AIM Sportline Multichron Bruksanvisning

Läs gratis den bruksanvisning för AIM Sportline Multichron (3 sidor) i kategorin Diverse. Guiden har ansetts hjälpsam av 43 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 4 recensioner. Har du en fråga om AIM Sportline Multichron eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Release 1.04

Aim s.r.l. Via Cavalcanti 8, 20063 Cernusco sul Naviglio – MI – ITALY

Tel (+39) – 02- 9290571 . Fax (+39) – 02 – 92118024 www.aim-sportline.com

1)Initial set up When you first use the Multichron, press the CONF-SPEED button to set the following options (press the plus or

minus buttons to vary the settings and then press the DATA-STOP button to move to the next line):

i)Contrast (to alter the display and viewing angle)

ii)Light on/off (for versions with backlight)

iii)Beep sound on/off

iv)Send (IRDA) PC transmission data (see PC data section)

v)Econ on/off (Power saver, when “on” the display closes down until a button is pressed.

Press the CONF-SPEED button to move to the next set up screen:

vi)Alarm on/off

vii)Set the time when the alarm will go off (use the DATA-STOP button to choose the hours and minutes to change. Change

the flashing digit by using the plus or minus button.

viii)Chime on/off (when “on” the multichron beeps every 30 minutes)

ix)Time of day: Use the same button logic as in vii) above to set the correct time of day. The default setting is 12 hour mode.

You can change this from A (am) to P (pm) or _ (24 hour mode)

Press the CONF-SPEED button to move to the next set up screen:

x)Distance measurement ( you can choose between Miles or Kilometers

Competitor 2,3 and 4

previous lap/current lap

times

Competitor 1 previous lap

time

Competitor 1 current lap

running time.

Lap number

Number in SPL

column shows the

number of split

times per lap. A b

in this column

denotes best time

Use – set + when configuring your required

settings

For competitor

1,2,3 and 4 timing

IR PC Data Transmission system

Produktspecifikationer