Allen-Heath DT168 Bruksanvisning


Läs gratis den bruksanvisning för Allen-Heath DT168 (4 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 35 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 18 recensioner. Har du en fråga om Allen-Heath DT168 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/4
DT 8 Getting Started Guide 16
AP11788 Issue 3
DT168
Getting Started Guide
The DT 8 is a portable, rugged Dante I/O unit. It can be used to complement 16
controlled mic/line preamps and 8 XLR line outputs. It connects to the Dante
network over a single Cat5e cable, or two cables for redundancy .
The DT 8 can be operated horizontally with the connectors facing upward or 16
sideward, or vertically to save space on stage. It can also be mounted in a 19”
rack or flight case using the optional kit. A hard-wearing padded AB1608-RK19
polyester carry case is also available, A&H part number . AP9932
Software and firmware
Visit the Audinate website to learn more about Dante, and download Dante
Controller to route audio and configure devices on a Dante network:
https://www.audinate.com/
Preamp control of the DT168 by an SQ mixer requires SQ
firmware V1.4 or higher and SQ Dante card firmware V1.0.5+.
Preamp control of the DT168 by a dLive mixer requires dLive
firmware V1.8 or higher and a dLive M- -Dante 64x64 or 128x128 DL
card. Use of the iLive/GLD M-Dante card is not supported.
Check for the latest DT168 firmware and www.allen-heath.com
instructions on how to update it.
Front panel


Produktspecifikationer

Varumärke: Allen-Heath
Kategori: ej kategoriserat
Modell: DT168

Behöver du hjälp?

Om du behöver hjälp med Allen-Heath DT168 ställ en fråga nedan och andra användare kommer att svara dig