Adam Hall SLED1USBPRO Bruksanvisning

Adam Hall Lampa SLED1USBPRO

Läs gratis den bruksanvisning för Adam Hall SLED1USBPRO (2 sidor) i kategorin Lampa. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 6.5 recensioner. Har du en fråga om Adam Hall SLED1USBPRO eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

Adam Hall GmbH · Daimlerstr. 9 · 61267 Neu-Anspach · Germany

Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: mail@adamhall.com

SAFETY INFORMATION

1. Please read these instructions carefully.

2. Keep all information and instructions in a safe place.

3. Follow the instructions.

4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.

5. Use the equipment only in the intended manner and for the intended purpose.

6. Use only sufficiently stable and compatible stands and/or mounts (for fixed installations). Make certain

that wall mounts are properly installed and secured. Make certain that the equipment is installed securely

and cannot fall down.

7. During installation, observe the applicable safety regulations for your country.

8. Never install and operate the equipment near radiators, heat registers, ovens or other sources of heat. Make

certain that the equipment is always installed so that is cooled sufficiently and cannot overheat.

9. Never place sources of ignition, e.g., burning candles, on the equipment.

10. Ventilation slits must not be blocked.

11. Do not use this equipment in the immediate vicinity of water (does not apply to special outdoor equipment

- in this case, observe the special instructions noted below. Do not expose this equipment to flammable

materials, fluids or gases.

12. Make certain that dripping or splashed water cannot enter the equipment. Do not place containers filled

with liquids, such as vases or drinking vessels, on the equipment.

13. Make certain that objects cannot fall into the device.

14. Use this equipment only with the accessories recommended and intended by the manufacturer.

15. Do not open or modify this equipment.

16. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to

tripping hazards.

17. During transport, make certain that the equipment cannot fall down and possibly cause property damage

and personal injuries.

18. If your equipment is no longer functioning properly, if fluids or objects have gotten inside the equipment or

if it has been damaged in another way, switch it off immediately and unplug it from the mains outlet (if it is

a powered device). This equipment may only be repaired by authorized, qualified personnel.

19. Clean the equipment using a dry cloth.

20. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate

plastic and paper/cardboard.

21. Plastic bags must be kept out of reach of children.

FOR EQUIPMENT THAT CONNECTS TO THE POWER MAINS:

22. If the equipment has been exposed to strong fluctuations in temperature (for example, after transport), do

not switch it on immediately. Moisture and condensation could damage the equipment. Do not switch on

the equipment until it has reached room temperature.

23. Before connecting the equipment to the power outlet, first verify that the mains voltage and frequency

match the values specified on the equipment. If the equipment has a voltage selection switch, connect

the equipment to the power outlet only if the equipment values and the mains power values match. If the

included power cord or power adapter does not fit in your wall outlet, contact your electrician.

24. Do not step on the power cord. Make certain that the power cable does not become kinked, especially at

the mains outlet and/or power adapter and the equipment connector.

25. When connecting the equipment, make certain that the power cord or power adapter is always freely

accessible. Always disconnect the equipment from the power supply if the equipment is not in use or if

you want to clean the equipment. Always unplug the power cord and power adapter from the power outlet

at the plug or adapter and not by pulling on the cord. Never touch the power cord and power adapter with

wet hands.

26. Whenever possible, avoid switching the equipment on and off in quick succession because otherwise this

can shorten the useful life of the equipment.

27. To disconnect the equipment from the power mains completely, unplug the power cord or power adapter

from the power outlet.

28. Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or

before extended periods of disuse.

CAUTION:

CA U TIO N

RI SK OF SELE CTRI C HO CK

DO N O NOT PE

Never remove the cover, because otherwise there may be a risk of electric shock. There are no user serviceable

parts inside. Have repairs carried out only by qualified service personnel.

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to

the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electrical shock.

The exclamation mark within an equilateral triangle is intended to alert the user to the presence of

important operating and maintenance instructions.

MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY

You can find our current warranty conditions and limitation of liability at: http://www.adamhall.com/media/shop/

downloads/documents/manufacturersdeclarations.pdf

To request warranty service for a product, please contact Adam Hall GmbH, Daimler Straße 9, 61267 Neu Ans-

pach / Email Info@adamhall.com / 49 (0) 6081 / 9419-0

PROPER DISPOSAL OF THIS PRODUCT

(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)

(Valid in the European Union and other European countries with waste separation)

This symbol on the product, or the documents accompanying the product, indicates that this appliance may not

be treated as household waste. This is to avoid environmental damage or personal injury due to uncontrolled

waste disposal. Please dispose of this product separately from other waste and have it recycled to promote

sustainable economic activity.

SPECIFICATIONS

SLED1USBPRO

USB Gooseneck Lamp with 2 LEDs

Model name: SLED1PRO

Product type Gooseneck Lamp

Number of LEDs 2

Colour of LEDs white

Gooseneck length 165 mm

Switches yes

Switch levels 2 LED, off, 1 LED

Power Supply via USB connector

Optional power supply with power adapter no

Power consumption 0.12 W

Current consumption 25 mA

Weight 0.03 kg

Produktspecifikationer

Varumärke:	Adam Hall
Kategori:	Lampa
Modell:	SLED1USBPRO
Vikt:	33 g
Antal lampor:	2
Material:	Plast
Justerbar höjd:	Ja
Flexibel arm:	Ja
Produktens färg:	Svart
Strömkälla av typen:	USB
Produktlängd:	165 mm
Lampteknik:	LED