Ade Automatic-Z Bruksanvisning
Ade
Skärmaskin
Automatic-Z
Läs nedan 📖 manual på svenska för Ade Automatic-Z (20 sidor) i kategorin Skärmaskin. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/20
OPERATING MANUAL
Gravity Feed Slicers with automatic
Transmission
Model AUTOMATIC /AUTOMATIC-Z
Automatic_Automatic-Z-210504-Rev015-UM-en
Automatic
-
Z
Automatic
1 Automatic_Automatic-Z-210504-Rev015-UM-en
1. Content
Content ........................................................................................................................................... 1
1. FOREWORD ........................................................................................................................... 2
2. INTENDED USE ..................................................................................................................... 2
3. FIGURES ................................................................................................................................ 2
4. PREPARATION AND OPERATION ........................................................................................ 4
3.1 Opening the packaging ......................................................................................................... 4
3.2 Installation ............................................................................................................................. 4
3.3 Wiring.................................................................................................................................... 5
3.4 Operation .............................................................................................................................. 5
3.5 Operation in automatic mode ................................................................................................ 5
5. CONTROLS AND SAFETY DEVICES .................................................................................... 5
4.1 Controls ................................................................................................................................ 5
4.2 Mechanical safety devices .................................................................................................... 5
4.3 Testing .................................................................................................................................. 6
6. USING THE SLICER ............................................................................................................... 6
5.1 Operating procedure ............................................................................................................. 6
5.2 Option Counting Device ........................................................................................................ 6
7. MAINTENANCE AND CARE OF THE SLICER ....................................................................... 7
6.1 Cleaning ................................................................................................................................ 7
6.2 Lubricating ............................................................................................................................ 7
8. SHARPENING OPERATIONS ................................................................................................ 7
7.1 Sharpening the blade ............................................................................................................ 8
9. TRAINING ............................................................................................................................... 8
10. CLEANING AND MAINTENANCE .......................................................................................... 9
11. STORAGE AND TRANPORT.................................................................................................. 9
12. DISPOSAL .............................................................................................................................. 9
13. WARRANTY ........................................................................................................................... 9
14. TECHNICAL DATA ............................................................................................................... 10
15. CE AND CERTIFICATE OF CONFORMITY .......................................................................... 11
16. WIRING DIAGRAMS ............................................................................................................. 12
17. EXPLODED VIEWS .............................................................................................................. 13
18. SPARE PART LISTS ............................................................................................................ 16
Automatic_Automatic-Z-210504-Rev015-UM-en 2
2. FOREWORD
This symbol means: "Consult operating instructions". Read the instructions for use
carefully before use and follow all instructions provided therein. Keep the instructions
for use for future reference.
With this manual the manufacturer intends to furnish the customer with clear and concise
instructions for the use and maintenance of the machine, as well as information regarding the safety
devices with which it is fitted in order assure maximum efficiency throughout its service life.
The slicers may be updated; this eventuality shall not prejudice the explanations contained in the
manual.
Before starting up the slicer, you are advised to read this manual carefully.
Should this manual be damaged or lost, apply for a copy from the manufacturer without delay.
Many accidents are the result of insufficient familiarity with the machine and its safety devices.
Before starting work, read the instructions herein carefully and follow them to the letter.
The Gear Drive Gravity slicers have been designed to comply with the provisions of the European
community safety regulations. Consequently, each slicer is fitted with a plate featuring the "CE"
mark attesting to the products conformity with said provisions.
3. INTENDED USE
These slicers have been manufactured to slice:
- cooked and raw charcuterie,
- warm and cold meats,
- bread and cheese,
- stoneless fruit and vegetables.
The machine is intended for continuous operation in commercial gastronomic applications. They
can slice thicknesses up to 15mm.
Slicers are not suitable for cutting frozen goods, charcuterie and meat on the bone
or fruit with stones.
Any attempt to slice said products or similar foods may result in serious damage to
the machine and shall cause the warranty to become void.
4. FIGURES
Fig. 1
Produktspecifikationer
| Varumärke: | Ade |
| Kategori: | Skärmaskin |
| Modell: | Automatic-Z |
Behöver du hjälp?
