Acti E22VA Bruksanvisning
Acti
övervakningskamera
E22VA
Läs gratis den bruksanvisning för Acti E22VA (45 sidor) i kategorin övervakningskamera. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 6.5 recensioner. Har du en fråga om Acti E22VA eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/45
Box Camera Series
Hardware Manual
D21FA, D21VA D22FA, D22VA ,
E21FA, E21VA E22FA, E22VA ,
E23A, E23B, E24A, E25A
E217, E222, E270, E271
201 10 055/ /
www.acti.com
Hardware Manual
2
Table of Contents
Precautions ............................................................. 4
Safety Instructions .................................................................................... 6
Introduction ............................................................. 7
The List of Models ..................................................................................... 7
Package Contents ...................................................................................... 9
Physical Description ............................................................................... 10
D2xFA / E2xFA / E270 ........................................................................... 10
D2xVA / E2xVA / E23A / E24A / E25A / E271 ........................................ 10
E23B ..................................................................................................... 12
E217 ..................................................................................................... 14
E222 ..................................................................................................... 14
Mounting Options .................................................................................... 16
Indoor Installation Procedures ............................ 17
Step 1: Attach the Camera Lens ............................................................. 17
Step 2: Attach the Mounting Block ......................................................... 19
Step 3: Mount the Indoor Bracket .......................................................... 20
Step 4: Attach the Camera to the Bracket ............................................. 20
Step 5: Connect the Cable(s) .................................................................. 23
Step 6: Access the Camera Live View .................................................... 24
Step 7: Adjust the Viewing Angle and Focus ........................................ 24
Other Connections (Optional) .............................. 25
How to Connect DI/DO and Audio Devices ............................................ 25
How to Connect DI/DO Devices ............................................................ 25
DI/DO Connection Specifications .......................................................... 26
www.acti.com
Hardware Manual
3
How to Connect Audio Devices ............................................................. 29
How to Connect a Power Adapter (for E217, E222 only) ...................... 30
How to Connect a Serial Device (for E23B, E217, E222 only) .............. 32
Other Adjustments and Accessories .................. 34
How to Adjust the Viewing Angle and Focus ........................................ 34
D21FA / E21FA ..................................................................................... 34
D22FA / E22FA / E217 / E270 ............................................................... 34
D2xVA / E2xVA / E23A / E23B / E24A / E25A / E222 / E271 ................. 35
How to Install / Remove the Memory Card ............................................ 36
How to Insert the Memory Card ............................................................ 36
How to Remove the Memory Card ........................................................ 36
How to Replace the Lens ........................................................................ 37
Accessing the Camera ......................................... 39
Configure the IP Addresses .................................................................... 39
Access the Camera .................................................................................. 43
www.acti.com
Hardware Manual
4
Precautions
Read these instructions
You should read all the safety and operating instructions before using this product.
Heed all warnings
You must adhere to all the warnings on the product and in the instruction manual. Failure to follow
the safety instruction given may directly endanger people, cause damage to the system or to
other equipment.
Servicing
Do not attempt to service this video device yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Trademarks
All names used in this manual are probably registered trademarks of respective companies.
Liability
Every reasonable care has been taken during the writing of this manual. Please inform your local
office if you find any inaccuracies or omissions. We cannot be held responsible for any
typographical or technical errors and reserve the right to make changes to the product and
manuals without prior notice.
www.acti.com
Hardware Manual
5
Federal Communications Commission Statement
This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to the equipment that are not expressly approved by the
responsible party for compliance could void the user’s authority to operate the equipment.
European Community Compliance Statement
This product has been tested and found to comply with the limits for Class B
Information Technology Equipment according to European Standard EN 55022
and EN 55024. In a domestic environment, this product may cause radio interference in which
cause the user may be required to take adequate measures.
www.acti.com
Hardware Manual
6
Safety Instructions
Cleaning
Disconnect this video product from the power supply before cleaning.
Attachments
Do not use attachments not recommended by the video product manufacturer as they may cause
hazards.
