Acer V276HLW Bruksanvisning
Läs gratis den bruksanvisning för Acer V276HLW (3 sidor) i kategorin Övervaka. Guiden har ansetts hjälpsam av 6 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 3.5 recensioner. Har du en fråga om Acer V276HLW eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/3
English
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen:
• Turn off the LCD monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage
it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of
any nature.
5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside
this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
• Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the LCD monitor or the monitor is exposed to rain.
• The LCD monitor or case is damaged.
Attaching the monitor to the base
1. Remove the monitor from the packaging.
2. Attach the footstand to the base. (for selected models).
3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)
4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)
Connecting your monitor to a computer
1. Turn off your computer and unplug your computer's power cord.
2. Connect the signal cable to the VGA (optional) and/or DVI (optional)
and/or HDMI (optional) input socket of the monitor, and the VGA
(optional) and/or DVI (optional) and/or HDMI (optional) output
socket of the graphics card on the computer. Then tighten the
thumbscrews on the signal cable connector.
3. Optional: Connect the audio input socket (AUDIO IN) of the LCD
monitor and the line-out port on the computer with the audio cable.
4. Insert the monitor power cable into the power port at the back of the
monitor.
5. Plug the power cords of your computer and your monitor into a
nearby electrical outlet.
2
Note: Audio output is only for audio output model. Please check user manual for more instruction.
External controls
1&2 Power button Turns the monitor on/off. Blue indicates power on. Amber indicates standby/
power saving mode.
3&4 </> Minus / Plus If the OSD is active, press the or buttons to toggle between the OSD Minus Plus
options. If the OSD is inactive, press the or buttons to adjust the Minus Plus
volume. (Optional)
5 Menu OSD functions Press to view the OSD. Press again to enter a selection in the OSD.
6 Auto Auto If the OSD is active, press Auto to exit the OSD. Once the OSD is inactive, press
Auto and the monitor will automatically optimize the display position, focus, and
clock of your display.
Produktspecifikationer
| Varumärke: | Acer |
| Kategori: | Övervaka |
| Modell: | V276HLW |
Behöver du hjälp?
Om du behöver hjälp med Acer V276HLW ställ en fråga nedan och andra användare kommer att svara dig
Övervaka Acer Manualer
9 April 2025
14 Mars 2025
14 Mars 2025
14 Mars 2025
14 Mars 2025
2 Mars 2025
27 Februari 2025
20 Februari 2025
18 Februari 2025
7 Februari 2025
Övervaka Manualer
- Faytech
- Syscom
- Shimbol
- CTOUCH
- AMCV
- Chauvet
- ADS-TEC
- Extron
- Velleman
- Omron
- LightZone
- Peerless-AV
- Positivo
- Dell
- Newstar
Nyaste Övervaka Manualer
9 April 2025
8 April 2025
8 April 2025
7 April 2025
5 April 2025
5 April 2025
4 April 2025
4 April 2025
2 April 2025
2 April 2025