After Later Audio Bleep Bloop 2k Bruksanvisning

After Later Audio Inte kategoriserad Bleep Bloop 2k

Läs gratis den bruksanvisning för After Later Audio Bleep Bloop 2k (1 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 19 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 10 recensioner. Har du en fråga om After Later Audio Bleep Bloop 2k eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/1

BLEEP BLOOP 2K

Description

Introduction

Bleep Bloop 2000, or BB2k is a collaboration between Tim Held of Podular

Modcast and After Later Audio. What started as a joke-module made by Tim’s

friend Jenny has now actualized into real-life. What is it? Why is it? These

are all questions we are still asking ourselves. All we know is we love it.

Overview

BB2k can be used as a four-voice oscillator or a quirky CV-source. It was

designed to inspire experimentation and creative patching. While it appears

simple at face-value, it is actually quite versatile. BB2k is able to get

into glitchy rhythm generation, haunting drones and outrageous control

voltage over any parameter the user wishes. Just power it on and start

exploring!

The module can be divided into 4 different sections: 4 Oscillators, Splarf 1

and 2 Switch, a Crossfader and a VCA.

Oscillators

There are 4 oscillators that all come out of the module’s only output. Each

is independently controllable via a pitch knob or via CV, and all 4 range

from LFO to audible frequencies. Depending on the module’s settings, the 4

oscillators are either a Sine, Triangle or Square wave. These oscillators DO

NOT track 1 v/o.

Splarf

The Splarf Switch selects between 2 banks of waveforms. In the Splarf 1

position all Oscillators will either be a Sine or Triangle wave, and in

Splarf 2 Oscillators A and B are Sine waves while C and D are Triangle, or

all 4 are Square waves (depending on the Crossfader position).

Crossfader

The crossfader blends the different waveforms of each Splarf section

together. If the module is set to Splarf 1 and the Crossfader is completely

counter-clockwise, then the output will be 4 Triangle waves, and when

completely clockwise 4 Sine waves. When the Splarf is set to 2 then

completely CCW will have an output of 4 Square waves and completely CW 2

Triangle and 2 Sine waves. There is also a CV input to control the crossfade.

VCA

The VCA accepts gates and envelopes to control the module's output.

Produktspecifikationer

Varumärke:	After Later Audio
Kategori:	Inte kategoriserad
Modell:	Bleep Bloop 2k
Enhetsplacering:	Ingebouwd
Typ av operation:	Draaiknop
Färg på produkten:	Roestvrijstaal
Inbyggd display:	Nee
Vikt:	8100 g
Bredd:	380 mm
Djup:	510 mm
Höjd:	- mm
Förpackningens vikt:	9800 g
Förpackningens bredd:	440 mm
Djuppackning:	570 mm
Förpackningshöjd:	130 mm
Typ av material (överst):	Roestvrijstaal
Brännare/kokzonseffekt 1:	5000 W
Antal brännare/kokzoner:	1 zone(s)
Typ av häll:	Gaskookplaat
Elektronisk tändning:	Ja
Brännare/kokzon typ 1:	Extra groot
Antal gasbrännare:	1 zone(s)
Antal elektroniska kokzoner:	0 zone(s)
Vanlig brännare/kokzonsdiameter:	130 mm
Normal brännare/kokzon:	5000 W
Kontrollposition:	Voorkant
Installationsfackets bredd:	358 mm
Installationsfack djup:	490 mm
Nuvarande:	16 A
Ansluten last (gas):	5000 W
Installationsutrymmets djup (min):	54 mm
Antal kokzoner som ska användas samtidigt:	1
Strömkälla brännare/kokzon 1:	Gas
Wokbrännare:	5000 W
Wokbrännares läge:	Midden
Placera brännare/kokzon 1:	Centraal
Diameter brännare/kokzon 1:	130 mm
Kokzon 1 form:	Rond