Installation
Install this device as well as other devices (such as PoE injector, alarm, etc.) in a dry place
protected from weather.
Servicing
Do not attempt to service this video product yourself Refer all servicing to qualified service .
personnel.
Damage Requiring service
Disconnect this video product from the power supply immediately and refer servicing to qualified
service personnel under the following conditions.
1) When the power-supply cord or plug is damaged
2) If liquid has been spilled, or objects have fallen into the video product.
3) If the inner parts of video product ha been directly exposed to rain or water. ve
4) If the video product does not operate normally by following the operating Instructions in this
manual. Adjust only those controls that are covered by the instruction manual, as an improper
adjustment of other controls may result in damage, and will often require extensive work by a
qualified technician to restore the video product to its normal operation.
Safety Check
Upon completion of any service or repairs to this video product, ask the service technician to
perform safety checks to determine if the video product is in proper operating condition.
www.acti.com
Hardware Manual
7
Introduction
The List of Models
This hardware manual contains the following models:
D FA 21
1MP Box with D/N, Fixed lens
D21VA
1MP Box with D/N, Vari-focal lens
D22FA
5MP Box with D/N, Fixed le ns
D22VA
5MP Box with D/N, Vari-focal lens
E21FA
1MP Box with D/N, Basic WDR, Fixed lens
E21VA
1MP Box with D/N, Basic WDR, Vari-focal lens
E22FA
5MP Box with D/N, Basic WDR, Fixed lens
E22VA
5MP Box with D/N, Basic WDR, Vari-focal lens
E23A
2MP Box with D/N, Basic WDR, SLLS, Vari-focal lens
E23B
2MP Box with D/N, Basic WDR, SLLS, Vari-focal lens
E24A
3MP Box with D/N, Superior WDR, Vari-focal lens
www.acti.com
Hardware Manual
8
E25A
1.3MP Box with D/N, Basic WDR, SLLS, Vari-focal lens
E217
2MP Video Analytics Box with D/N, Extreme WDR, SLLS, Fixed lens
E222
2MP Box with D/N, Extreme WDR, SLLS, Vari-focal lens
E270
10MP Box with D/N, Basic WDR, Fixed lens
E271
10MP Box with D/N, Basic WDR, Vari-focal lens
From the installation perspective, these models are very similar; therefore one manual is used for
all of them.
www.acti.com
Hardware Manual
9
Package Contents
Camera
Lens
(D2xFA / E2xFA / E217 / E270)
Lens
(D2xVA / E2xVA / E2xA /
E23B / E222 / E271)
Fixed focal lens with manual
focus and fixed iris
Vari-focal lens with manual
focus and DC iris
Mounting Block
with Screws
Audio and DI/DO
Terminal Block
Serial Port Terminal Block
(for E23B only)
Power Terminal Block
(for E217 & E222 only)
Quick Installation Guide
Warranty Card
NOTE: The pictures are for reference only, actual items may slightly vary in appearance.
www.acti.com
Hardware Manual
10
Physical Description
D2xFA / E2xFA / E270
D2xVA / E2xVA / E23A / E24A / E25A / E271
1) Ethernet Port
Connects to a network using an Ethernet cable.
2) Memory Card Slot
Insert a memory card into this slot for local recording purposes. See How to Install /
Remove the Memory Card on page for more information. 36
NOTE: Supports microSDHC and microSDXC cards.
3) Reset Button
The purpose of reset button is to restore the factory default settings of the camera, including
administrator’s password.
The reset button can be used for following purposes:
1. The administrator’s password has been forgotten and therefore the camera cannot be
accessed.
2. In case of IP address, mask, or allow/deny filter related issues, resulting with inability to
modify these settings.
3. In case of connectivity issues or abnormal video quality.
www.acti.com
Hardware Manual
11
How to do the reset?
Using a pointed object, such as a paper clip, press and hold the reset button for at least 5
seconds or until the Power LED goes off.
