Aguilar OBP-2 Bruksanvisning

Läs gratis den bruksanvisning för Aguilar OBP-2 (5 sidor) i kategorin mottagare. Guiden har ansetts hjälpsam av 15 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 8 recensioner. Har du en fråga om Aguilar OBP-2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/5
To wire MN (1Z2Z) taper potentiometer, swap positions of the following wires: Bridge P.U. and Neck P.U.; Volume jumper and GND.
Value depends on pickups. Use values recommended by pickup manufacturer.
Inserting 1/4” plug applies power to OBP-2.
Pots shown rear view.
For single pickup, eliminate blend pot - wire pickup directly to volume pot.
GND
To wire MN (1Z2Z) taper potentiometer, swap positions of the following wires: Bridge P.U. and Neck P.U.; Volume jumper and GND.
Value depends on pickups. Use values recommended by pickup manufacturer.
Inserting 1/4” plug applies power to OBP-2.
Pots shown rear view.
For single pickup, eliminate blend pot - wire pickup directly to volume pot.
GND
GND
To wire MN (1Z2Z) taper potentiometer, swap positions of the following wires: Bridge P.U. and Neck P.U.; Volume jumper and GND.
Value depends on pickups. Use values recommended by pickup manufacturer.
Inserting 1/4” plug applies power to OBP-2.
Pots shown rear view.
For single pickup, eliminate blend pot - wire pickup directly to volume pot.

Produktspecifikationer

Varumärke: Aguilar
Kategori: mottagare
Modell: OBP-2

Behöver du hjälp?

Om du behöver hjälp med Aguilar OBP-2 ställ en fråga nedan och andra användare kommer att svara dig