Acti Z714 Bruksanvisning
Acti
övervakningskamera
Z714
Läs gratis den bruksanvisning för Acti Z714 (25 sidor) i kategorin övervakningskamera. Guiden har ansetts hjälpsam av 11 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 6 recensioner. Har du en fråga om Acti Z714 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/25
Outdoor Dome
Hardware Manual
Z94 Z95 Z97, Z98, Z710, Z714 , ,
Ver. 20 /09/22 05
www.acti.com
Hardware Manual
2
Table of Contents
Precautions 3
Safety Instructions .................................................................................... 5
Introduction 6
List of Models ........................................................................................... 6
Package Contents 7.....................................................................................
Physical Description .................................................................................. 8
Mounting Options .................................................................................. 11
Installation Procedures 12
Step 1: Prepare for Installation ...............................................................12
Step 2: Route the Cables ......................................................................... 13
Step 3: Mount the Camera ...................................................................... 14
Step 4: Connect and Manage the Cables .................................................15
Using the Cable Gland ................................................................. 15
Using a Power Adapter (Optional) ................................................ 17
Step 5: Connect to Network .................................................................... 18
Step 6: Access the Camera Live View ....................................................... 18
Step 7: Adjust the Viewing Angle and Orientation ................................... 18
Step 8: Close the Dome Cover ................................................................. 19
Accessing the Camera 20
Configure the IP Addresses ..................................................................... 20
Using DHCP Server to Assign IP Addresses ................................ 20
Using the Default Camera IP Address .......................................... 21
Access the Camera .................................................................................. 23
www.acti.com
Hardware Manual
3
Precautions
Read these instructions
You should read all the safety and operating instructions before using this product.
Heed all warnings
You must adhere to all the warnings on the product and in the instruction manual. Failure to follow
the safety instruction given may directly endanger people, cause damage to the system or to other
equipment.
Servicing
Do not attempt to service this video device yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Trademarks
All names used in this manual are probably registered trademarks of respective companies.
Liability
Every reasonable care has been taken during the writing this manual. Please inform your local of
office if you find any inaccuracies or omissions. We cannot be held responsible for any
typographical or technical errors and reserve the right to make changes to the product and
manuals without prior notice.
www.acti.com
Hardware Manual
4
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Caution: The user is cautioned that changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
LVD / EMC Directive
This product complies with the European Low Voltage Directive 2014/35/EU and
EMC Directive 2014/30/EU.
WEEE Directive–2012/19/EU
The product this manual refers to is covered by the Waste Electrical & Electronic
Equipment (WEEE) Directive and must be disposed of in a responsible manner.
Battery Directive-2013/56/EC
Battery in the product complies with the European Battery Directive
2013/56/EC.For proper recycling,return the battery to your supplier or to a
designated collection point.
www.acti.com
Hardware Manual
5
Safety Instructions
Cleaning
Disconnect this video product from the power supply before cleaning.
Attachments
Do not use attachments not recommended by the video product manufacturer as they may cause
hazards.
Water and Moisture
Install other devices (such as PoE injector, alarm, etc.) that will be used with the camera in a dry
place protected from water.
Servicing
Do not attempt to service this video product yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Damage Requiring service
Disconnect this video product from the power supply immediately and refer servicing to qualified
service personnel under the following conditions.
1) When the power-supply cord or plug is damaged
2) If liquid has been spilled, or objects have fallen into the video product.
3) If the video product has been directly exposed to rain or water.
4) If the video product does not operate normally by following the operating Instructions in this
manual. Adjust only those controls that are covered by the instruction manual, as an improper
adjustment ther controls may result in damage, and will often require extensive work by a of o
qualified technician to restore the video product to its normal operation.
Safety Check
Upon completion of any service or repairs to this video product, ask the service technician to
perform safety checks to determine the video product is in proper operating condition.if
• Never look at the transmit laser while the power is on. Never look
directly at the ber ports and the ber cable ends when they are
powered on.
• Use of controls or adjustments to the performance or procedures
other than those specied herein may result in hazardous laser
emissions.
www.acti.com
Hardware Manual
6
Introduction
List of Models
This hardware manual contains the following models:
Z94
2MP Outdoor Mini Dome with D/N, Adaptive IR, Superior WDR,
SLLS, Fixed L ens
Z95
4MP Outdoor Mini Dome with D/N, Adaptive IR, Superior WDR,
SLLS, Fixed L ens
Z97
2MP Outdoor Mini Dome with D/N, Adaptive IR, Superior WDR,
SLLS, Fixed Lens
Z98
4MP Outdoor Mini Dome with D/N, Adaptive IR, Superior WDR,
SLLS, Fixed Lens
Z710
8MP Outdoor Mini Dome with D/N, Adaptive IR, Superior WDR,
SLLS, Fixed Lens
Z714
8MP Outdoor Mini Dome with D/N, Adaptive IR, Superior WDR,
SLLS, Fixed Lens
www.acti.com
Hardware Manual
7
Package Contents
Check if the camera package comes with the following items:
Camera
Cable Gland
with Rubber and Washer
Wrench
Mounting Screw Kit
Drill Template
Quick Guides &
Warranty Card
IMPORTANT: When the camera is taken out from the box, the lens cover is covered by a thin film.
