Airpura H600 Bruksanvisning


Läs gratis den bruksanvisning för Airpura H600 (2 sidor) i kategorin Luftrenare. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 7.5 recensioner. Har du en fråga om Airpura H600 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
OPER ATING
&
FILTER REPLACEMENT
DIRECTIONS
H600
To close the lter chamber
Replace
the gasket
Position the
indentation in the cover
into the center of the
HEPA lter
Replace
the 4 screws
and tighten
Turn the Airpura
back on casters
Insert the tube
into the lter
chamber inside
the Prelter
Let the spiral
open to ll
the opening
Open the top of the
spiral to make a
slight funnel
Insert the
Carbon canister into
the funnel and hold it
straight
Position the
Prelter inside
the lter
chamber
Place a felt gasket at
the bottom of the
lter chamber
Unfold the lter slider
(Supplied with replacement
lters or on request
Part#6F 001)
Roll it
into a spiral
Let the canister
slide down
thelter slider
Pull the lter slider up
out of the cavity using
both hands and let the
canister slide to the
bottom of the cavity
Remove the lter
slider and fold it
for further use
Slide in the
Hepa lter
To open the lter chamber
Turn over
the Airpura
Remove the 4
retaining screws
Take off
the cover
Remove
the gasket


Produktspecifikationer

Varumärke: Airpura
Kategori: Luftrenare
Modell: H600

Behöver du hjälp?

Om du behöver hjälp med Airpura H600 ställ en fråga nedan och andra användare kommer att svara dig