Acer Predator XB273KLV Bruksanvisning
Läs gratis den bruksanvisning för Acer Predator XB273KLV (4 sidor) i kategorin Övervaka. Guiden har ansetts hjälpsam av 6 personer och har ett genomsnittsbetyg på 4.0 stjärnor baserat på 3.5 recensioner. Har du en fråga om Acer Predator XB273KLV eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
English
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen:
• Turn off the LCD monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage
it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of
any nature.
5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside
this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
• Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the LCD monitor or the monitor is exposed to rain.
• The LCD monitor or case is damaged.
Attaching the monitor to the base
1. Remove the monitor from the packaging.
2. Attach the footstand to the base. (for selected models).
3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)
4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)
Connecting your monitor to a computer
1. Turn off your computer and unplug your computer's power cord.
2. Connect the signal cable to the DP (optional) and/or HDMI (optional)
input socket of the monitor, and the DP(optional) and/or HDMI
(optional) output socket of the graphics card on the computer.
3. USB Type C Cable (Optional, USB Type C input models only)
Connect one end of the USB type C cable (optional) to your
computer and connect the other end to your electric devices.
4. Connect the USB Cable(Optional)
Connect the USB cable to port for fast charge.
Connect the USB cable to port.
5. Insert the monitor power cable into the power port at the back of the
monitor.
6. Connect the power adapter and power cord to the monitor, then to a
properly grounded AC outlet.
7. Connecting HDMI/DP+USB-B to computer 1 and USB-C to computer
2 when Control up to 2 computers from a single set of keyboard and
mouse connected to the monitor.
Note: Audio output is only for audio output model. Please check user
manual for more instruction.
Transmitting the 4K 160Hz signal via one HDMI 2.1/ DP 1.4/Type-C port
requires DSC (Display Stream Compression) functionality.
If your computer USB-C do not have DP-Alt, pls connect HDMI/
DP+USB-B to computer 1 and HDMI/DP+USB-C to computer 2.
DP
USB
HDMI 1 DP INHDMI 2
USB Type C
AMD FreeSync Premium:
It can allow a AMD FreeSync Premium supported graphics source to dynamically adjust display refresh rate based on
typical content frame rates for power efcient, virtually stutter free and low-latency display update.
KVM switch(USB Port Select):
The built-in KVM switch allows you to control up to 2 computers from a single set of keyboard and mouse connected to the
monitor.
Produktspecifikationer
| Varumärke: | Acer |
| Kategori: | Övervaka |
| Modell: | Predator XB273KLV |
Behöver du hjälp?
Om du behöver hjälp med Acer Predator XB273KLV ställ en fråga nedan och andra användare kommer att svara dig
Övervaka Acer Manualer
9 April 2025
14 Mars 2025
14 Mars 2025
14 Mars 2025
14 Mars 2025
2 Mars 2025
27 Februari 2025
20 Februari 2025
18 Februari 2025
7 Februari 2025
Övervaka Manualer
- AORUS
- SideTrak
- Citizen
- Genelec
- Hyundai
- Wimaxit
- GeChic
- Joy-it
- Eizo
- Daewoo
- Crestron
- Enttec
- KeepOut
- Brandson
- Yealink
Nyaste Övervaka Manualer
9 April 2025
8 April 2025
8 April 2025
7 April 2025
5 April 2025
5 April 2025
4 April 2025
4 April 2025
2 April 2025
2 April 2025