4) Power LED
The Power LED turns when the camera is powered on and the system is running. on
5) Digital Input / Output (DI/DO) and Audio Input / Output
This connector connects to digital input or output devices, such as an alarm trigger, panic
button, etc., as well as audio input and output devices, such as microphones and speakers.
Digital Input (DI) and Digital Output (DO) devices are used in applications like motion
detection, event triggering, alarm notifications, etc. See How to Connect DI/DO and Audio
Devices on page for more information. 25
6) DC Iris Port
When DC iris lens is used, connect the lens cable to this port. a
www.acti.com
Hardware Manual
12
E23B
1) Serial Port
This port connects to serial devices via RS-485 or RS- protocols. Use the supplied serial 422
port terminal block to connect the wires from the serial device to the camera.
See on page for How to Connect a Serial Device (for E23B, E217, E222 only) 32
connection details.
2) Ethernet Port
Connects to a network using an Ethernet cable.
3) Memory Card Slot
Insert a memory card into this slot for local recording purposes. See How to Install /
Remove the Memory Card on page for more information. 36
NOTE: Supports microSDHC and microSDXC cards.
4) Reset Button
The purpose of reset button is to restore the factory default settings of the camera, including
administrator’s password.
The reset button can be used for following purposes:
1. The administrator s password has been forgotten and therefore the camera cannot be ’
accessed.
2. In case of IP address, mask, or allow/deny filter related issues, resulting with inability to
modify these settings.
3. In case of connectivity issues or abnormal video quality.
How to do the reset?
Using a pointed object, such as a paper clip, press and hold the reset button for at least 5
seconds or until the Power LED goes off.
www.acti.com
Hardware Manual
13
5) Power LED
The Power LED turns when the camera is powered on and the system is running. on
6) Digital Input / Output (DI/DO) and Audio Input / Output
This connector connects to digital input or output devices, such as an alarm trigger, panic
button, etc., as well as audio input and output devices, such as microphones and speakers.
Digital Input (DI) and Digital Output (DO) devices are used in applications like motion
detection, event triggering, alarm notifications, etc. See How to Connect DI/DO and Audio
Devices on page for more information. 25
7) DC Iris Port
When DC iris lens is used, connect the lens cable to this port. a
www.acti.com
Hardware Manual
14
E217
E222
1) Serial Port
This port connects to serial devices via RS-485 or RS- protocols. Use the supplied serial 422
port terminal block to connect the wires from the serial device to the camera.
See on page for How to Connect a Serial Device (for E23B, E217, E222 only) 32
connection details.
2) Ethernet Port
Connects to a network using an Ethernet cable.
3) Memory Card Slot
Insert a memory card into this slot for local recording purposes. See How to Install /
Remove the Memory Card on page for more information. 36
NOTE: Supports microSDHC and microSDXC cards.
4) Reset Button
The purpose of reset button is to restore the factory default settings of the camera, including
administrator’s password.
The reset button can be used for following purposes:
www.acti.com
Hardware Manual
15
1. The administrator s password has been forgotten and therefore the camera cannot be ’
accessed.
2. In case of IP address, mask, or allow/deny filter related issues, resulting with inability to
modify these settings.
3. In case of connectivity issues or abnormal video quality.
How to do the reset?
Using a pointed object, such as a paper clip, press and hold the reset button for at least 5
seconds or until the Power LED goes off.
5) Power LED
The Power LED turns when the camera is powered on and the system is running. on
6) Digital Input / Output (DI/DO) and Audio Input / Output
This connector connects to digital input or output devices, such as an alarm trigger, panic
button, etc., as well as audio input and output devices, such as microphones and speakers.
Digital Input (DI) and Digital Output (DO) devices are used in applications like motion
detection, event triggering, alarm notifications, etc. See How to Connect DI/DO and Audio
Devices on page for more information. 25
7) DC 12V Power Input
In case the camera is connected to a non-PoE (Power over Ethernet) switch, use this
connector to connect the camera to an external power adapter (not included). See How to
Connect a Power Adapter (for E217, E222 only) on page for more information. 30
8) DC Iris Port
When DC iris lens is used, connect the lens cable to this port. a
www.acti.com
Hardware Manual
16
Mounting Options
The camera can be installed both indoors and outdoors. For outdoor installation, additional
waterproof housing is required. Below are several mounting options that you can use to install the
camera. Select the most suitable solution for your installation environment.
