Anton/Bauer QR-DSLR Bruksanvisning
Anton/Bauer
Inte kategoriserad
QR-DSLR
Läs gratis den bruksanvisning för Anton/Bauer QR-DSLR (1 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 21 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 11 recensioner. Har du en fråga om Anton/Bauer QR-DSLR eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/1
Anton/Bauer Inc., 14 Progress Drive, Shelton, Connecticut 06484 USA • (203) 929-1100 • Fax (203) 925-4988 • support@antonbauer.com
Europe, B.V. Eurode Business Center, Eurode-Park 1-2, 6461 KB Kerkrade, The Netherlands • (+31) 45 5639220 • Fax (+31) 45 5639222 • eurosupport@antonbauer.com
Singapore Office - Anton/Bauer, 6 New Industrial Road, # 02-02 Hoe Huat Ind. Bld., Singapore 536199 • (+65) 62975784 • Fax (+65) 62825235
www.antonbauer.com 7595-0387 Rev C
QR-DSLR
Installation Instructions
This special Anton/Bauer® Gold Mount® bracket allows you to use your existing Logic
Series® batteries to power the Canon® EOS 5D Mark II, 7D, and 60D DSLR cameras. An
internal DC to DC converter automatically brings down the voltage of a 14.4 volt battery to
7.2 volts in order to power the camera; simply snap a battery onto the Gold Mount adapte
r
and plug the power cord into the camera. The bracket’s on-board PowerTap
® also provides
an additional 14.4 VDC nominal auxiliary DC output for Ultralight 2, UltraDAYlight,
ULHM-LED, or any other piece of equipment that may be powered by a 12 VDC (11-
17VDC) source (50 watts maximum). The pouch can accommodate the DIONIC
® 90,
DIONIC HC, and HyTRON® 50 batteries.
The QR-DSLR can be mounted to various third party shoulder support systems such as
RedRock® Micro*, Cinevate®, Shape®, Zacuto
®, and others that incorporate the Anton/Baue
r
mounting hole pattern in their design. This can be achieved by removing the sheet metal
backplate on the QR-DSLR and then using the existing four (4) screws to attach the QR-
DSLR to the shoulder support system.
*If attaching to a RedRock Microsystems cheese plate you may need one (1) backplate (P/N
5115-0405), and four (4) screws (P/N 6120-5522).
Use of unauthorized equipment in conjunction with Anton/Bauer products constitutes misuse under our warranties and may limit o
r
void those warranties. Anton/Bauer does not authorize, condone, recommend, or otherwise assume any liability or responsibilit
y
resulting from the use of any battery, charger, or accessory made by Anton/Bauer manufacture with any battery, charger, o
r
accessory not manufactured, produced or sold by Anton/Bauer unless otherwise indicated.
Canon® is a trademark or registered trademark of Canon registered in the US or other countries.
RedRock® is a trademark or registered trademark of RedRock registered in the US or other countries.
Cinevate® is a trademark or registered trademark of Cinevate registered in the US or other countries.
Shape® is a trademark or registered trademark of Shape registered in the US or other countries.
Zacuto® is a trademark or registered trademark of Zacuto registered in the US or other countries.
All brands, trademarks, and registered trademarks are the property of their respective holders.
A7595-0387 Rev C
DA-E751 Sht 1 of 1
Approved Copy
Produktspecifikationer
| Varumärke: | Anton/Bauer |
| Kategori: | Inte kategoriserad |
| Modell: | QR-DSLR |
Behöver du hjälp?
Om du behöver hjälp med Anton/Bauer QR-DSLR ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Anton/Bauer Manualer
31 Januari 2025
30 Januari 2025
30 Januari 2025
30 Januari 2025
30 Januari 2025
30 Januari 2025
30 Januari 2025
30 Januari 2025
28 Januari 2025
7 December 2024
Inte kategoriserad Manualer
- Singularity Computers
- Saramonic
- Tiptop Audio
- Urrea
- BZBGear
- EarthQuaker Devices
- Tamron
- EISL
- Advanced Network Devices
- Yamazen
- AMT
- QUIO
- Audioline
- Pyrex
- Graff
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025