Acer XFA240 Bruksanvisning
Sidor 2 Engels Övervaka
Läs bruksanvisningen för Acer XFA240 gratis online eller ladda ner PDF:en. 22 personer har tyckt att guiden var hjälpsam. Fråga om modellen? Ställ en fråga
English
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen:
• Turn off the LCD monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage
it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of
any nature.
5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside
this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
• Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the LCD monitor or the monitor is exposed to rain.
• The LCD monitor or case is damaged.
Attaching the monitor to the base
1. Remove the monitor from the packaging.
2. Attach the footstand to the base. (for selected models).
3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)
4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)
Connecting your monitor to a computer
1. Turn off your computer and unplug your computer's power cord.
2. Connect the signal cable to the DVI-D (optional) and /or DP
(optional) and/or HDMI (optional) and/or MHL (optional) input
socket of the monitor, and the DVI-D (optional) and/or DP
(optional) and/or HDMI (optional)and/or MHL (optional) output
socket of the graphics card on the computer. Then tighten the
thumbscrews on the signal cable connector.
3. Optional: Connect the audio input socket (AUDIO IN) of the LCD
monitor and the line-out port on the computer with the audio cable.
4. Insert the monitor power cable into the power port at the back of the
monitor.
5. Plug the power cords of your computer and your monitor into a
nearby electrical outlet.
------------------------------------------------------------------------------------------
Note: Audio output is only for audio output model. Please check
user manual for more instruction.
2
FreeSync:
It can allow a FreeSync supported graphics source to dynamically adjust display refresh rate based on typical content
frameratesforpowerefcient,virtuallystutterfreeandlow-latencydisplayupdate.
External controls
1&2Power buttonTurns the monitor on/off.Blue indicates power on. Amber indicates standby/ power
saving mode.
3Function key
/
a. Press to view Main page.Press again to enter Volume adjustment function.
b. When the Function Menu is active, press this key selected or move to the
next function.
Produktspecifikationer
| Varumärke: | Acer |
| Kategori: | Övervaka |
| Modell: | XFA240 |
Behöver du hjälp?
Om du behöver hjälp med Acer XFA240 ställ en fråga nedan och andra användare kommer att svara dig
Övervaka Acer Manualer
Acer DV433 Bruksanvisning Acer VL270U Bruksanvisning Acer Nitro XZ325QU Bruksanvisning Acer B227Q Bruksanvisning Acer V6 V206HQL Bruksanvisning Acer H223H Bruksanvisning Acer Predator XN253QX Bruksanvisning Acer AL2016Ws Bruksanvisning
Populära i Övervaka
Övervaka Manualer
Nyaste Övervaka Manualer
MSI MAG 242C Bruksanvisning LG W1953T Bruksanvisning Philips 25M2N5200U Bruksanvisning BlueBuilt BBQHM2710HC Bruksanvisning Philips Brilliance B-line 241B4LPYCS Bruksanvisning Viewsonic VX2428J2 Bruksanvisning ProDVX SD-18 Bruksanvisning ProDVX SD-15 Bruksanvisning AOC CQ32G4 Bruksanvisning Viewsonic XG275D1-4K Bruksanvisning