Advance AT200 Bruksanvisning
Advance
ej kategoriserat
AT200
Läs gratis den bruksanvisning för Advance AT200 (1 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 2 recensioner. Har du en fråga om Advance AT200 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/1

TECHNICAL DATA
______________________________________________________________________________
Version 9
AT200 Ultra Matt Cloth Gaffa® Tape
General Description
An Ultra Matt polythene extruded cloth tape coated with cable friendly
Adhesive that is designed to peel from clean surfaces.
• Ultra matt finish
• Flame retardant in situ
• Cable friendly clean peel adhesive
• Easy unwind very easy tear
• Wide colour range
• Can be written on
• Wide temperature range
• Water resistant in situ
• Good abrasion resistance
• Comfortable to awkward shapes
• Non corrosive adhesive
Technical Details
Typical Values
Thickness 0.26mm
Breaking Load 40 N/cm
Elongation 20%
Adhesion
Steel 4.5 N/cm
Self 2.6 N/cm
RoHS Compliant Yes
Service Temperature -10°C to +80°C
Application Temperature +10°C to +40°C
Storage Temperature +12°C to +25°C
AFERA
Association des Fabricants Européens de Rubans
Auto-Adhésifs.
NOTE
Except where indicated otherwise, the figures stated are
average values and should not be regarded as MAXIMUM or
MINIMUM values for specification purposes. The Company
reserves the right to improve products and any change in
specification will result in a re-issue of the relevant ‘Technical
Data Sheet’. Customers should satisfy themselves that the
tape is suitable for their requirements whether after such
modifications or otherwise. Please check that you have the
latest issue of the ‘Technical Data Sheet’. All slitting and
length tolerances are to British Standards. Before use the
customer is advised to consult the Health & Safety Data Sheet
produced by the company for this product, which is available
on request.
STORAGE
Tapes stored below the minimum recommended temperature
will require warming up to that level before use. Up to 24
hours may be required for this to take place.
Produktspecifikationer
Varumärke: | Advance |
Kategori: | ej kategoriserat |
Modell: | AT200 |
Bredd: | 50 mm |
Certifiering: | RoHS |
Material: | Tyg |
Längd: | 50 m |
Användarvänlig: | Ja |
Dubbelsidig: | Nej |
Minsta drifttemperatur: | -10 ° C |
Maximal arbetstemperatur: | 80 ° C |
Användningsområde: | Märkning |
Tejpens färg: | Silver |
Behöver du hjälp?
Om du behöver hjälp med Advance AT200 ställ en fråga nedan och andra användare kommer att svara dig
ej kategoriserat Advance Manualer
22 Augusti 2025
ej kategoriserat Manualer
- Sunding
- Sandstrøm
- Fantech
- Create
- Entes
- Balay
- Leisure
- Crown
- Vimar
- Bulbrite
- Deaf Bonce
- Monoprice
- Ashly
- Paradigm
- Profoto
Nyaste ej kategoriserat Manualer
22 Augusti 2025
22 Augusti 2025
22 Augusti 2025
22 Augusti 2025
22 Augusti 2025
22 Augusti 2025
22 Augusti 2025
21 Augusti 2025
21 Augusti 2025
21 Augusti 2025