AOC AS110D0 Bruksanvisning

Läs gratis den bruksanvisning för AOC AS110D0 (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 9 personer och har ett genomsnittsbetyg på 3.8 stjärnor baserat på 5 recensioner. Har du en fråga om AOC AS110D0 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/4
E
10~90mm
10~90mm
10~90mm
D
H
H
D
H
G
E
Hop on (G) into the
bottom twister (E)
according to the
thickness of table.
Monitor Size: 13~32"
Weight Capacity:2-9kg
VESA Size:75x75mm,100x100mm
Model:AS110D0
C
AOC Ergonomic Monitor Arm
Installation Manual
A:Clamp-Mounting
B:Hole-Mounting
C:Cable-Management
D:VESA Mount installation
E:Monitor angles adjustment
Packaging List
M4x12MM M5x12MM
Clamp-Mounting Procedures:
B :Hole-Mounting Procedure
A
Step
Step
Step
Step
Please tighten the
3 black screws (D)
onto the base
Warning
2
Warning:
Please make sure to
tighten the screws
Warning:
Please make sure to
tighten the screws
2
Insert screws from (E)
into (H) Plate, tighten
the 3 screws (D) onto
the arm base.
Diagram of full-assembled monitor arm spec in depthDiagram of full-assembled monitor arm spec in depth
Noted: Please freely adjust the clamp distance based on the
thickness of your desk.
MAX
Clamp-mounting Hole-mounting
=+
C
L-Plate Turner
Warning:
Please make sure to
tighten the screws
Once monitor
Warning:
Please make sure to
tighten the screws
Monitor Weight Adjustment
Step1
Once monitor is
stable,screw tighten top
2 and screw bottom 2
as well.
Step 2
Use hand manually
tighten A or B onto the top
2 holes ,then hook on the
monitor. Pls do not fully
tighten until monitor
is stable.
E: Adjust Monitor angles
AFTER INSTALLATION,
ADJUST GAS-SPRING POWER
1.Ensure Monitor is tighten to
monitor Arm
2.Ensure onitor is not
over-weight (2-9kg)
Weight Adjustment
Reduce Arm
Weight Capacity
Increase Arm
Weight Capacity
warning
warning
Noted: Please ensure monitor is within 2-9kg weight range
Condition 1: After attached monitor, your monitor is freely
moveable in any direction without adjustment.
Condition 2: After attached monitor, moitor will bounce
up, pls use ench provided turn “-“ clockwise direction
until stable.
Condition 3: After attached monitor, moitor will fall down,
pls use bench provided turn “+“ clockwise direction
until stable.
C. Cable Management.
D. VESA Mount Installation
pull out
upper
compartment
tighten screws
unscrew bottom
compartment
“+” Increase weight capacity
“Decrease weight capacity
AOC International
Europe B.V. Amstelgebouw, 6th floor
Prins Bernhardplein 200 1097 JB Amsterdam
The Netherlands
www.aoc.com
Made in China

Produktspecifikationer

Varumärke: AOC
Kategori: Inte kategoriserad
Modell: AS110D0

Behöver du hjälp?

Om du behöver hjälp med AOC AS110D0 ställ en fråga nedan och andra användare kommer att svara dig