Altec Lansing MZX300 Bruksanvisning
Altec Lansing
hörlur
MZX300
Läs gratis den bruksanvisning för Altec Lansing MZX300 (2 sidor) i kategorin hörlur. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 6.5 recensioner. Har du en fråga om Altec Lansing MZX300 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
USB Cable
Audio Cable
3 Seconds
5 Seconds
Altec Over ear BT
MZW300 Headhones
3. When charging, a red LED light will illuminate. The light will turn blue Charging:
when your unit is fully charged. Your headphones can take up to two
hours to fully charge.
2. For a look at the various buttons and parts of your headphones,
view the graphic below.
5. Pairing Your Headphones With a Bluetooth Phone
-Press and hold the Power button for around five seconds. When your
speaker is ready to pair with a Bluetooth audio source, it will go into
pairing mode, with red and blue LED lights flashing alternately.
-Go to the Bluetooth Manager of your Bluetooth device. Search
Bluetooth devices and select “Altec Over ear BT” to start connecting.
-If required, enter the PIN code "0000” and confirm the entry. Once
paired, you will hear your speaker audibly say: “You are now paired,
enjoy.”
4. Power ON/Power OFF Your Headphones:
-Press and hold the Power button for approximately three seconds to power
on your headphones. Your headphones will automatically connect with the
last phone they were paired with.
-Once powered on, you can press and hold the
Power button again for approximately five
LED Indicator light will briefly turn red before
NOTE: In order to save power, your
headphones will automatically
over two minutes.
1. Make sure the following items are
included in your package.
Power/Play/Answer
Volume Up/NEXT
Volume Down/Previous
Indicator
Microphone
Charging Port
Auxiliary Port
6. Listening to Music
Play/Pause
Press the Play/Pause button to get music from your audio source to play or pause.
Next/Previous Song
Press and hold the Next/Previous buttons for
two seconds to advance to the next song or
go back to the previous one.
Increase/Decrease Volume
Press the Volume Up or Volume
Down buttons to increase or decrease the
volume.
NOTE: Music will automatically pause when
a call is dialed out or when there is
an incoming call. It will resume when
the call ends.
7. Using Your Headphones During Phone Calls Important Note
Last Number Redialing
Quickly tap on the Answer button twice and the last
You can also use the included 3.5mm Audio Cable to connect audio devices
through the Auxilliary Port on your headphones.
Note that when using the Audio cable instead of the standard wireless Bluetooth
connection, the Volume Up, Volume Down and Play/Pause buttons do not function.
Please use your audio source to control these functions.
number that you dialed will be redialed.
Answering an Incoming Call
To answer an incoming call, quickly press the
Answer button.
Ending a Call
To end a call, quickly press the Answer
button, and the call will be disconnected.
Adjusting Volume
By pressing the Volume Up or Volume
Down buttons you can increase or
decrease the volume of the phone call.
tem # MZW300
Quick tart uid S G e
HEADPHONES
BLUETOOTH
Produktspecifikationer
| Varumärke: | Altec Lansing |
| Kategori: | hörlur |
| Modell: | MZX300 |
Behöver du hjälp?
Om du behöver hjälp med Altec Lansing MZX300 ställ en fråga nedan och andra användare kommer att svara dig
hörlur Altec Lansing Manualer
26 September 2025
23 Juli 2025
23 Juli 2025
23 Juli 2025
23 Juli 2025
23 Juli 2025
23 Juli 2025
22 Juli 2025
22 Juli 2025
hörlur Manualer
- NAD
- Memphis Audio
- Nacon
- JVC
- Champion
- Avantree
- Teac
- Majority
- 4smarts
- Snakebyte
- Yamaha
- Hama
- Denon
- Mars Gaming
- Reloop
Nyaste hörlur Manualer
23 Oktober 2025
18 Oktober 2025
18 Oktober 2025
18 Oktober 2025
15 Oktober 2025
15 Oktober 2025
15 Oktober 2025
15 Oktober 2025
15 Oktober 2025
15 Oktober 2025