8BitDo M30 RR Bruksanvisning


Läs gratis den bruksanvisning för 8BitDo M30 RR (8 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 30 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 15.5 recensioner. Har du en fråga om 8BitDo M30 RR eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/8
For PS4 controller
1. Insert Retro Receiver into console and then press the pairing button (the LED will rapidly blink)
2. Press and hold the Share and PS buttons until the lightbar begins to strobe quickly in double.
3. Wait until your Retro Receiver's LED is solid blue and the controller's lightbar stay on.
4. For next connection only need to press PS button and wait until receiver's LED is solid blue.
MODE START
DPAD
Z
Y
C
X
For PS3 controller
1. Download and Run 8BitDo Retro Receiver Tools on your PC available for Mac and PC.
2. On your Retro Receiver, hold down the pairing button and connect it to your MAC/PC via USB.
3. Connect your PS3 controller to MAC/PC via USB.
4. Once your Retro Receiver and PS3 controller are both connected via USB, click the "Pair" button
in the soware.
5. Once pairing is complete, you can insert your Retro Receiver into your console.
6. Now press the PS button on your PS3 controller.
7. Wait until your Retro Receiver's LED is solid blue and the controller's #1 LED stay on.
8. To re-sync aer powering your console down, begin from step 6.
Retro Receiver
for original Genesis & Mega Drive
• 6 button mode <=> 3 button mode switching can be achieved by pressing button on the mode
controller for 3 seconds. LED on the receiver will blink twice to indicate the change


Produktspecifikationer

Varumärke: 8BitDo
Kategori: Inte kategoriserad
Modell: M30 RR

Behöver du hjälp?

Om du behöver hjälp med 8BitDo M30 RR ställ en fråga nedan och andra användare kommer att svara dig