Mount Types
Accessories
Ceiling or Wall
(Indoor)
The camera comes with a mounting block which is used to
mount an additional bracket to complete the installation. The
additional bracket is not included in the camera package. You
may use the bracket from a local supplier or purchase ACTi’s
indoor bracket.
See on page for more Indoor Installation Procedures 17
information.
PMAX-1104
Wall
(Outdoor)
A waterproof housing is required when installing the camera
outdoors.
Pole Mount
Suitable when mounting the camera on vertical poles. The
camera must be enclosed inside the waterproof housing.
Corner Mount
Suitable when mounting the camera on a corner wall. The
camera must be enclosed inside the waterproof housing.
NOTE:
For more information about the mounting solutions and accessories, please check the
Mounting Accessory Selector in our website (http://www.acti.com/mountingselector).
The above mounting accessories are not included in the package. Contact your sales
agents to purchase.
www.acti.com
Hardware Manual
17
Indoor Installation Procedures
This section describes the procedures in installing the camera indoors using PMAX-1104 indoor
bracket (purchased separately).
When using brackets from other manufacturers, check the installation guide included in the
bracket to install the camera. Similar procedures apply when using brackets from other camera
manufacturers.
NOTE: Some pictures in this documentation only show one type of camera lens; this means that
the procedures are applicable to other types of lens, unless specified otherwise.
Step 1: Attach the Camera Lens
NOTE: To avoid scratches or leaving fingerprints on the lens, it is recommended to retain the
protective cap covering the lens until the camera is completely installed.
1. Unpack the camera and check the bundled camera lens. The camera comes with one of the
following lens.
D21FA E21FA /
D22FA / E22FA /
E217 / E270
D2xVA / E2xVA / E2xA /
E23B / E222 / E271
2. Pull to remove the cap covering the camera lens holder.
or
or
www.acti.com
Hardware Manual
18
3. Twist and pull to remove the cap covering the thread end of the lens. ed
D21FA E21FA /
D22FA / E22FA /
E217 / E270
D2xVA / E2xVA / E2xA /
E23B / E271 E222 /
4. Attach the lens to the camera.
5. For cameras models D2xVA, E2xVA, E2xA, E23B, E222, and E271 connect the lens cable to ,
the DC-iris port.
or
or
or
www.acti.com
Hardware Manual
19
Step 2: Attach the Mounting Block
Determine where you want to install the camera or . : on the ceiling on the wall
If the camera will be installed on the ceiling , attach the mounting block on the top side
of the camera.
If the camera will be installed on the wall, attach the mounting block on the bottom
side of the camera. Secure the mounting block to the camera using the two (2) screws
included in the mounting block package.
www.acti.com
Hardware Manual
20
Step 3: Mount the Indoor Bracket
NOTE:
The indoor bracket is not included in the camera package and must be purchased
separately.
The pictures on the succeeding pages are for reference only, camera labels and
appearance may vary depending on camera model.
Before installing the bracket, make sure the ceiling or wall can bear more than the weight of the
camera and its accessories.
Install the indoor bracket to the ceiling or wall using the three (3) screws included in the bracket
package.
Step 4: Attach the Camera to the Bracket
NOTE: The following images show the mounting bracket attached on the bottom side of the
camera. Same procedures apply when attaching the mounting bracket on the top side.
