Acer B227QB Bruksanvisning

Acer Övervaka B227QB

Läs gratis den bruksanvisning för Acer B227QB (2 sidor) i kategorin Övervaka. Guiden har ansetts hjälpsam av 7 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 4 recensioner. Har du en fråga om Acer B227QB eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

English

Acer LCD Monitor Quick Start Guide (QSG)

Important safety instructions

Please read the following instructions carefully.

1. To clean the LCD monitor screen:

• Turn o󰀨 the LCD monitor and unplug the power cord.

• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage

it.

3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.

4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of

any nature.

5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside

this range may result in permanent damage.

6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:

• Monitor-to-PC signal cable is frayed or damaged.

• Liquid spills onto the LCD monitor or the monitor is exposed to rain.

• The LCD monitor or case is damaged.

Attaching the monitor to the base

1. Remove the monitor from the packaging.

2. Attach the footstand to the base. (for selected models).

3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)

4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)

Connecting your monitor to a computer

1. Turn o󰀨 your computer and unplug your computer's power cord.

2. Connect the signal cable to the DP (optional) and/or VGA (optional) and/

or HDMI (optional) input socket of the monitor, and the VGA (optional)

and/or DP (optional) and/or HDMI (optional) output socket of the graphics

card on the computer. Then tighten the thumbscrews on the signal cable

connector.

3. Connect the USB Cable(Optional)

Connect the USB 3.0 cable to port for fast charge.

Connect the USB 3.0 cable to port.

4. Optional: Connect the audio input socket (AUDIO IN) of the LCD monitor

and the line-out port on the computer with the audio cable.

5. Insert the monitor power cable into the power port at the back of the

monitor.

6. Plug the power cords of your computer and your monitor into a nearby

electrical outlet.

Note: Audio output is only for audio output model. Please check user

manual for more instruction.

USB

VGA

Adaptive SYNC (HDMI/DP):

It can allow a Adaptive SYNC supported graphics source to dynamically adjust display refresh rate based on typical content

frame rates for power e󰀩cient, virtually stutter free and low-latency display update.

External controls

1 Power button Turns the monitor on/o󰀨.Blue indicates power on. Amber indicates standby/ power saving

mode.

Produktspecifikationer

Varumärke:	Acer
Kategori:	Övervaka
Modell:	B227QB
Enhetsplacering:	Vrijstaand
Färg på produkten:	Roestvrijstaal
Dörrgångjärn:	Rechts
Inbyggd display:	Ja
Vikt:	64000 g
Bredd:	596 mm
Djup:	626 mm
Höjd:	1790 mm
Nettoskatt:	85 W
Sladdlängd:	1.7 m
Ljudnivå:	43 dB
Årlig-energiförbrukning:	303 kWu
Förpackningens vikt:	66000 g
Förpackningens bredd:	635 mm
Djuppackning:	705 mm
Förpackningshöjd:	1875 mm
Energieffektivitetsklass (gammal):	A+
Frys bruttokapacitet:	239 l
Frys nettokapacitet:	223 l
Fryskapacitet:	18 kg/24u
Retentionstid vid strömavbrott:	24 uur
Antal fryshyllor:	5
antal stjärnor:	4*
Energianvändning per dag:	0.825 kWh/24u
AC-ingångsspänning:	220 - 240 V
AC-ingångsfrekvens:	50 Hz
Typ produkt:	Staand