American International TOYK989 Bruksanvisning


Läs gratis den bruksanvisning för American International TOYK989 (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 25 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 13 recensioner. Har du en fråga om American International TOYK989 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
Double DIN Mount Applications
NOTE: Remove shaded pocket support Tabs on left and right bracket.
1. Remove the shaded tab from the bottom of each left and right mounting bracket (See figure C below).
2. Cut and remove center rib from main frame and file edges smooth.
3. Attach the left and right side brackets to the main frame (See figure C below).
4. Follow steps 4-6 from single ISO instructions on page 3.
5. Attach a rear support bracket to the rear of the radio components and adjust as needed
to allow rear support in the sub-dash (optional).
CUSTOMER HELP LINE
8am-4:30 P.S.T. Monday-Friday Except Holidays
USA 800-323-4329 • Canada 800-245-8777
Toyota
2008-12 HIGHLANDER (WITHOUT FACTORY NAVIGATION)
VEHICLE APPLICATIONS
KIT ASSEMBLY INSTRUCTIONS
NOTE: #1 - ISO trim ring (DITR989) must be used in place of after-market radio’s trim rings. For ISO mount
applications, mount after-market radio components to side brackets using screws provided with
radio when possible or hardware included with kit.
For ISO mount only: Attach (1) ISO Spacer to the
inside of lower sections on both Left
& Right mounting brackets as shown in Fig. A.
Cut
Cut
Left
Right
Fig. A
DITR989
IMB989L
IMB989R
Fig. C
Main Frame
TOYK989 Mounting Kit
iTOYK989 ©2017 AMERICAN INTERNATIONAL INDUSTRIES, INC. TECH Ver. 06/17 PRINT Ver. 06/17
Remove shaded pocket
support Tabs on left
and right bracket.


Produktspecifikationer

Varumärke: American International
Kategori: Inte kategoriserad
Modell: TOYK989

Behöver du hjälp?

Om du behöver hjälp med American International TOYK989 ställ en fråga nedan och andra användare kommer att svara dig