Angler LCSB-1212 Bruksanvisning

Läs gratis den bruksanvisning för Angler LCSB-1212 (8 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 6.5 recensioner. Har du en fråga om Angler LCSB-1212 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/8
INSTRUCTIONS
Collapsible LED Softbox
LEDSB-1818
For 1 × 1 LED Lights
2
Overview
Corner straps
Securing straps
Adjustable corners
Recessed touch-connect strip
Carry bag
Notches
3
Attaching the Softbox
Preparing the Light Fixture
If the fixture has height adjustment knobs, raise the fixture’s height
so it sits above the bottom of the yoke.
Some 1 × 1 fixtures have two sets of side knobs for tilt and height
adjustment. Adjust the height so the tilt knobs are in the middle of
the fixture. This will make it easier to fit the softbox onto it.
Tip: Tilting the fixture upward in its yoke will make it easier to fit the
softbox onto the fixture.
Attaching the Softbox
1.
Open the adjustable corners held
together with straps and touch-
connect strips.
2.
Align the softbox with a 1 × 1 light so
the securing straps don’t interfere
with the light’s rear control panel.
Note: For Luxli’s Timpani, the securing straps should be on the
sides of the fixture, the buckles should be on the right, and the
strap that’s closest to the edge of the softbox is on top.
1

Produktspecifikationer

Varumärke: Angler
Kategori: Inte kategoriserad
Modell: LCSB-1212

Behöver du hjälp?

Om du behöver hjälp med Angler LCSB-1212 ställ en fråga nedan och andra användare kommer att svara dig