Om du behöver hjälp med Ade Automatic-Z ställ en fråga nedan och andra användare kommer att svara dig
Skärmaskin Ade Manualer
24 September 2024
24 September 2024
24 September 2024
16 September 2024
16 September 2024
16 September 2024
3 September 2024
2 September 2024
20 Augusti 2024
15 Augusti 2024
Skärmaskin Manualer
- Skärmaskin Electrolux
- Skärmaskin Bosch
- Skärmaskin Kenwood
- Skärmaskin Quigg
- Skärmaskin Unold
- Skärmaskin Tefal
- Skärmaskin Ambiano
- Skärmaskin Ariete
- Skärmaskin Bartscher
- Skärmaskin Toolland
- Skärmaskin Orbegozo
- Skärmaskin Princess
- Skärmaskin Brother
- Skärmaskin Ozito
- Skärmaskin Gude
- Skärmaskin Fagor
- Skärmaskin Severin
- Skärmaskin Gorenje
- Skärmaskin Silvercrest
- Skärmaskin Makita
- Skärmaskin FAC
- Skärmaskin Korona
- Skärmaskin Saturn
- Skärmaskin Black And Decker
- Skärmaskin Tristar
- Skärmaskin Domo
- Skärmaskin Trisa
- Skärmaskin Livoo
- Skärmaskin Skil
- Skärmaskin OK
- Skärmaskin Hyundai
- Skärmaskin Bestron
- Skärmaskin Oster
- Skärmaskin ECG
- Skärmaskin Jata
- Skärmaskin Melissa
- Skärmaskin Magic Chef
- Skärmaskin Swan
- Skärmaskin Clatronic
- Skärmaskin Fritel
- Skärmaskin Russell Hobbs
- Skärmaskin Sencor
- Skärmaskin Cuisinart
- Skärmaskin Festool
- Skärmaskin Blaupunkt
- Skärmaskin Concept
- Skärmaskin Sunbeam
- Skärmaskin Hikoki
- Skärmaskin Dremel
- Skärmaskin Ernesto
- Skärmaskin Beper
- Skärmaskin Hendi
- Skärmaskin Heinner
- Skärmaskin Eldom
- Skärmaskin Philco
- Skärmaskin Trebs
- Skärmaskin Mach
- Skärmaskin H.Koenig
- Skärmaskin Perel
- Skärmaskin GOTIE
- Skärmaskin Beem
- Skärmaskin Exquisit
- Skärmaskin Proline
- Skärmaskin Zelmer
- Skärmaskin Nutrichef
- Skärmaskin Genius
- Skärmaskin ETA
- Skärmaskin Bomann
- Skärmaskin Powerplus
- Skärmaskin Graef
- Skärmaskin Ufesa
- Skärmaskin Rommelsbacher
- Skärmaskin Wilfa
- Skärmaskin Presto
- Skärmaskin Boss
- Skärmaskin Camry
- Skärmaskin Sammic
- Skärmaskin Bifinett
- Skärmaskin Primo
- Skärmaskin Clas Ohlson
- Skärmaskin Gastroback
- Skärmaskin Powerfix
- Skärmaskin Saro
- Skärmaskin MPM
- Skärmaskin Rotel
- Skärmaskin Ices
- Skärmaskin Hobart
- Skärmaskin RGV
- Skärmaskin Team
- Skärmaskin ProfiCook
- Skärmaskin Nevir
- Skärmaskin CaterChef
- Skärmaskin G3 Ferrari
- Skärmaskin Magimix
- Skärmaskin Efbe-schott
- Skärmaskin Gourmetmaxx
- Skärmaskin Makeblock
- Skärmaskin Turmix
- Skärmaskin Ritter
- Skärmaskin OXO
- Skärmaskin Cigweld
- Skärmaskin Nesco
- Skärmaskin Waves
- Skärmaskin Coline
- Skärmaskin JAC
- Skärmaskin De Buyer
- Skärmaskin Cecotec
- Skärmaskin Maruyama
- Skärmaskin RIDGID
- Skärmaskin Kalorik
- Skärmaskin Westfalia
- Skärmaskin Brandson
- Skärmaskin Mia
- Skärmaskin Khind
- Skärmaskin Gastronoma
- Skärmaskin Rösle
- Skärmaskin Globe
- Skärmaskin Riviera And Bar
- Skärmaskin Venga
- Skärmaskin Domoclip
- Skärmaskin Emga
- Skärmaskin Baker's Mark
- Skärmaskin Avantco
- Skärmaskin Kogan
- Skärmaskin Wolfcraft
- Skärmaskin Esperanza
- Skärmaskin PowerTec Kitchen
- Skärmaskin Panduit
- Skärmaskin Thane
- Skärmaskin Berkel
- Skärmaskin Louis Tellier
- Skärmaskin GARDE
- Skärmaskin Pro-Cut
- Skärmaskin Bifinet
- Skärmaskin Jokari
- Skärmaskin Kleva
- Skärmaskin Bron-Coucke
- Skärmaskin Enkho
- Skärmaskin Backyard Pro Butcher Series
- Skärmaskin Prince Castle
- Skärmaskin Boska
- Skärmaskin Borner
- Skärmaskin Backyard Pro
- Skärmaskin Royal Catering
- Skärmaskin Tescoma
- Skärmaskin Prowork
- Skärmaskin Weston
- Skärmaskin Ovela
- Skärmaskin Logan
Nyaste Skärmaskin Manualer
27 Mars 2025
27 Mars 2025
18 Februari 2025
13 Februari 2025
10 Februari 2025
8 Februari 2025
1 Februari 2025
31 Januari 2025
7 Januari 2025
6 Januari 2025