Acer Predator CG48 Bruksanvisning
Läs gratis den bruksanvisning för Acer Predator CG48 (2 sidor) i kategorin Övervaka. Guiden har ansetts hjälpsam av 6 personer och har ett genomsnittsbetyg på 3.6 stjärnor baserat på 3.5 recensioner. Har du en fråga om Acer Predator CG48 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
English
Acer OLED Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the OLED monitor screen:
• Turn off the OLED monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the OLED monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.
3. Do not apply pressure to the OLED screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of
any nature.
5. Store the OLED monitor in a room with a temperature of -20° to 60° C (-4° to 140° F). Storing the OLED monitor
outside this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
• Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the OLED monitor or the monitor is exposed to rain.
• The OLED monitor or case is damaged.
7. In order to prevent damage to the OLED panel, do not place the monitor face down on a surface.
Installing the Monitor Base
1. Place the monitor on a table, with screen facing down.
2. Align and install the monitor bases into the mounting slots on the bottom of the monitor.
3. Secure the monitor bases with the four screws.
4. Lift the monitor to an upright positon and place it on a table.
5. Remove the plastic bag around the monitor.
Connecting your monitor to a computer
1. Turn off your computer and unplug your computer’s power cord.
DP
USB Type A
USB
USB Type C
（ ）2.1
Google
TV rubber
HDMI 1
HDMI 2
HDMI 3
HDMI 3
(2.1)
DP
（ ）
2.0
（ ）
2.0
（ ）
2.0
（ ）
2.0
2. Connect the signal cable to the DP (optional) and/or HDMI
(optional) input socket of the monitor, and the DP (optional) and/
or HDMI (optional) output socket of the graphics card on the
computer.
3. Connect the USB Cable (Optional)
Connect the USB 3.0 cable to port.
4. Connect the Type C Cable (Optional)
Connect the Type C Cable to port for fast charge
5. Insert the monitor power cable into the power port at the back of
the monitor.
6. Plug the power cords of your computer and your monitor into a nearby electrical outlet.
Note: Audio output is only for audio output model. Please check user manual for more instruction.
FreeSync Premium (HDMI2.1/DP/Type-C)
It can allow a FreeSync supported graphics source to dynamically adjust display refresh rate based on typical content
frameratesforpowerefcient,virtuallystutterfreeandlow-latencydisplayupdate.
Note:
• DP: 3840x2160 supports up to 138Hz in overclocking mode, FreeSync Premium and HDR10 function.
• Type-C: 3840x2160 supports up to 138Hz in overclocking mode, FreeSync Premium and HDR10 function.
• HDMI(2.0): 3840x2160 supports to 60Hz.
• HDMI(2.1): 3840x2160 supports up to 138Hz in overclocking mode, FreeSync Premium and HDR10 function.
External controls
1
2
3
4
5
Produktspecifikationer
| Varumärke: | Acer |
| Kategori: | Övervaka |
| Modell: | Predator CG48 |
Behöver du hjälp?
Om du behöver hjälp med Acer Predator CG48 ställ en fråga nedan och andra användare kommer att svara dig
Övervaka Acer Manualer
9 April 2025
14 Mars 2025
14 Mars 2025
14 Mars 2025
14 Mars 2025
2 Mars 2025
27 Februari 2025
20 Februari 2025
18 Februari 2025
7 Februari 2025
Övervaka Manualer
- IHealth
- Yorkville
- Eve Audio
- Maxdata
- Dynaudio
- QSC
- Monkey Banana
- Panasonic
- Mybeo
- Thomson
- Salora
- Atomos
- Delvcam
- RGBlink
- HKC
Nyaste Övervaka Manualer
9 April 2025
8 April 2025
8 April 2025
7 April 2025
5 April 2025
5 April 2025
4 April 2025
4 April 2025
2 April 2025
2 April 2025