DO NOT remove this film. It is used to protect the lens cover from scratches or fingerprint marks
which may happen during installation. Remove this film only after the camera is securely installed
and all connections are complete.
Drill Template
Warranty Card
www.acti.com
Hardware Manual
8
Physical Description
Z714
Item
Description
1
Reset Button
Press and hold to reset the camera to default ctory settings.fa
2
Memory Card Slot
Insert a memory card into the slot for local recording.
3
DC 12V
In case the camera is connected to a non-PoE (Power over
Ethernet) switch, use this connector to connect the camera to an
external power adapter (not included). See Using a Power
Adapter (Optional) on page for more information.17
4
Ethernet Port
Connects to a network using an Ethernet cable with RJ-45
connector.
www.acti.com
Hardware Manual
9
Z94, Z95, Z710
Item
Description
1
DC 12V
In case the camera is connected to a non-PoE (Power over
Ethernet) switch, use this connector to connect the camera to an
external power adapter (not included). See Using a Power
Adapter (Optional) on page for more information.17
2
Ethernet Port
Connects to a network using an Ethernet cable with RJ-45
connector.
www.acti.com
Hardware Manual
10
Z97, Z98
Item
Description
1
Memory Card Slot
Insert a memory card into the slot for local recording.
2
DC 12V
In case the camera is connected to a non-PoE (Power over
Ethernet) switch, use this connector to connect the camera to an
external power adapter (not included). See Using a Power
Adapter (Optional) on page for more information.17
3
Ethernet Port
Connects to a network using an Ethernet cable with RJ-45
connector.
www.acti.com
Hardware Manual
11
Mounting Options
Select the most suitable solution for your installation environment. The camera can be
mounted by either of the following methods:
Mount Types
Accessories
Surface Mount
Suitable when mounting the camera directly on walls or ceilings without
additional mounting accessories. See on page Installation Procedures
12 for more information.
Gangbox
Suitable when mounting the camera on a 4” Round or 4” Octagon
Gangbox. The use of gangbox is lawfully required in some areas in the
United States. A Gangbox Converter (purchased separately) is required
for this type of installation.
Wall Mount
Suitable when mounting the camera on the wall with the camera facing
down as if installed on the ceiling. The Wall Mount (optional mounting
accessory) is required for this type of installation.
Pendant Mount
Suitable when installing the camera on high ceilings where a straight
tube is used to lower the camera. The Pendant Mount with Mount Kit
(optional accessory set) is required for this type of installation.
Pole mount
Suitable when installing the camera on a vertical pole. The Pole mount
(optional accessory set) is required for this type of installation.
NOTE:
• For more information about the mounting solutions and accessories, please check the
Mounting Accessory Selector in our website (http://www.acti.com/mountingselector).
• The above mounting accessories are not included in the package. Contact your sales
agents to purchase.
www.acti.com
Hardware Manual
12
Installation Procedures
This section describes procedures in mounting the camera on a flat surface.
NOTE: The camera images on this documentation are for reference only and may be different
from the actual camera.
Step 1: Prepare for Installation
1. Before installing the camera, prepare the additional accessories required for installation.
2. Determine whether the cable will go through a hole on the surface or be routed along the
surface. Note also the direction to which the cable will be routed to attach the bundled drill
template on the surface according to the direction of the cable.
3. Drill the screw holes Depending on the material of the surface where the camera will be .
installed, it may be necessary to drill the two (2) screw holes and use the supplied screw tox.
4. Loosen the two (2) screws using the bundled wrench then lift the dome cover.
NOTE:
• The dome cover is attached to the camera body by a string; do not abruptly lift the
dome cover!
www.acti.com
Hardware Manual
13
Step 2: Route the Cables
Determine whether the cable will pass through a hole on the surface or be routed along the
surface:
If the cable will pass through a hole on the surface:
1. Drill the hole for the cable on the surface.
2. Route the cable from the network side and connect it to the Ethernet port of the camera.
NOTE: If the camera will be installed outdoors or in places wherein environmental factors
change drastically, make sure to waterproof the cable connection; see Step 4 Connect and :
Manage the Cable on page for instructions.15
3. Push the cable through the hole on the surface.
4. Skip to on page .Step 3 Mount the Camera: 14
If the cable will be routed along the surface, route the cable through the gap on the side of
the camera.
Side Cable Hole
Produktspecifikationer
| Varumärke: | Acti |
| Kategori: | övervakningskamera |
| Modell: | Z714 |
Behöver du hjälp?
Om du behöver hjälp med Acti Z714 ställ en fråga nedan och andra användare kommer att svara dig
övervakningskamera Acti Manualer
1 Januari 2025
27 Oktober 2024
27 Oktober 2024
18 September 2024
16 September 2024
12 September 2024
12 September 2024
12 September 2024
12 September 2024
9 September 2024
övervakningskamera Manualer
- Marshall
- BRK
- Pentatech
- Broan
- Accsoon
- Sir Gawain
- Securetech
- EverFocus
- Dahua Technology
- Synology
- Conbrov
- Steren
- Defender
- Adj
- Astak
Nyaste övervakningskamera Manualer
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
12 Juni 2025
12 Juni 2025
2 Juni 2025