Akai APR-200 Bruksanvisning

Akai Radio APR-200

Läs gratis den bruksanvisning för Akai APR-200 (79 sidor) i kategorin Radio. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 4.2 stjärnor baserat på 7.5 recensioner. Har du en fråga om Akai APR-200 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/79
EN - ENGLISH
AM / FM / SW
Digital Portable Radio
MODEL: APR-200
User manual
EN - ENGLISH
AM / FM / SW
Digital Portable Radio
MODEL: APR-200
User manual
EN - ENGLISH
AM / FM / SW
Digital Portable Radio
MODEL: APR-200
User manual
EN - ENGLISH
1
1. ON/OFF / SLEEP
2. KEY LOCK
3. M+ ( MEMORY UP )
4. M- ( MEMORY DOWN )
5. EARPHONE JACK
6. LINE-IN JACK
7. VOL +
8. VOL -
9. TUNING DOWN
10. TUNING UP
11. SET / MEMORY (AUTO SCAN)
12. ALARM ON/OFF/SW METER
13. BAND / AUX-IN
14. STATION BUTTON M1/M2/M3
15. SNOOZE
POWER SOURCE
AC OPERATION
Insert AC cord connector into the AC jack on the unit. Insert the AC plug into the AC mains
outlet.
EN - ENGLISH
2
BATTERY OPERATION
1. Open the Battery Compartment.
2. Insert 4 pieces of ”D size batteries into the Battery Compartment. Make sure that the batteries
are installed with proper polarity to prevent possible damage to the unit:
Load new batteries with their polarities ( + and - ) aligned correctly.
Do not apply heat to batteries, or internal short-circuit may occur.
If this unit is not to be used for a long period of time, remove all batteries and store them in a cool
and dry place.
Remove exhausted batteries immediately and dispose of them.
Do not use old and new batteries together. Also never use an alkaline battery with a Manganese
battery.
Battery life
If the sound becomes low or distorted, replace all the batteries with new ones.
Or when the display is hardly visible, replace all the batteries with new ones.
NOTE : Batteries connection are cut off whenever AC connector is plugged into the jack
on the unit. If AC supply discontinues, please be reminded to unplug the AC cord
connector from the unit, otherwise, even if batteries are installed into the unit, the time
setting will lose soon.
RADIO OPERATION
1. To turn on the radio, press ON/OFF button ( 1 ). Frequency will be displayed on the LCD.
2. Select the waveband ( AM / FM / SW ) or AUX mode by pressing the BAND/AUX-IN button
( 13 ). The band / AUX indication will always be shown on the LCD
3. Adjust the antenna ( See ANTENNAS )
4. Tune manually, automatically, or by MEMORY to a desired radio station. The LCD will display
the frequency of the received station for 5 seconds, and then jump back to show the time. ( See
TUNING ). After a station is chosen, the radio frequency and the time will be shown
alternatively on the LCD for a period of 5 seconds.
5. Adjust the volume by pressing Vol+ ( 7 ) or Vol- ( 8 ), to the desired level.
Volume levels from 00 ( mute ) to 18 ( maximum ).
6. Press ON/OFF button ( 1 ) again to turn off the radio, then LCD will show time only.
Note : The current station (either AM, FM or SW ) and also the current volume level will be
memorized at the time when the radio is turned off. Once you turn on the radio again, the memorized
station will broadcast with the memorized volume level.

Produktspecifikationer

Varumärke: Akai
Kategori: Radio
Modell: APR-200

Behöver du hjälp?

Om du behöver hjälp med Akai APR-200 ställ en fråga nedan och andra användare kommer att svara dig