Alcatel Baby Link 700 Bruksanvisning

Läs gratis den bruksanvisning för Alcatel Baby Link 700 (2 sidor) i kategorin Babyvakt. Guiden har ansetts hjälpsam av 24 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 4 recensioner. Har du en fråga om Alcatel Baby Link 700 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Before use

You ay test the babbefore initial e, and at regular my monitor us

times thereafter.

To test your baby monitor:

1.Place the parent unit and the baby unit in the same room to test

the product.

2. Press and hold on the parent unit the screen displays Please

Wait...

3. Slide on the baby unit to turn it on.ON/OFF

4. If the parent unit displays an image from the baby unit. Your baby

monitor is now ready for use.

Note:

• Make sure the baby t s t uniialeas3 feet awat y fro the parenmt

unit.

• If both unitare noconnected t sys Ls t , theparenunidit plaNoink

for a fewonds sec.

T ihent diplas syPlease Wait... and ashes.fl

Install the battery

You can power up the parent unit by connecting it to AC power or

to the rechargee battery provided. Even if the parent unit is abl

coected to AC power, we recoend you ao instl the nnmmlsal

battery. This guarantees continual ope

ratn in ce of a power ioas

outage.

Instl the battery as shown below.al

1. With the l labe THDIS SIE UP fac , abs oingupinsert thesmall tf

the tohe ts baerintty tsloinside thebaer tty compartment. Make

sure the etlic contacicorrectly oriented as own below. malt s sh

P ush thebaeryttinbaertohe ttty compartment unillit it ccks

cy to seurelinplace.

2. Align the battercopartncover at againsthe battery mmet flt y

copartntthen slide imme, t tardthe center othe parenows f t unit

until it clickin place. s to

Replace the battery

To replace the battery, press down on the large tab of the battery

and pl it out of the battery copartnt, then follow the steps ulmme

above to instl the battery. al

Note:

• T theoperaing time foring us the c rehargeablebaeristty short. If

you t to t a we cwanmonior yourbaby forlong time, reommend y ou

connehect t o AC . parenunit t tpower

• If the parent t uniwill nobeedt us forlon a g time, diconneandsct

o vremove thebaertty tpreent poibleleakagess .

• Use onlthe battersupplied th this product.y y wi

Connect and charge the battery

Note:

• Useonlheparenuni y t t t poweradap ter andthe baby unipowert

adapter th tsuppliedwihiprodus ct.

• T heparenunit t poweradap ter and baby unipower adapter are t

to be cltinended torrecty orienedin a

verticaloroor flmount

sit poion. Theprongarenodesignedholdhes t to t pluginplace if it

i to a cts pluggedineilingunder-, he-ableorcabineout t tlet.

• Make sure the parent unit, the baby unit and the power adapter

cord are out of reach of children.

Connect the baby unit

Connect the parent unit

Charge the parent unit battery

Once you have installed the parent unit and its battery, press and

hold to turn it on. The battery icon indicates the battery status

(see the Parent unit display icons table).

The standby e vars deing on the sensitivity level you set, timieepnd

your actual use and the age of the battery.

When the parent unit is operating in battery mode and the battery is

low, you need to charge the parent unit without interruption for at

least 30 minutes to give the parent unit enough charge to use for a

short time. When operating in low battery condition, the parent unit

displays Battery low and . The parent unit plays short beeps to

alert you.

Note:

When you charge the battery initially or it is not used for a long

period of time, charge it for 12 hours continuously. It takes longer to

charge the battery when the parent unit is turned on. To shorten the

charging time, turn the parent unit off while charging.

Positioning the baby monitor

Place the parent unit within the operating range of the baby unit. We

recommend the parent unit is at least 3 feet away from the baby unit

to avoid audio feedback. If you still experience audio feedback,

move the parent unit and the baby unit farther apart.

Note:

For better image quality, do not place the baby unit too far away

from your baby.

Operating range

The operating range of the baby monitor is up to 250m outdoors or

50m indoors. The actual operating range may vary depending on

the environmental conditions and other interferences such as walls,

doors and other obstructions.

Overview

Baby unit overview

Parent unit overview

Parent unit lights

Parent unit dilay iconssp

Parent unit main menu icons

Parent unit display messages

Using the baby monitor

Adjusting speaker volume for parent unit

You can change the speakfroto , er volume m Volume 1 Volume 5

or turn it off.

When the speaker volue is set to off, appears briey and mfl

the light turns on.

To adjust the speaker volume:

1.Press when the parent unit is not in use.

2. Press , , or to adjust the speaker volue.m

Adjusting speaker volume for baby unit

You can change the speaker volume.

To adjust the speaker volume:

Press or on the baby unit at any tie.m

Adjusting display

LCDbrightness

You can change the brightness of the parent unit screen from

Level 1

to Level 5.

To set the brightness of the parent unit screen:

1. Press MENU/OK when the parent unit is not in use.

2. Press or to choose , then press to select. DISPLAY

3. Press or to choose Brightness.

4. Press or to choose the desired level of brightness, then

press MENU/OK confirm your selection.

LCD contrast

You can change the contrast of the parent unit screen from Level 1

to Level 5.

