Adam Hall 87406 Bruksanvisning
                    Adam Hall
                    
                    Inte kategoriserad
                    
                    87406
                
                                
    Läs gratis den bruksanvisning för Adam Hall 87406 (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 18 personer och har ett genomsnittsbetyg på 4.0 stjärnor baserat på 9.5 recensioner. Har du en fråga om Adam Hall 87406 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
                        Sida 1/2
                    
                    
                    
Adam Hall GmbH | Adam-Hall-Str. 1 | 61267 Neu-Anspach | Germany
Phone: +49 6081 9419-0 |  .com  adamhall
8740x
RACK DRAWER STEEL 2 U / 3 U / 4 U / 6 U
SAFETY INFORMATION
1.  Please read these instructions carefully. 
2.  Keep all information and instructions in a safe place. 
3.  Follow the instructions. 
4.  Observe all safety warnings. Never remove safety warnings or other information from the 
equipment. 
5.  Use the equipment only in the intended manner and for the intended purpose. 
6.  Use  only  sufficiently  stable  and  compatible  stands  and/or  mounts  (for  fixed  installations). 
Make  certain  that  wall  mounts  are  properly  installed  and  secured.  Make  certain  that  the 
equipment is installed securely and cannot fall down. 
7.  During installation, observe the applicable safety regulations for your country. 
8.  Never install and operate the equipment near radiators, heat registers, ovens or other sourc
-
es of heat. Make certain that the equipment is always installed so that is cooled sufficiently 
and cannot overheat. 
9.  Never place sources of ignition, e.g., burning candles, on the equipment. 
10.  Ventilation slits must not be blocked. 
11.  Do not use this equipment in the immediate vicinity of water (does not apply to special out
-
door equipment - in this case, observe the special instructions noted below. Do not expose 
this equipment to flammable materials, fluids or gases. 
12.  Make certain that dripping or splashed water cannot enter the equipment. Do not place con
-
tainers filled with liquids, such as vases or drinking vessels, on the equipment. 
13.  Make certain that objects cannot fall into the device. 
14.  Use this equipment only with the accessories recommended and intended by the manufac
-
turer. 
15.  Do not open or modify this equipment. 
16.  After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., 
due to tripping hazards. 
17.  During transport, make certain that the equipment cannot fall down and possibly cause prop
-
erty damage and personal injuries.
18.  If your equipment is no longer functioning properly, if fluids or objects have gotten inside the 
equipment or if it has been damaged in another way, switch it off immediately and unplug 
it from the mains outlet (if it is a powered device). This equipment may only be repaired by 
authorized, qualified personnel. 
19.  Clean the equipment using a dry cloth. 
20.  Comply with all applicable disposal laws in your country. During disposal of packaging, please 
separate plastic and paper/cardboard. 
21.  Plastic bags must be kept out of reach of children.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY 
You can find our current warranty conditions and limitation of liability at: https://cdn-shop.adam
-
hall.com/media/pdf/MANUFACTURERS-DECLARATIONS_ADAM_HALL.pdf
To request warranty  service  for  a  product, please  contact  Adam  Hall GmbH, Adam-Hall-Str. 1, 
61267 Neu Anspach / Email Info@adamhall.com / 49 (0) 6081 / 9419-0
         PROPER DISPOSAL OF THIS PRODUCT 
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT) 
(Valid in the European Union and other European countries with waste separation) 
This symbol on the product, or the documents accompanying the product, indicates that this ap
-
pliance may not be treated as household waste. This is to avoid environmental damage or person-
al injury due to uncontrolled waste disposal. Please dispose of this product separately from other 
waste and have it recycled to promote sustainable economic activity.
Product number 87402 87403 87404 87406
Product type 19" Rack Drawers
Material Steel
Surface Powder coated
Color Black
Outside height 2 U 3 U 4 U 6 U
Outside width (mm) 434 434 434 434
Outside depth (mm) 392 392 392 392
Inside height (mm) 74 120 175 255
Inside width (mm) 401 401 401 401
Internal depth (mm) 373 373 373 373
Max. load capacity 25 kg
Material thickness (mm) 2 
Weight 6.9 kg 8.1 kg 9.3 kg 13.792 kg
DESCRIPTION
Lockable 19" rackmounting drawer module
• Full extension ball race drawer slide
• Drawer on ball-bearing slide-in rail
• Incl. Cylinder lock and 2 keys
• features a coupling on the drawer slide, allowing for removal
• Without insert
SPECIFICATIONS
Produktspecifikationer
| Varumärke: | Adam Hall | 
| Kategori: | Inte kategoriserad | 
| Modell: | 87406 | 
Behöver du hjälp?
Om du behöver hjälp med Adam Hall 87406 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Adam Hall Manualer
                        
                         16 September 2024
                        
                    
                                                            
                        
                         16 September 2024
                        
                    
                                                            
                        
                         16 September 2024
                        
                    
                                                            
                        
                         16 September 2024
                        
                    
                                                            
                        
                         16 September 2024
                        
                    
                                                            
                        
                         16 September 2024
                        
                    
                                                            
                        
                         16 September 2024
                        
                    
                                                            
                        
                         16 September 2024
                        
                    
                                                            
                        
                         16 September 2024
                        
                    
                                                            
                        
                         16 September 2024
                        
                    
                                                            Inte kategoriserad Manualer
- Basbau
- Babylonia
- Toddy
- Korona
- Wavtech
- Ibm
- AJ.BA
- Tenda
- SolarEdge
- Mophie
- Kicker
- Berner
- Njoy
- Proaim
- Winix
Nyaste Inte kategoriserad Manualer
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025