Acer KA270HD Bruksanvisning

Acer Övervaka KA270HD

Läs gratis den bruksanvisning för Acer KA270HD (3 sidor) i kategorin Övervaka. Guiden har ansetts hjälpsam av 21 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 11 recensioner. Har du en fråga om Acer KA270HD eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/3

English

Acer LCD Monitor Quick Start Guide (QSG)

Important safety instructions

Please read the following instructions carefully.

1. To clean the LCD monitor screen:

• Turn off the LCD monitor and unplug the power cord.

• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.

3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.

4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of any

nature.

5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside this

range may result in permanent damage.

6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:

• Monitor-to-PC signal cable is frayed or damaged.

• Liquid spills onto the LCD monitor or the monitor is exposed to rain.

• The LCD monitor or case is damaged.

Attaching the monitor to the base

1. Remove the monitor from the packaging.

2. Attach the footstand to the base. (for selected models).

3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)

4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)

Connecting your monitor to a computer

1. Turn off your computer and unplug your computer's power cord.

2. Connect the signal cable to the VGA (optional) and/or DVI-D

(optional) and/or HDMI (optional) input socket of the monitor, and

the VGA (optional) and/or DVI-D (optional) and/or HDMI (optional)

output socket of the graphics card on the computer. Then tighten the

thumbscrews on the signal cable connector.

3. Optional: Connect the audio input socket (AUDIO IN) of the LCD

monitor and the line-out port on the computer with the audio cable.

4. Insert the monitor power cable into the power port at the back of the

monitor.

5. Plug the power cords of your computer and your monitor into a

nearby electrical outlet.

Note: Audio output is only for audio output model. Please check user manual for more instruction.

External controls

1&2 Power button Turns the monitor on/off. Blue indicates power on. Amber indicates standby/

power saving mode.

3&4 </> Minus / Plus If the OSD is active, press the or buttons to toggle between the OSD Minus Plus

options. If the OSD is inactive, press the or buttons to adjust the Minus Plus

volume. (Optional).

5 Menu OSD functions Press to view the OSD. Press again to enter a selection in the OSD.

6 Auto Auto If the OSD is active, press Auto to exit the OSD. Once the OSD is inactive, press

Auto and the monitor will automatically optimize the display position, focus, and

clock of your display.

7 Empowering Key Press this button to select scenario mode.

Produktspecifikationer

Varumärke:	Acer
Kategori:	Övervaka
Modell:	KA270HD
Färg på produkten:	Zwart
Antal per paket:	1 stuk(s)
Varumärkeskompatibilitet:	Weller
Kompatibilitet:	WFE P
Typ produkt:	Veiligheidshouder