Alogic UL2QC10CA Bruksanvisning


Läs gratis den bruksanvisning för Alogic UL2QC10CA (2 sidor) i kategorin Batteriladdare. Guiden har ansetts hjälpsam av 18 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 9.5 recensioner. Har du en fråga om Alogic UL2QC10CA eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
Operation Instructions
To commence charging, plug the included power adapter to a power wall socket and
proceed to connect the other end to the Power Hub, located on the back. Two white LED
lights will appear to indicate that the device is on.
For Wireless Charging:
For Wired Charging:
1. LED lights will turn solid white to indicate that the device is in standby mode and is ready
to be used
Power Hub. Make sure that the centre of your device is aligned with one of the Qi logos
on top of the charger.
3. The LED lights will appear to breath slowly to indicate that a successful connection has
been established and wireless charging has commenced.
4. In the event that a foreign object is detected (FOD) or if your device is emitting high
temperatures the LED indicator will flash red.
1. To charge a device via the USB-A port, connect the USB-A end of your existing compat-
ible cable to the Power Hub’s USB-A port and the other end to your device, charging
should commence immediately.
2. To charge a device via the USB-C port, connect the USB-C end of your existing compat-
ible cable to the Power Hub’s USB-C port and the other end to your device, charging
should commence immediately.


Produktspecifikationer

Varumärke: Alogic
Kategori: Batteriladdare
Modell: UL2QC10CA

Behöver du hjälp?

Om du behöver hjälp med Alogic UL2QC10CA ställ en fråga nedan och andra användare kommer att svara dig