Angler BB-RE-2436-V2 Bruksanvisning
Angler
Inte kategoriserad
BB-RE-2436-V2
Läs gratis den bruksanvisning för Angler BB-RE-2436-V2 (8 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 11 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 6 recensioner. Har du en fråga om Angler BB-RE-2436-V2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/8
BoomBox for Bowens Mount
BB-26DB-V2/BB-36DB-V2/BB-48DB-V2
BB-ST-1024-V2/BB-ST-1236-V2/BB-ST-1255-V2
BB-RE-2436-V2
INSTRUCTIONS
2
Setting Up the BoomBox
1. For Monolights and studio strobes with Bowens mounts, align the mounting
tabs with the Bowens mount and insert the BoomBox into the Bowens mount.
Turn the BoomBox clockwise until it locks.
2.
Open the BoomBox, and push the center ring
over the shaft until it’s all the way in, just like
an umbrella.
Tip: You may find it easier to hold the base of the shaft
through the side opening while pushing the center
ring over it.
3.
Adjust the BoomBox’s orientation by loosening
the adapter ring's thumbscrew and rotating the
BoomBox. Tighten the thumbscrew until secure.
Optional: To add the deflector to the BoomBox,
screw the deflector extension into the center stem.
Once it’s attached, slide the deflector plate onto the
extension.
Try experimenting with the curved side of the
deflector facing out or in, and by varying the distance
from the light source.
3
2
3
Attaching the Diusers
The inner and outer diusers add two levels of diusion that soften and spread the
light for an even and flattering eect. The diusers can be used with or without
the deflector plate.
1. Attach the inner diuser by attaching the diuser's touch-connect strips to
the touch connect tabs inside the BoomBox.
2. Attach the outer diuser by pressing the touch-
connect strips against the inner rim of the
BoomBox.
2
Removing the BoomBox
To remove the BoomBox from a Bowens mount:
1. Press the light fixture’s Bowens release.
2.
Turn the BoomBox counterclockwise and remove
it from the light.
3. If necessary, remove the diuser, deflector, and
extension. Then close the BoomBox by carefully
pulling on the center ring.
3
2
Produktspecifikationer
| Varumärke: | Angler |
| Kategori: | Inte kategoriserad |
| Modell: | BB-RE-2436-V2 |
Behöver du hjälp?
Om du behöver hjälp med Angler BB-RE-2436-V2 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Angler Manualer
8 April 2025
8 April 2025
8 April 2025
11 December 2024
11 December 2024
11 December 2024
11 December 2024
11 December 2024
11 December 2024
11 December 2024
Inte kategoriserad Manualer
- Buxton
- Vivolink
- Gewiss
- Wentronic
- JAR Systems
- Infinity
- RF Elements
- Aalberg Audio
- Adler
- Thermor
- Lumens
- IK Multimedia
- Saro
- Block & Block
- Boss
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025