1. If necessary, insert a memory card into the memory card slot of the camera with the metal
contacts facing down. Push until the card clicks into place. See How to Install / Remove the
Memory Card on page for more information. 36
www.acti.com
Hardware Manual
21
2. Slightly loosen the knurled knob.
3. Screw the camera bracket by its mounting block. to the
4. Tighten the hand knob until the camera is secured to the bracket.
5. Adjust the camera angle.
www.acti.com
Hardware Manual
22
6. Tighten the knurled knob to fix the camera position.
7. Remove the protective cap from the lens (if any).
www.acti.com
Hardware Manual
23
Step 5: Connect the Cable(s)
1. Connect the network cable to the Ethernet port of the camera.
2. If necessary, connect audio input/output or DI/DO devices to the camera. See How to
Connect DI/DO and Audio Devices on page for more information. 25
3. Connect the other end of the network cable to a switch or injector. Then, connect the switch
or injector to a network, PC and a power source. See Power-over-Ethernet (PoE) connection
example below.
Network
AC Power
Source
PoE Injector /
PoE Switch
Power Cable
Ethernet Cable
Ethernet Cable
(Data + Power)
Ethernet Cable
(Data)
Camera
www.acti.com
Hardware Manual
24
Step 6: Access the Camera Live View
See on page for more information on how to access the Live View of Accessing the Camera 39
the camera.
Step 7: Adjust the Viewing Angle and Focus
Based on the live view, adjust the focus and the viewing angle of the camera. Adjustments vary
depending on model, for detailed information, see:
D21 / E21FA FA on page 34
D22FA / E22FA / E217 / E270 on page 34
D2xVA / E2xVA / E23A / E23B / E24A / E25A / E222 / 71E2 on page 35
www.acti.com
Hardware Manual
25
Other Connections (Optional)
This section describes the procedures in preparing the external devices that you can connect to
the camera. The camera supports Digital Input and Output (DI/DO), Audio Input and Output
devices, and DC12V power input (for E222 only) that can be connected to the camera using the
bundled terminal blocks. The use of these devices, however, is optional.
How to Connect DI/DO and Audio Devices
Depending on your surveillance needs, you may connect digital input / output or audio input /
output devices to your camera. The camera comes with one (1) terminal block for both digital and
audio input/output devices.
How to Connect DI/DO Devices
Digital Input (DI) devices can be used to notify the camera about an activity in the camera site. DI
can be triggers of events. For example, you can connect a “panic button” to the camera; as such
when the panic button is pressed, the alarm signal will be sent through the camera. Other
common DI device applications are emergency button, smoke detector, passive infrared sensor,
etc.
Digital Output (DO) devices are external devices that are activated by the camera upon an event
inside the camera. For example, you can connect an “alarm horn” to the camera; as such when
an event occurs inside the camera (e.g. detected intruder), the alarm horn will sound. Other
common DO device applications are motion-triggered lights, electric fence, magnetic door locks,
etc.
www.acti.com
Hardware Manual
26
1. Press and hold the orange tab as you insert the wire through the pin slot, then release the
orange tab to secure the wire. The terminal block label varies depending on camera model.
D2xxA / E2xxA / E2xA / E27x
E23B E217 / E222 /
2. To connect digital input / output devices (DI/DO), map the pins to one of the pin combinations
below:
Device
Pin
Mapping Instructions
Digital Output O) (D
DIO PW / 12V
Connect the wires of the output device to
DIO 12V PW or and DO.
DO
Digital Input I) (D
DIO GND or
GND
Connect the wires of the input device to or DIO GND
GND and DI.
DI
3. After mapping the pins, connect the terminal block to the connector of the camera. I/O
DI/DO Connection Specifications
The table below shows the DI/DO connection specifications:
Device
DI
Connection design
TTL - compatible logic levels
Voltage
To trigger (low)
Logic level 0: 0V ~ 0.4V
Normal (high)
Logic level 1: 3.1V ~ 30V
Current
10mA ~ 100mA
DO
Connection design
Transistor (Open Collector)
Voltage & Current
< 24V DC, < 50mA
For DI/DO Use
For DI/DO Use
www.acti.com
Hardware Manual
27
Typical Connection
Based on these specifications, if the DI device has a voltage of 0V ~ 30V or the DO device has a
voltage of < 24V (< 50mA), then the camera can supply internal power to these devices and there
is no need to connect the DI/DO device to an external power source.
