Acer EI491CRS Bruksanvisning
Läs gratis den bruksanvisning för Acer EI491CRS (7 sidor) i kategorin Övervaka. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 1.5 recensioner. Har du en fråga om Acer EI491CRS eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/7
LCD Monitor Quick Start Guide - 1
English
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen: Be sure that your monitor is electrically
rated to operate with the AC power available in your location.
• Turn off the LCD monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen
gently.
• NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE
SCREEN OR CASE.
• PLEASE DO NOT USE ANY AMMONIA OR ALCOHOL-BASED
CLEANERS ON THE LCD DISPLAY SCREEN OR CASE.
• Acer will not be liable for damage resulting from use of any ammonia or
alcohol-based cleaners.
2. Do not place the LCD monitor near a window. Exposing the monitor to
rain, moisture or sunlight can severely damage it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause
permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An
authorized technician should perform servicing of any nature.
5. Store the LCD monitor in a room with a temperature of -20° to 60°C (-4° to
140°F). Storing the LCD monitor outside this range may result in
permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any
of the following circumstances occur:
• Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the LCD monitor or the monitor is exposed to rain.
• The LCD monitor or case is damaged.
7. EI491CR can be overclocked to a higher refresh rate than advertised by
the panel specification. This function can be use the system control panel
to set the maximum refresh rate.
Important: This device is designed to support refresh rate overclocking.
However, overclocking may result in system instability. If you experience
instability, try reducing the overclock to a lower refresh rate through the
on-screen display settings.
LCD Monitor Quick Start Guide - 2
English
Package contents
LCD Monitor AC Power Cord DP Cable (Optional)
HDMI Cable (Optional) Remote Control Quick Start Guide
HDMI
HDMI
El1 se ries/El491CR
LCD Monitor Quick Start Guide - 3
English
Attaching the monitor to the base
1. Unpack the box. 2. Take the Styrofoam with display out of
the box.
3. Remove the top Styrofoam. 4. Tighten the base and stand arm with
three screws.
5. Attach the base of step 4 to the quick
release notch of the LCD monitor
securely.
6. When detaching the base, remove
the semicircular cover first, then press
down the quick release button as
illustrated.
7. Flip the LCD monitor over to make it
stand upright on the desk where it will
be used. (Note: Do NOT press the
screen to avoid damage any time.)
8. Cables can be connected through
decorative holes in the bracket.
Produktspecifikationer
| Varumärke: | Acer |
| Kategori: | Övervaka |
| Modell: | EI491CRS |
Behöver du hjälp?
Om du behöver hjälp med Acer EI491CRS ställ en fråga nedan och andra användare kommer att svara dig
Övervaka Acer Manualer
9 April 2025
14 Mars 2025
14 Mars 2025
14 Mars 2025
14 Mars 2025
2 Mars 2025
27 Februari 2025
20 Februari 2025
18 Februari 2025
7 Februari 2025
Övervaka Manualer
- Bauhn
- Waeco
- Elite Screens
- Newline
- Aputure
- Marshall
- AMCV
- BenQ
- Legamaster
- Viewsonic
- Corsair
- Faytech
- Neumann
- Planet Audio
- CTL
Nyaste Övervaka Manualer
9 April 2025
8 April 2025
8 April 2025
7 April 2025
5 April 2025
5 April 2025
4 April 2025
4 April 2025
2 April 2025
2 April 2025