Accell UltraAV K078C-006B Bruksanvisning

Accell mottagare UltraAV K078C-006B

Läs gratis den bruksanvisning för Accell UltraAV K078C-006B (2 sidor) i kategorin mottagare. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 7.5 recensioner. Har du en fråga om Accell UltraAV K078C-006B eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

Model Numbers:

K078C-006B (1x4)

K078C-007B (1x8)

UltraAV®

HDMI Splitter and Distribution

Amplifier

READ ME FIRST – SETUP INSTRUCTIONS

Thank you for purchasing the Accell UltraAV HDMI

Distribution Ampliﬁ er. This product is designed to provide

an exceptional performance and lue. Please review the va

manual before operating and retain for future reference.

- CAUTION -

1. Ensure the unit has sufﬁ cient

ventilation. Do not cover

ventilation openings. Do not install

in a conﬁ ned space.

2. Do not operate near source

of heat. Do not stack on to p,

underneath or between other heat

generating unit/s including other

ampliﬁ ers.

3. Unplug power adapter if not

used for an extended period.

4. prevent damage from power To

surges, the unit should be plugged

into a surge protector or surge pro-

tected power source.

5. Do not use near liquid or areas

of heavy moisture.

6. Clean unit with a clean and dry

cloth only.

7. This unit cannot be serviced in

the ﬁ eld. Contact Accell if service is

required.

8. Do not open case, risk of shock -

shock hazard.

9. Do not modify power cord or use

the product if the power cord is

damaged.

Introduction

The UltraAV HDMI Distribution Amplifier (Splitter) accepts a signal from

a single HDMI enabled audio/video source and splits the single input

into 4 (1x4 Splitter) or into 8 (1x8 Splitter) HDMI outputs. The audio/

video signal is mirrored on up to 4 (1x4 Splitter) or 8 (1x8 Splitter) HDMI

displays, monitors, projectors or TV’s.

Over-Current and Over-Voltage Protection

The circuit boards are equipped with both oltage over-current and over-v

protection and will automatically power down if encountered. The circuit

boards will restore automatically once the ex ltage cessive current or vo

has passed.

Package Contents

● HDMI Distribution Amplifier (Splitter) ● Power Adapter

● Owner’s Manual

specifications continued...

● Operating temperature range: 5 to 131°F (-15 to 55°C)

● Operating humidity range: 5% to 90% RH (no condensation)

1x8 HDMI Distribution Amplifier (Splitter)

Model: K078C-007B

Speciﬁ cations

● Connect 1 HDMI Source to up to 8 HDMI Displays

● Supports HD resolutions up to 1080P and 3D

● HDMI 1.4a, HDCP 1.2 compliant

● Input video signal: 5v p-p, Input DDC signal: 5v p-p (TTL)

● Data transfer speed of 6.75Gbps (225MHz)

● Audio formats supported: DTS-HD 7.1, Dolby True-HD 7.1

● Deep color up to 36-bit

● Maximum input cable length: Up to 20m (24AWG)

● Maximum output cable length: Up to 20m (24AWG)

● Supports cascade up to 6 units (Silicon Image chipset)

● Rack shelf or surface mountable

● 5V DC, UL Listed power adapter

● Input AC: 50Hz to 60Hz, 100-240V

● Approximate dimensions: 10.9”W x 1.1”H x 6.1”D

(277W x 28H x 156D mm)

● Operating temperature range: 5 to 131°F (-15 to 55°C)

● Operating humidity range: 5% to 90% RH (no condensation)

1x4 HDMI Distribution Amplifier (Splitter)

Model: K078C-006B

Speciﬁ cations

● Connect 1 HDMI Source to up to 4 HDMI Displays

● Supports HD resolutions up to 1080P and 3D

● HDMI 1.4a, HDCP 1.2 compliant

● Input video signal: 5v p-p, Input DDC signal: 5v p-p (TTL)

● Data transfer speed of 6.75Gbps (225MHz)

● Audio formats supported: DTS-HD 7.1, Dolby True-HD 7.1

● Deep color up to 36-bit

● Maximum input cable length: Up to 20m (24AWG)

● Maximum output cable length: Up to 20m (24AWG)

● Supports cascade up to 3 units

● Shelf or surface mountable

● 5V DC, UL Listed power adapter

● Input AC: 50Hz to 60Hz, 100-240V

● Approximate dimensions: 10.9”W x 1.1”H x 6.1”D

277W x 28H x 156D mm

Cascading

The HDMI splitter can be cascaded (l ered) to expand the number of ay

supported displays.

K078C-006B (1x4 Splitter) - Supports up to 3 layers.

K078C-007B (1x8 Splitter) - Features a Silicon Image chipset supporting

up to 6 layers.

To create a 2 layer cascade, two same distribution amplifiers must be

used. Run an HDMI cable from an output on unit #1 to the input of unit

#2. A 2 layer cascade of the 1x4 splitter will support up to 7 outputs. A 2

layer 1x8 splitter cascade will support up to 15 outputs.

Setup

With the splitter power switch in the OFF position, connect an HDMI High

Speed cable from the HDMI Output on the audio/video source to the

HDMI Input 1 on the back of the splitte r.

Tips: Use the shortest length HDMI cables possible in each point

in the installation. Use only High Quality and High Speed HDMI

cables.

Next, connect an HDMI cable to the HDMI Output Port 1 on the splitter

and then connect the other end to an HDMI Input Port on the displ ay

device. Similarly, using HDMI cables, connect the remaining HDMI Output

Ports on the rear of the splitter to the HDMI Input ports of the other

displays.

Connect the power adapter to the splitte Plug the power adapter into a r.

surge protected AC power outlet. Turn ON the video source, and turn ON

the displays. Turn the splitter’s power switch to the ON position.

Produktspecifikationer

Varumärke:	Accell
Kategori:	mottagare
Modell:	UltraAV K078C-006B
Färg på produkten:	Zwart
Användarmanual:	Ja
LED-indikatorer:	Status
Anslutningsteknik:	Draadloos
Medföljande kablar:	USB
Förpackningsmått (BxDxH):	240 x 140 x 50 mm
Gränssnitt:	WLAN
Wifi-band:	Single-band (2.4 GHz)
Nätverksstandard:	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Säkerhetsalgoritmer som stöds:	128-bit WEP, 64-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Förvaringstemperatur:	-20 - 60 °C
Internera:	Nee
Kompatibla operativsystem:	Windows 98SE, 2000, Millennium, XP, Vista, 7\nLinux\nMac OS X
Stöder Mac-operativsystem:	Ja
Förvaringsfuktighet:	5 - 90 procent
Frekvensomfång:	2.412 - 2.462 GHz
Strömförsörjning via USB:	Ja
Värdgränssnitt:	USB
Maximal dataöverföringshastighet:	300 Mbit/s
Dataöverföringshastigheter som stöds:	11/54/150/300 Mbps
Maximalt avstånd:	1000 m
Mått (B x D x H):	75 x 7 x 60 mm
Chipset:	Ralink 2770 + 2720
Komponent för:	PC/notebook
Strömförbrukning (typiskt):	1 W
Drifttemperatur (TT):	0 - 40 °C
Relativ luftfuktighet i drift (VV):	10 - 85 procent
Förstärkning:	5 dBi