Use the and pins to connect a DI device and use the and pins to DIO GND DI DIO PW DO
connect a DO device. See wiring scheme below:
High Voltage DO Device Connection
Even though the camera provides 12V power, this may not be enough for some high voltage DO
devices, such as a ceiling light or a motor that opens or closes a gate. In this case, there is a
need to connect an external relay. See wiring scheme below:
Note that when choosing an appropriate relay, please refer to its specifications and make sure
they match the above design. The triggering circuit voltage has to be around 12V DC and the
switch-controlled circuit voltage has to match the external power supply (e.g. 110V AC or 220V
AC).
www.acti.com
Hardware Manual
28
The illustration below is a graphic example of connecting a relay to a high voltage DO device.
Relay
(DO1 Device)
Camera
Illuminator
110V-220V AC
External Power
Source
NOTE: For more information on DI/DO connections, please refer to the Knowledge Base
article All About Digital Input and Digital Output downloadable from the link below
( http://Download.acti.com?id=516).
www.acti.com
Hardware Manual
29
How to Connect Audio Devices
Audio input / output devices, such as an active microphone or speaker can be connected to the
camera using the supplied terminal block.
1. Press and hold the orange tab as you insert the wire through the pin slot, then release the
orange tab to secure the wire.
D2xxA / E2xxA / E2xA / E27x
E23B E217 / E222 /
2. To connect audio devices, map the pins to one of the pin combinations below:
Device
Pin
Mapping Instructions
Audio Output (AO)
AO GND
Connect the wires of the audio output device to AO
GND OUT and A_ or AO.
A_OUT or
AO
Audio Input ( ) A1
AI GND
Connect the wires of the audio input device to AI
GND A_IN and or AI.
A_IN or AI
NOTE: For more information about AUDIO in connections, please refer to the Knowledge
Base article How to Use Audio-in of ACTi Cameras, downloadable from the link below
( http://Download.acti.com?id=534).
3. When ready, connect the terminal block to connector of the camera. the I/O
For Audio Use
For Audio Use
www.acti.com
Hardware Manual
30
How to Connect a Power Adapter (for E217, E222 only)
In case of using a non-PoE switch or your PoE switch has limited power supply, you can
purchase a power adapter and directly connect the camera to a power outlet. The power adapter
must be connected to the supplied terminal block before use.
To do this, follow the procedures below:
1. Loosen the screws of the and pins of the power terminal block. 12V GND
2. Take note that a standard power adapter cable has two (2) different wires:
3. Connect wire with the white stripe to the pin and the other to the pin. the 12V GND
NOTE: The terminal block pictures are for reference only, note that actual label placement
may vary per model.
White stripe: Connects to 12V Pin
Connects to GND Pin
www.acti.com
Hardware Manual
31
4. Tighten the screws of the pin and the pins to secure the wire connection. 12V GND
5. When ready, connect the prepared power adapter to the connector of the cameraPOWER .
Below is an example of a power adapter with an attached terminal block.
NOTE: The power adapter is not bundled in the package.
Produktspecifikationer
| Varumärke: | Acti |
| Kategori: | övervakningskamera |
| Modell: | E22VA |
Behöver du hjälp?
Om du behöver hjälp med Acti E22VA ställ en fråga nedan och andra användare kommer att svara dig
övervakningskamera Acti Manualer
1 Januari 2025
27 Oktober 2024
27 Oktober 2024
18 September 2024
16 September 2024
12 September 2024
12 September 2024
12 September 2024
12 September 2024
9 September 2024
övervakningskamera Manualer
- SMC
- DVDO
- DSC
- Campark
- Gewiss
- Leviton
- Aigis
- Promise Technology
- Vimtag
- Aldi
- Digimerge
- Niceboy
- Manhattan
- AVer
- Schwaiger
Nyaste övervakningskamera Manualer
15 Juni 2025
14 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
12 Juni 2025