AEG BBS1100 Bruksanvisning

AEG Sander BBS1100

Läs gratis den bruksanvisning för AEG BBS1100 (38 sidor) i kategorin Sander. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 3.6 stjärnor baserat på 1.5 recensioner. Har du en fråga om AEG BBS1100 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/38

FIN

RUS

BBS 1100

BBSE 1100

Instructions for use

Please read and save these

instructions.

Gebrauchsanleitung

Bitte lesen und aufbewahren.

Instruction d’utilisation

Prière de lire et de conserver.

Istruzioni d’uso

Si prega di leggere le istruzioni e

di conservarle.

Instrucciones de uso

Lea y conserve estas

instrucciones por favor.

Instruções de serviço

Por favor leia e conserve em seu

poder.

Gebruiksaanwijzing

Lees en let goed op deze

adviezen.

Brugsanvisning

Vær venlight at læse og

opbevare.

Bruksanvisning

Var god läs och tag tillvara dessa

instruktioner.

Käyttöohje

Lue ja säilytö

Kullanøm kølavuzu

Lütfen okuyun ve saklayin

Èíñòðóêöèÿ ïî

èñïîëüçîâàíèþ

Ïîæàëóéñòà, ïðî÷òèòå è

ñîõðàíèòå íàñòîÿùóþ

èíñòðóêöèþ

ENGLISH BBS 1100, BBSE 1100

You have high standards and expect to purchase quality goods – quality offered by

AEG.

We have built a durable and reliable electric power tool for you.

Please read the instructions for use before first operation so you can handle your

power tool effectively and safely.

We are sure that buying an AEG Electric Power Tool was the right choice!

BBS 1100 BBSE 1100

Nominal power 1100 W 1100 W. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Belt speed no load 400 m/min 230–400 m/min. . . . . . . . . . . . . . . . . . .

Sanding width 100 mm 100 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Belt length 560 mm 560 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Sanding surface 100 x 140 mm 100 x 140 mm. . . . . . . . . . . . . . . . .

Weight 5,0 kg 5,0 kg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

JPlease pay attention to the safety instructions in the attached leaflet!

JDust that arises when working in wood or using the tool on industrial material can be

dangerous to health. In this case connect the tool to a suction device.

JAppliances used at many different locations including open air must be connected

via a current surge preventing switch.

JAlways wear goggles when using the machine. It is recommended to wear gloves,

sturdy non slipping shoes and apron.

JSawdust and splinters must not be removed while the machine is running.

JDo not pierce the motor housing as this could damage the double insulation (use

adhesives).

JAlways disconnect the plug from the socket before carrying out any work on the

machine.

Only plug-in when machine is switched off.

JKeep mains lead clear from working range of the machine. Always lead the cable

away behind you.

JWhen sanding metal the dust suction facility should not be used, because of the risk

of fire from flying sparks.

Typically the A-weighted noise levels of the tool are:

Sound pressure level = 88 dB (A)

Sound power level = 101 dB (A).

Wear ear protectors! Measured values determined according to EN 50 144.

Typically the hand-arm vibration is below 2.5 m/s2.

Measured values determined according to EN 50 144.

Connect only to a single-phase AC current supply and only to the mains voltage

specified on the rating plate. Connection to sockets without earth protection is

possible as the appliance features protective insulation to DIN 57 740/ VDE 0740

and CEE 20. Radio suppression complies with the European standard EN 55014.

When fitting the plug, make sure that the brown (live) wire of this appliance is

connected to the plug terminal marked L or coloured red, and the blue (neutral) wire

of this appliance is connected to the plug terminal marked N or coloured black.

Under no circumstances must the wires of this appliance be connected to the earth

terminal of the plug marked either E, with the earth symbol or coloured green or

green/yellow.

The belt sander can be used for sanding wood, plastics and metal.

Do not use this product in another way as stated for normal use.

Introduction

Technical Data

Advice for your

safety

Measured sound

value

Measured

vibration value

Mains

connection

Use

ENGLISH BBS 1100, BBSE 1100

Always disconnect the plug from the

socket before carrying out any work on the

machine.

Prior the changing belt, adjust sanding belt

by turning the belt adjusting screw approx.

2–3 cm in the direction of the open side of

the machine beyond the rollers, whilst the

machine is running, as the new sanding

belt can sometimes brush against the

machine housing.

1. Pull the clamping lever forwards

2. Remove the worn belt and fit the inside of

the belt is pointing in the same direction as

the arrow on the machine.

3. Push the clamping lever back again

4. Taking a test run, position the sanding belt

with the aid of the belt adjusting screw so

that it is flush with the outer edge of the

sanding belt support.

The speed is adjusted by means of the

electronic thumb wheel.

