Acer VG270S Bruksanvisning
Sidor 3 Engels Övervaka
Läs bruksanvisningen för Acer VG270S gratis online eller ladda ner PDF:en. 25 personer har tyckt att guiden var hjälpsam. Fråga om modellen? Ställ en fråga
English
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen:
• Turn off the LCD monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage
it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of
any nature.
5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside
this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
• Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the LCD monitor or the monitor is exposed to rain.
• The LCD monitor or case is damaged.
7. Acer monitor is purposed for video and visual display of information obtained from electronic devices:
Attaching the monitor to the base
1. Remove the monitor from the packaging.
2. Attach the footstand to the base. (for selected models).
3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)
4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)
Connecting your monitor to a computer
1. Turn off your computer and unplug your computer's power cord.
2. Connect the signal cable to the HDMI (optional) and/or DP(optional)
input socket of the monitor, and the HDMI (optional) and/or
DP(optional) output socket of the graphics card on the computer.
Then tighten the thumbscrews on the signal cable connector.
3. Insert the monitor power cable into the power port at the back of the
monitor.
4. Plug the power cords of your computer and your monitor into a
nearby electrical outlet.
Note: Audio output is only for audio output model. Please check user
manual for more instruction.
FreeSync (HDMI/DP):
It can allow a FreeSync supported graphics source to dynamically adjust display refresh rate based on typical content
frameratesforpowerefcient,virtuallystutterfreeandlow-latencydisplayupdate.
1
2
3
4
5
External controls
1Power buttonTurns the monitor on/off.Blue indicates power on. Amber indicates standby/ power
saving mode.
2Function key
/
a. Press to view Main page. Press again to enter hotkey1 function.
b. When the Function Menu is active, press this key to view the basic
information for your monitor and current input or reset the custom color
settings to the factory defaults.
Produktspecifikationer
| Varumärke: | Acer |
| Kategori: | Övervaka |
| Modell: | VG270S |
Behöver du hjälp?
Om du behöver hjälp med Acer VG270S ställ en fråga nedan och andra användare kommer att svara dig
Övervaka Acer Manualer
Acer QG240YH3 Bruksanvisning Acer ED273P Bruksanvisning Acer VG220QH Bruksanvisning Acer CG437K Bruksanvisning Acer RG270 Bruksanvisning Acer QG221QB Bruksanvisning Acer XB272 Bruksanvisning Acer CP3271KP Bruksanvisning
Populära i Övervaka
Övervaka Manualer
Nyaste Övervaka Manualer
Philips 16B1P3320 Bruksanvisning Philips 172B9T Bruksanvisning Philips V Line 221V8L Bruksanvisning Philips 22B2N2100L Bruksanvisning Philips Evnia 24M2N3200L Bruksanvisning Samsung S32BM700UP Bruksanvisning Samsung S32CM703UU Bruksanvisning LG UltraFine 27UP850K Bruksanvisning Bauhn A24MT-0125 Bruksanvisning Sony FW-75BZ30J Bruksanvisning