Anthro 030LG Bruksanvisning

Läs gratis den bruksanvisning för Anthro 030LG (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 36 personer och har ett genomsnittsbetyg på 4.2 stjärnor baserat på 6 recensioner. Har du en fråga om Anthro 030LG eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

TECHNOLOGY FURNITURE

®

300-5386-00

*300-5386-00*

Anthro PrinterCart

Assembly Instructions

01–Vertical Legs..............................Qty. 4.............................(see below)

15.10" Vertical Legs (035xx, 085xx)...................................125-5050-xx

23.875" Vertical Legs (030xx, 080xx)................................125-5020-xx

02–Insert Screws............................Qty. 4.........................325-5052-00

03–1.75" Large End Caps............Qty. 2.........................175-5021-xx

04–Caster Inserts...........................Qty. 4......................525-1000-00*

05–2

3

/

8

" Locking Casters................Qty. 2......................150-5003-00*

06–Base Tube Screws.....................Qty. 4.........................325-5000-00

07–2

3

/

8

" Non-Locking Casters........Qty. 2......................150-5002-00*

08–PrinterCart Base Tube.............Qty. 1.............................(see below)

24" Wide Base Tube.................................................125-5031-xx

36" Wide Base Tube.................................................125-5058-xx

09–Clamp Screws...........................Qty. 8.........................325-5086-03

10–Shelf Supports..........................Qty. 8.........................175-5060-xx

Component list for part#’s

030xx, 035xx, 080xx, 085xx.

11–Shelf Clamps.............................Qty. 8.........................175-5059-xx

12–PrinterCart Shelf.......................Qty. 2.............................(see below)

24” Wide PrinterCart Shelf.....................................100-6017-xx

36” Wide PrinterCart Shelf.....................................100-6107-xx

13–1.5" Small End Caps...............Qty. 4.........................175-5020-xx

14–Support Screws........................Qty. 8.........................325-5010-00

All Fastener quantities listed here are the minimum needed

for your Cart assembly. There may be a few extra

Fasteners included, which are not counted in the Parts List.

To make the assembly of your Anthro PrinterCart

even easier, we

have included all of the required tools (not shown above). The handy

Hex Driver Bit can be used in your electric drill in place of the Hex Driver.

Hex Driver

5

/

32

"........................Qty. 1.......................375-5000-00

Hex Driver Bit

5

/

32

"..................Qty. 1.......................375-5003-00

Anthro

Corporation Technology Furniture

®

10450 SW Manhasset Drive Tualatin, Oregon 97062

SAVE THESE INSTRUCTIONS!

anthro.com

Step 7

Carefully, rotate the Shelf Assembly (from Step 5),

upside down as shown.

Place the Base Tube Assembly (from Step 6) onto the

Vertical Legs of the Shelf Assembly.

Attach the Base Tube to each Leg using a total of four

Base Tube Screws.

Tighten all Support, Caster, and Base Tube Screws.

Step 8

Rotate your PrinterCart over onto the Casters.

Pop the 1.5" Small End Caps into the Vertical Legs and

the 1.75" Large End Caps into the Base Tube.

Congratulations!Your assembly is complete.

Please return the enclosed Registration Card to receive

our product updates, new catalogs, and sale flyers.

Thank you for choosing Anthro!

1.5" Small End Cap

1.75" Large End Cap

March 2006

Hello! Thank you for choosing Anthro.

Before beginning assembly of your Anthro

PrinterCart, please take a moment to

review the parts listed below to verify

that your shipment is complete.

✍Does your Cart have 4" Casters?*

(Such as a 030xx4. Your Caster Part

Numbers are given here.)

✍Does your Cart have Glides?*

(Such as a 030xxGL. Your Glide and Glide

Insert Part Numbers are given here.)

4" Locking Caster

150-5011-00

4" Non-Locking Caster

150-5010-00

Glide Insert

525-1004-00

Glide

325-5042-00

0406

07

03

02

09

10

05

12

01

08

13

11

14

Base Tube Screw

325-5000-00

Questions?1-800-325-3841

Produktspecifikationer