To set the contrast of the parent unit screen:

1. Press when the parent unit isnot in use.

2. Press or to choose , then press to select.DISPLAY

3. Press or to choose Contrast.

4. Press or to choose the desired level of contrast, then press

to confirm you selection.

BABY LINK 700

Sound activation

- You can set the screen to be turned on

automatically whenever there are sounds

detected from the baby units when the parent unit

screen is turned off anually.m

Pair/unpair

- The baby units and parent unit provided are

already paired. You can add or replace baby units

(purchased separately) to your baby monitor

system.

Monitoring odem

You can choose to onitor in Single Baby unit, Split m

Baby unit or Patrol Mode if there are ore than one m

baby units in your syste.m

Language

You can select a language to be used in all screen

displays.

Display

- You can change the brightness of the parent unit

screen.

- oucanhangehet e parent uniY c t contrasohf tt

screen.

Alert tone

- You can set whether the parent unit beeps

whenever the parent unit operates in low battery

condition.

- You can set whether the parent unit beeps

whenever the link between the parent unit and the

baby unit is lost.

- You ay turn on the sound alert so that the m

parent unit beeps as soon as the baby unit

detects sounds which light up four sound level

indicators on the parent unit when the parent unit

volue is turned off anually.mm

Teperaturem

- You can set the desired minimum room

temperature of the baby unit.

- aiYou can set the desired mxmum room

temperature of the baby unit.

- You can set whether the parent unit beeps

whenever the is out of the preset temperature

temperature range.

- You can set the scale of the baby temperature

unit.

Sensitivity

- You can use the parent unit to change the sound

sensitivity level of the baby units.

Battery low

Failed to connect

No Link

Pairing failed

Confirm to unpair?

Pairing completed

Unpairing

completed

When the parent unit is powered by

the rechargeable battery and the

battery level is low, it needs to be

recharged.

The parent unit fails to switch to the

net baby unit in Single Baby unit or x

Patrol Mode.

The selected baby unit slot is not

linked to the parent unit.

The selected baby unit cannot be

paired with the parent unit.

You try to unpair the baby unit(s). The

operation needs your conration.fim

The selected baby unit has been

paired with the parent unit.

The selected baby unit(s) has been

unpaired with the parent unit.

Please Wait...

Temperature

too low

Temperature

too high

The link between the parent unit and

the selected baby unit is lost, or the

selected baby unit is out of range, or

the selected baby unit slot is epty.m

When you have only one paired baby

unit and the link is lost, or you have

multiple paired baby units and the

links are lost.

The temperature detected from the

selected baby unit is below the set

minimum temperature.

The temperature detected from the

selected baby unit is above the set

maximumtemperature.

270˚ rotatable camera head

Antenna

Temperature

sensor

ON/OFF

Camera

Light sensor

Microphone

(Volume up)

(Volume down)

ON/OFF LED

light

On when strong signal strength is detected between

the parent unit and the selected baby unit.

Flashes when the parent unit cannot link to the

selected baby unit.

Off when the parent unit is turned off.

On when theparenunibaery t t tt is .being charged

Flashes when the parent unit battery is low and needs

charging.

Off when the parent unit battery is fully charged, or

when no battery is installed.

On when the parent unit is talking to the baby unit.

On wn the speaker volue of the parent unit is hem

turned off.

Connection status

- displays when strong signal strength is

detected between the baby unit and the parent

unit.

- or dte signal strength isplays when modera

is detected between the baby unit and the

parent unit.

- displays when the link between the baby unit

and the parent unit is lost.

Current view status

- Displays the nuber of the baby unit that is m

being viewed when in Single Baby unit.

- Displays the highlighted baby unit when in

Patrol Mode, if there are more than one baby

units in your system.

or or

or

25

o

C

or

or

Zoom

- Displays when the c at the baby unit has amera

zoomed in.

Tture alertempera

- Displays when the tture alert is set to on.empera

Real-t ttureimeempera

- Displays the real-t tture of the imeempera

selected baby unit.

Sound level indicators

-

Displays the sound level according to the scales

of loudness when there is sound ttted ransmi

from the baby unit.

Speaker veolum

- Displays the speaker of the parent unit volume

is turned off.

Speaker veolum

- Diskplayhes t speaer volumelel whileadjustingve .

Battery status

-

animates when the battery is charging.

- displays solid when the battery is fully

charged.

- displays when the battery is low and needs

charging.

- displays when no battery is installed but

operates using AC power, or the battery has

been installed incorrectly.

ATLINKS, 22 quai Gallieni 92150 Suresnes – France

The Alcatel logo and Alcatel name are trademarks of Alcatel Lucent

and used under license by ATLINKS.

USER'S GUIDE

PLEASE READ THIS USER'S GUIDE BEFORE USING YOUR BABY MONITOR

Connect the AC adapter

to an electrical outlet

230V/50 Hz

The bar keeps

scrolling until charging

is completed

Connect the AC adapter

to an electrical outlet

230V/50 Hz

PAIR

Threaded socket

Antenna

Microphone

(Left)

(Up)

(On/off)

(Right)

(Down)

Speaker

VOL

(Volume)

(Zoom) / BACK

(View)

ME/SELECTNU

TALK

Produktspecifikationer