American International TOYK996 Bruksanvisning
Läs gratis den bruksanvisning för American International TOYK996 (5 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 15 personer och har ett genomsnittsbetyg på 3.5 stjärnor baserat på 8 recensioner. Har du en fråga om American International TOYK996 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/5
0.10 .1 0 .10.1
TOYK996 Mounting Kit
Scion
2012 IQ
2013 FR-S
VEHICLE APPLICATIONS
©2013 AMERICAN INTERNATIONAL INDUSTRIES, INC. TECH Ver. 3/13 PRINT Ver. 5/12
2
DIN MOUNT INSTRUCTIONS
1. Attach ISO mount brackets to rear of kit as shown in illustration B and attach to rear of
pocket using small screws provided with kit.
2. Insert DIN sleeve from your new radio into the upper section of the installation kit
(See Fig A below).
3. Depress the tabs from inside the sleeves opening upward, outward, and downward
to secure sleeve to the installation kit.
4. Install radio into sleeve and lock into place.
5. SUGGESTED…Support rear of radio with back strap.
ITP 975
Fig A
ISO MOUNT INSTALLATION INSTRUCTIONS
Not e: Some radio faces are larger in size than the ITP-975 Trim Ring allows.
You may need to file the opening larger for some radios.
1. Attach ISO mount brackets to rear of kit as shown illustration B and attach to rear of
pocket using small screws provided with kit,and insert spacers into both brackets.
2. Insert ISO mountable radio between ISO mount brackets and loosely attach to sides
of radio using screws provided with radio when possible or large wafer head screws
supplied with kit. (Be sure the length of the screws DO NOT touch any electrical parts
inside radio, some screws may need to be shortened.)
3. Attach ISO trim ring to face of kit.
4. Slide radio forward or backward
for desired look and tighten screws.
0.10.10.10.1
3
1. Carefully unclip and remove the panel with ac vents from around the hazard button.
Unplug hazard button.
2. Carefully unclip and pry forward the radio trim housing. Do not unplug Airbag light.
3. Place the housing on the dash(you can use something to protect the dash)
while installing new radio.
5. Remove the (4) 10mm bolts securing the radio to the sub-dash.
6. Pull radio forward, disconnect the attached wire harness and antenna lead
and remove radio.
DASH DISASSEMBLY
2012 SCION IQ
1. Carefully unclip and remove the panel surrounding the radio.
2. Remove the (4) 10mm bolts securing the radio to the sub-dash.
3. Pull radio forward, disconnect the attached wire harness and antenna lead
and remove radio.
DASH DISASSEMBLY
2013 FR-S
KIT ASSEMBLY
FOR ISO or DIN MOUNT APPLICATIONS.
2013 FR-S
2012 IQ
0.0.0.
Remove shaded left
and right brackets.
Remove shaded left
and right brackets.
Produktspecifikationer
| Varumärke: | American International |
| Kategori: | Inte kategoriserad |
| Modell: | TOYK996 |
Behöver du hjälp?
Om du behöver hjälp med American International TOYK996 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad American International Manualer
22 September 2024
22 September 2024
21 September 2024
12 September 2024
12 September 2024
12 September 2024
12 September 2024
12 September 2024
12 September 2024
12 September 2024
Inte kategoriserad Manualer
- CaviLock
- Atlas
- Bimar
- Osprey
- After Later Audio
- Rocstor
- Lindemann
- Glorious
- Bixolon
- Navionics
- Audac
- MIYO
- Premier
- Roller Grill
- Sony
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025