1 = lowest speed

6 = highest speed

Brief description

Modifications: Text, diagrams and data are correct

at the time of printing. In the interest of continuous

improvement of our products, technical

specifications are subject to alteration without prior

notice.

Integrated dust removal

Locking button

On-/off switch

Suction connector

Adjusting screw for

belt

Dust bag

Electronic thumb wheel (only applicable for BBSE 1100)

Changing the

belt

Setting speed of

rotation

(only applicable

for

BBSE 1100

Produktspecifikationer

Varumärke:	AEG
Kategori:	Sander
Modell:	BBS1100
Färg på produkten:	Wit
Vikt:	410 g
Förpackningens bredd:	216 mm
Djuppackning:	121 mm
Förpackningshöjd:	118 mm
Snäll:	IP-beveiligingscamera
Husmaterial:	Metal, Plastic
Internationell säkerhetskod (IP):	IP67
Blåtand:	Nee
Minneskortets maximala kapacitet:	128 GB
Vormfaktor:	Rond
Placeringsstöd:	Binnen & buiten
Anslutningsteknik:	Bedraad
Ethernet LAN:	Ja
Monteringsmetod:	Plafond/muur
Maximal upplösning:	3840 x 2160 Pixels
Totalt antal megapixlar:	8 MP
Videokomprimeringsformat:	H.264, H.264+, H.265, H.265+, M-JPEG
Diameter:	70 mm
Typ av strömkälla:	DC, PoE
Strömutgång (volt):	12
Strömutgång (ampere):	0.5 A
Minimal belysning:	0 Lux
Synfältsvinkel (FOV).:	102 °
Antal kameror:	1
Integrerad minneskortläsare:	Ja
Kompatibla minneskort:	MicroSD (TransFlash), MicroSDHC, MicroSDXC
Nattseende:	Ja
LED-typ:	IR
Infraröd våglängd:	850 nm
Fast brännvidd:	2.8 mm
Video rörelsedetektering:	Ja
Antal Ethernet LAN (RJ-45)-portar:	1
Lösenordsskydd:	Ja
Strömförbrukning (max):	7 W
Full HD:	Ja
Optisk sensorstorlek:	1/2.5 "
Bildsensortyp:	CMOS
Kamerans slutartid:	1/3 - 1/100000 s
Gränssnitt:	RJ-45
Grafikupplösningar som stöds:	352 x 240,640 x 360,1280 x 720 (HD 720),1920 x 1080 (HD 1080),2560 x 1440,2560 x 1920,3840 x 2160
webbläsare:	Ja
Brusreducering:	Ja
Kabelteknik:	10/100Base-T(X)
Nätverksstandard:	IEEE 802.1x, IEEE 802.3af
Antal användare:	32 gebruiker(s)
Längd:	155.03 mm
Max 30 bilder per sekund:	30 fps
Nätverksprotokoll som stöds:	TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, UDP, Bonjour
Återställningsknapp:	Ja
IP-adressfilter:	Ja
Progressiv skanning:	Ja
Ethernet-gränssnittstyp:	Fast Ethernet
Quality of Service (QoS):	Ja
Typ av styrkareglering:	Auto
PTZ-kontroll:	Ja
Rotationsvinkel:	360 °
Panoreringsintervall:	0 - 360 °
Dag/nattläge:	Ja
Antal linser:	1
Maximalt antal bländare:	1.6
Antal sensorer:	1
Väderbeständig:	Ja
Night vision scope:	30 m
Infrarött (IR) termineringsfilter:	Ja
Bakgrundsljuskompensation:	Ja
Justering av bildkvalitet:	Brightness, Contrast, Saturation, Sharpness
Strömförbrukning (strömförsörjning via Ethernet (PoE)):	7.5 W
Wide Dynamic Range (WDR):	Ja
Bitrate:	32Kbps~16Mbps
Wifi:	Nee
Drifttemperatur (TT):	-30 - 60 °C
Relativ luftfuktighet i drift (VV):	0 - 95 procent
Tiltvinkelområde:	0 - 90 °
Mask privat zon:	Ja
Beteendeanalys:	Intrusion detection, Line crossing detection, Object removal detection, Unattended baggage detection
Spiegel:	Ja
Systemfunktioner intelligent videoövervakning (IVS):	Gezichtsherkenning
Linsens betraktningsvinkel, horisontell:	102 °
Brusreduceringsteknik:	3D-ruisonderdrukking
Betraktningsvinkellins, diagonal:	120 °
Anti flimmer:	Ja
Hjärtslag:	Ja
Digital vattenstämpel:	Ja
Linsens betraktningsvinkel, vertikal:	55 °
Aktivt larm för obehörig demontering:	Ja
Region of Interest Coding (ROI):	Ja
3D brusreducering:	Ja