Alpina SF-9345 Bruksanvisning
Läs gratis den bruksanvisning för Alpina SF-9345 (25 sidor) i kategorin Värmare. Guiden har ansetts hjälpsam av 5 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 3 recensioner. Har du en fråga om Alpina SF-9345 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/25

1
SF- 9345
EN
SF-9340 Portable Kerosene Heater
Instruction for use
AR
SF-9340
EN:
For your own safety read these instrucons carefully before using the appliances.
AR:

2
ENGLISH
IMPORTANT SAFEGUARDS
Before using your heater, basic safety precauons should be followed:
1. Never use any fuel other than water-clear 1-K kerosene.
2. Never use fuel such as gasoline,benzene,paint thinners or other oil compounds in this heater.
3. Never use rell heater fuel tank when heater is operang or sll hot.
4. Never use heater in areas where ammable vapors or gases may be present.
5. Never ll heater fuel tank in living space; ll tank in outdoors.
6. Never store or transfer kerosene other than metal or plasc container that is acceptable for kerosene,
Non-red in color, and clearly marked ‘Kerosene’. Do not store kerosene in living space; It should be stored in a
Well venllated place outside the living area.
7. The unit is Extremely hot while in operaon due to hight surface temperature, Keep children, clothing,furniture,
and other combusble objects at least 36” away from top and front area.
8. Never leave heater operang if you intend to leave for any period of me. Always make sure to turn heater o and
inspect to insure that is completely exnguished prior to going to bed.
9. Never use as a source of heat for drying objects.
10. Never place objects on the top plate.
11. Never use heater to heat or boil water or use as a cooking appliance.
12. Never leave heater unaended while burning.
WARNING: FAILURE TO INSTALL,MAINTAIN, AND/OR OPERATE THIS KEROSENE HEATER ACCORDING TO
MANUFACTURER’S INSTRUCTIONS MAY RESULT IN CONDITIONS WHICH CAN INJURE BODY AND/OR PROPERTY DAMAGE.
RISK OF BURNS: DO NOT OPERATE THE HEATER WITHOUT THE GUARD OR GRILLE COMPLETELY ATTACHED.
IF POOR QUALITY KERSONE is used a rapid accumulation of carbon and tar is likely. This may cause a strong odor and will
destroy the wick. Addional heater damage may occur as the wick becomes more dicult to adjust. The use of poor
qulaity fuel could also make the wick very hard to exnguish. Always make sure the re is out.
ADJUSTMENT OF ROOM TEMPERATURE cannot be changed by adjusng the heater. A kerosene heater is either on or o.
There is no temperature adjustment if heater output is reduced by lowering the wick in any way,improper combuson
will occur producing odors and an accumulaon of tar and carbon. If your room becomes too hot, open a door or a
window or turn o the heater.
NOTE: The WARNING and IMPORTANT instrucons appearing in this manual are not meant to cover all possible
condions and situaons that may occur. It must be understood that commonsense, cauon, and carefulness are factors
which cannot be built into this heater. These factors must be supplied by the person(s) installing, maintaining, or
operang the kerosene heater.
Always contact your dealer,distributor, service agent, or the manufacturer on any problems or condions you do not
understand.
PARTS OF DESCRIPTION
1. Top plate
2. Carrying handle
3. Guard grille
4. Fuel gauge
5. Ignion lever
6. Burner
7. Wick adjuster knob
8. Fuel cap
9. Baery case (Back side)
10. Drip tray
11. Manual shut-off knob

3
ENGLISH
UNPACKING AND ASSEMBLY
1. Remove the heater and all packing materials from
the box.
Note: Save the shipping carton and packing
materials for future storage
2. Remove the protecve packing materials from the
burner.
3. Keep all packing materials in the carton box.
4. Posion the burner
Posion the burner on the wick adjuster.
To conrm proper placement of the
burner, grab the burner knob and rotate
the burner back and forth three or four
mes unl burner sets properly on the
wick adjuster.
5. Installing carrying handle
Insert the carrying handle into the holes
on the bracket of guard grille by aligning
holes on top plate.
6. Installing drip tray
Place the heater on the drip tray with four
legs (4) of the heater located next to four
tabs (4) on the drip tray.
Turn the heater clockwise unl the feet
slide into their tabs and stop
7. Installing baeries
Baery holder is located on the back of
the heater.
Open the baery cover from the baery
case.
Insert two (2) “C” cell baeries according
to the plus (+) and minus (-) markings
inside of the holder.
Replace the battery cover to the heater.
Produktspecifikationer
Varumärke: | Alpina |
Kategori: | Värmare |
Modell: | SF-9345 |
Färg på produkten: | Blue, White |
Vikt: | 2600 g |
Vakuum: | 800 mbar |
Mått (B x D x H): | 390 x 140 x 100 mm |
AC-ingångsspänning: | 230 V |
AC-ingångsfrekvens: | 50 Hz |
Behöver du hjälp?
Om du behöver hjälp med Alpina SF-9345 ställ en fråga nedan och andra användare kommer att svara dig
Värmare Alpina Manualer
30 December 2025
4 September 2024
4 September 2024
2 September 2024
2 September 2024
2 September 2024
2 September 2024
1 September 2024
1 September 2024
1 September 2024
Värmare Manualer
- Jocel
- Thomson
- Orbegozo
- Stiebel Eltron
- Thermotec
- MPM
- Duronic
- Heller
- Heinner
- Conceptronic
- Crane
- Elro
- Scandia
- Anslut
- Royal Sovereign
Nyaste Värmare Manualer
5 April 2025
4 April 2025
3 April 2025
2 April 2025
30 Mars 2025
30 Mars 2025
29 Mars 2025
29 Mars 2025
27 Mars 2025
27 Mars 2025