Abus E201 Bruksanvisning
Läs gratis den bruksanvisning för Abus E201 (1 sidor) i kategorin Säkerhet. Guiden har ansetts hjälpsam av 7 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 4 recensioner. Har du en fråga om Abus E201 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/1
E201 | Circuit Breaker Lockout
User Manual
www.abus.com
07/2015
Subject to technical alterations. No liability for mistakes and printing errors.
©ABUS | D 58292 Wetter | Germany
1. 2.
3.
4. 5.
1. Set the circuit breaker to
the ”Off” position.
2. Place the circuit breaker lockout
device over the switched-off rocker
switch so the black opening lies
around the rocker and the small
teeth grip the rocker from below.
3. Turn the screw wheel clockwise to
attach the circuit breaker lock to
the rocker.
Please note the following:
Make sure that the circuit breaker
cannot be switched back to the “On“
position. The circuit breaker rocker
can still be moved a little, but must
not reach the “On“ position. If it can
do so, you must re-attach the lock or
use the enclosed adapter if necessary.
4. If the lock sits tightly and securely on
the circuit breaker and prevents the
“On” position of the circuit breaker
rocker from being set, please put the
cover over the screw wheel and insert
a padlock through the hole provided.
Using the adapter:
If you cannot insert the lock correctly on the circuit breaker or if it allows too much space for the rocker, use the adapter piece.
The small side tabs of the adapter are clipped into the triangular side openings of the device for this purpose.
You can now attach the lock as previously described. The space for the rocker is markedly reduced by the adapter piece (Fig. 4 & 5).
You will find additional notes and corresponding application videos to every lockout device following the link:
http://www.abus.com/eng/Service/Videos/Industrial-safety
Application:
Material Content:
a. Circuit Breaker Lockout E201 b. Adapter
WARNING:
Product should only be used by personnel properly trained in lockout procedures. Product should only be used on the appropriate application (s).
Follow product instructions for proper application of each product. Properly trained personnel should check to ensure that product is secure and
equipment will not operate. Failure to follow product instructions and warnings may result in serious bodily inury or death.
Produktspecifikationer
| Varumärke: | Abus |
| Kategori: | Säkerhet |
| Modell: | E201 |
Behöver du hjälp?
Om du behöver hjälp med Abus E201 ställ en fråga nedan och andra användare kommer att svara dig
Säkerhet Abus Manualer
22 Oktober 2024
5 September 2024
25 Juli 2024
25 Juli 2024
25 Juli 2024
25 Juli 2024
25 Juli 2024
24 Juli 2024
23 Juli 2024
Säkerhet Manualer
- Profile
- PIR Alarm
- Airbolt
- Dymond
- Galaxy
- Overmax
- Grundig
- Alhua - Dahua
- Plustek
- Eden
- Wanscam
- Bolyguard
- One Concept
- Provision ISR
- Alphatronics
Nyaste Säkerhet Manualer
19 Februari 2025
12 Januari 2025
7 Januari 2025
7 Januari 2025
24 Oktober 2024
21 Oktober 2024
20 Oktober 2024
20 Oktober 2024
Axis Camera Station S9001 Mk II Desktop Terminal Bruksanvisning
19 Oktober 2024
18 Oktober 2024