AMX CBL-DP-FL2 Bruksanvisning
AMX
ej kategoriserat
CBL-DP-FL2
Läs nedan 📖 manual på svenska för AMX CBL-DP-FL2 (2 sidor) i kategorin ej kategoriserat. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 1.5 användare
Sida 1/2
QUICK START GUIDE
CBL-x-FL2-16 Flat Cables
Overview
Flat cables benefits include weight reduction, space efficiency, flexibility and strength.
AMX flat cables feature MyTurn Ready Over-mold connector ends. With the addition of a
MyTurn™ Source Selection Button (FG554-21) that clips into the specially designed
groove built into the connector housing, participants can switch their content to the
display at the press of a button without moving from their seat.
The MyTurn Source Selection Button communicates with a MyTurn Source Selector
Receiver (FG554-23) which connects to a Solecis digital switcher, AMX master
controller (with I/O), or DVX all-in-one presentation switcher. Any MyTurn-Ready cable
may be equipped with the MyTurn solution.
HDMI 4K60 MyTurn-Ready Flat Cable
The HDMI directional cables (CBL-HDMI-FL2-xx) are available in 16 and 32 ft lengths.
The end labeled Display connects to the display device (example: HDTV monitor) and
has a built-in lock-down screw. The source end of the cable is not labeled (FIG. 1): .
HDMI Directional Cable Notes
• Avoid using an extension cable on either end of the HDMI cables without using
AMX Powered HDMI 2.0 Cable Extender (FG558-21).
• Connecting the cable backwards, with the connector labeled "DISPLAY" into the
video source, will not damage the equipment. However when incorrectly installed,
the cable will not transmit a signal.
Cat6 Ethernet Flat Cable
The MyTurn-Ready Cat6 Ethernet cable (CBL-ETH-FL2-16) with integrated strain relief
(not MyTurn Ready) is 16 ft with a flat cable design
. Cat6 features more stringent
specifications for crosstalk and system noise, plus performance of up to 250 MHz
(suitable for 10/100/1000Base-T/TX and 10GBase-T).
DisplayPort 4K60 MyTurn-Ready Flat Cable
The DisplayPort to DisplayPort (DP-DP)
cable (
CBL-DP-FL2-16
) is
directional
and includes
an additional DP-HDMI adapter
.
The connector labeled Display must be connected to the
display device (example: HDTV monitor). The source end of the cable is not labeled
(FIG. 3)
: .
Mini DisplayPort 4K60 MyTurn-Ready Flat Cable
The Mini DisplayPort to DisplayPort
(mDP-DP) cable (
CBL-MDP-FL2-16
) is
directional
and
includes an additional DP-HDMI adapter
.
The DP connector labeled Display must be
connected to the display device (example: HDTV monitor). The mDP source end of the
cable is not labeled
(FIG. 4)
:
DP Directional Cable Notes
• Connecting the cable backwards, with the connector labeled "DISPLAY" into the
video source, will not damage the equipment. However when incorrectly installed,
the cable will not transmit a signal.
HDMI Adapter
The DP-DP and mDP-DP cables come with an additional DP-HDMI adapter
(FIG. 5)
. It
connects to the Display end of these cables to interface with HDMI ports on some displays or
the AMX HDMI Extender (
FG558-21
).
FIG. 1 HDMI DIRECTIONAL FLAT CABLE
CBL-HDMI-FL2-16/32 CABLE SPECIF ICATIONS
FG#: • FG10-2192-16 - 16ft (5m)
• FG10-2192-32 - 32ft (10M)
Cable Length • 16.4 ft or 32 ft (5m or 9.75m)
Connectors: • SOURCE: HDMI (male) - connects to the source device.
• DISPLAY: HDMI (male) - connects to the display device.
• Molded Strain Relief • MyTurn ready Over-Mold
Data Rate: • 18 Gbps
Signal Support: • 4K@60Hz
Color: • 48 Bits (16 bits per color)
Supported Features: • Deep Color, 3D, HEC, ARC
Plating: • 24K Gold
CBL-ETH-FL2-16 CABLE SPECIF ICATIONS
FG#: • FG10-2194-16
Cable Length • 16.4 ft (5m)
Connectors: • RJ45 (male, both ends)
• Molded Strain Relief
Category: • Cat6
Data Rate: • 1000Base-T (Gigabit Ethernet)
Wiring: • 26 AWG
• 4 twisted pairs
• Single-core
Plating: • 24K Gold
FIG. 2 CAT6 ETHERNET FLAT CABLE
Display End
Source End
MyTurn-Ready Over-mold
RJ45
RJ45
Matte Black Cat6 Ethernet Flat Cable
FIG. 3 DP-DP DIRECTIONAL FLAT CABLE
CBL-DP-FL2-16 CABLE SPECIF ICATIONS
FG#: • FG10-2193-16 - 4K60 MyTurn Ready Flat Cable
Cable Length • 16.4 ft (5m)
Connectors: • SOURCE: DisplayPort (male) - connects to the source device
• DISPLAY: DisplayPort (male) - connects to the display device
• Molded Strain Relief
• MyTurn ready Over-Mold
Data Rate: • 18 Gbps
Signal Support: • 4K@60Hz
Color: • 48 Bits (16 bits per color)
Supported Features: • Deep Color, 3D
Plating: • 24K Gold
Included: • DP-HDMI adapter
FIG. 4 MINI DP-DP DIRECTIONAL FLAT CABLE
CBL-MDP-FL2-16 CABLE SPECIF ICATIONS
FG#: • FG10-2196-16 - 4K60 MyTurn Ready Flat Cable
Cable Length • 16.4 ft (5m)
Connectors: • SOURCE: mDP (male) - connects to the source device
• DISPLAY: DP (male) - connects to the display device
• Molded Strain Relief
• MyTurn ready Over-Mold
Data Rate: • 18 Gbps
Signal Support: • 4K@60Hz
Color: • 48 Bits (16 bits per color)
Supported Features: • Deep Color, 3D
Plating: • 24K Gold
Included: • DP-HDMI adapter
FIG. 5 DP-HDMI ADAPTER
MyTurn-Ready Over-mold
Release button
Source End
MyTurn-Ready Over-mold
Source End
Release button
© 2016 Harman. All rights reserved. Modero, AMX, AV FOR AN IT WORLD, HARMAN, and their respective logos are registered trademarks of
HARMAN. Oracle, Java and any other company or brand name referenced may be trademarks/registered trademarks of their respective companies.
