLY WARRANTY PROVIDED FOR THE SENSE 3D SCANNER. TO THE MAXIMUM

EXTENT PERMITTED BY LAW, 3D SYSTEMS EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES FOR THE

SENSE 3D SCANNER AND EACH OF ITS COMPONENTS, WHETHER THOSE WARRANTIES ARE EXPRESS,

IMPLIED OR STATUTORY, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR INTENDED

OR PARTICULAR PURPOSES.

LIMITATION OF LIABILITY

3D SYSTEMS WILL NOT BE RESPONSIBLE FOR CONSEQUENTIAL, EXEMPLARY OR INCIDENTAL DAMAGES

(SUCH AS LOSS OF PROFIT OR EMPLOYEE’S TIME) REGARDLESS OF THE REASON. IN NO EVENT SHALL

THE LIABILITY AND/OR OBLIGATIONS OF 3D SYSTEMS ARISING OUT OF THE PURCHASE, LEASE, LICENSE

AND/OR USE OF THE EQUIPMENT BY YOU OR OTHERS EXCEED THE PURCHASE PRICE OF THE SENSE 3D

SCANNER.

TABLE OF CONTENTS

INTRODUCTION 4

SAFETY AND COMPLIANCE 5

SENSE SCANNER SETUP 6

What's Included 6

Download The Sense Software 6

Install The Sense Software 6

Run The Sense Software 6

Activate Your Sense Scanner 7

HOW TO SCAN 8

Sense Navigation 8

Scanning Best Practices 8

Scanning Procedure 8

Edit A Scan 10

SENSE SCANNER TIPS AND TRICKS 12

SENSE SETTINGS 13

Scan Settings 13

Edit And Enhance Settings 14

Export Settings 15

FEATURES AND SPECIFICATIONS 17

Produktspecifikationer

Varumärke:	3D Systems
Kategori:	skanner
Modell:	Sense
Bredd:	33 mm
Djup:	129 mm
Höjd:	178 mm
USB-version:	3.2 Gen 1 (3.1 Gen 1)
Standardgränssnitt:	USB 2.0, USB 3.2 Gen 1 (3.1 Gen 1)
Maximal skanningsstorlek:	3000 x 3000 mm
Produktens färg:	Svart
Färgskanning:	Ja
Windows-operativsystem som stöds:	Ja
Mac-operativsystem som stöds:	Ja
Strömförbrukning (vanlig):	2.25 W
Temperatur vid drift:	10 - 40 ° C
USB-port:	Ja
Nätaggregatstyp:	USB
Minimum hårddisk utrymme:	4096 MB
Minimikrav, RAM:	2048 MB
Minimikrav, processor:	Intel® Core™ i5
Ingång, färgdjup:	16 bit
Optisk skanningsupplösning:	- DPI
Daglig arbetscykel (max):	- sidor