AMX does not assume responsibility for errors or omissions. AMX also reserves the right to alter specifications without prior notice at any time.
The AMX Warranty and Return Policy and related documents can be viewed/downloaded at www.amx.com.
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 AMX.com | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | fax 469.624.7153
AMX (UK) LTD, AMX by HARMAN - Unit C, Auster Road, Clifton Moor, York, YO30 4GD United Kingdom • +44 1904-343-100 • www.amx.com/eu/
93-2 92-01 EV: A1 R
Last evised: / /2016 R 3 30
RGB with Stereo MyTurn-Ready Flat Cable
The RGB with Stereo MyTurn-Ready Flat Cable (CBL-RGB+A-FL2) is 16 ft with a flat
design that can be hidden under the carpet. A separate (included) male-male audio
patch cable introduces audio signals from a Source 3.5mm Audio Out jack to be carried
to the Display end through the same RGB cable. The Display end pigtail plugs into the
Display Audio Input 3.5mm jack.
Use the separate 3.5mm Stereo Audio Patch Cable (included) to connect to the audio
output on the Source Device.
USB 3.0 MyTurn-Ready Flat Cable
USB 3.0 MyTurn-Ready Flat Cable (CBL-USB-FL2-16) adds the new transfer mode
SuperSpeed (SS) that can transfer data at up to 5 Gbit/s (625 MB/s), which is about ten
times faster than the USB 2.0 standard. It also supports 900 mA of charging current to
power USB devices. The cable is also backwards compatibility with USB 1.0/2.0
devices.
Additional Documentation
Refer to the Products > Architectural Connectivity catalog page on www.amx.com
(Dealer Site) for additional product documentation.
CBL-RGB+A-FL2-16 CABLE SPECIF ICATIONS
FG#: • FG10-2195-16 - MyTurn Ready Flat Cable
Cable Length • 16.4 ft (5m)
Connectors: SOURCE: 15-pin HD VGA (male), with two 3.5mm female ports:
• One port connects to the source device via the separate
(included) Stereo Audio Patch Cable.
• One port is inactive - use this port to store the Stereo Audio
Patch Cable when not in use. See FIG. 6 for details.
• MyTurn ready Over-Mold
DISPLAY: 15-pin HD VGA (male), with a 3.5mm Stereo pigtail
(male) - connects to the display device:
• The pigtail is 12” (30.5cm) long.
• Molded Strain Relief with lock-down screws
Included: • 3.5mm Stereo Audio Patch Cable (18” / 45.7cm)
FIG. 6 RGB + AUDIO FLAT CABLE
3.5mm stereo audio
pigtail (12”) connects
to the display device
audio input
This end connects
to Source VGA “Out”
This end connects
to display VGA “In”
Storage Port - use when
storing the Stereo Audio
Patch Cable when not in
Audio Port - active audio
port connects to source
device audio out via included
3.5mm Stereo Audio Patch Cable
use.
CBL-USB-FL2-16 CABLE SPECIF ICATIONS
FG#: • FG10-2197-16
Cable Length • 16.4 ft (5m)
Connectors: • USB Type A on both ends
• Molded Strain Relief
• MyTurn ready Over-Mold
Data Rate: • 5 Gbps
Charge Current: • 900 mA
Plating: • 24K Gold
FIG. 7 USB 3.0 FLAT CABLE
USB Type A Display End
USB Type A Source End with MyTurn-Ready Over-mold
Produktspecifikationer
| Varumärke: | AMX |
| Kategori: | ej kategoriserat |
| Modell: | CBL-DP-FL2 |
Behöver du hjälp?
Om du behöver hjälp med AMX CBL-DP-FL2 ställ en fråga nedan och andra användare kommer att svara dig
ej kategoriserat AMX Manualer
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
ej kategoriserat Manualer
- ej kategoriserat Graphite
- ej kategoriserat Haier
- ej kategoriserat GARANTIA
- ej kategoriserat Rockville
- ej kategoriserat Microchip
- ej kategoriserat Hansgrohe
- ej kategoriserat Axis
- ej kategoriserat Yamazen
- ej kategoriserat Marklin
- ej kategoriserat Sony
- ej kategoriserat Konica Minolta
- ej kategoriserat I-Tec
- ej kategoriserat RCA
- ej kategoriserat Mestic
- ej kategoriserat Asrock
Nyaste ej kategoriserat Manualer
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025