Apart CHAMP-4 Bruksanvisning

Apart mottagare CHAMP-4

Läs gratis den bruksanvisning för Apart CHAMP-4 (12 sidor) i kategorin mottagare. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 2.5 recensioner. Har du en fråga om Apart CHAMP-4 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF
Sida 1/12
Champ - 4
Professional quad power amplier
• Caution: hot and sharp surfaces ! This professional device needs to be installed by
qualied personnel only.
Please check the carton box for any kind of damage on reception of the goods. In case of a •
damaged carton, please contact your dealer before opening the carton.
!!!! Danger !!!! Exposure to extremely high noise levels may cause a permanent hearing •
loss. Individuals vary considerably to noise induced hearing loss but nearly everyone will lose
somehearingifexposedtosufcientlyintensenoiseforasufcientamountoftime.Therefore
it is recommended that all persons exposed to equipment capable of producing high sound
pressurelevels,suchasthisamplier,beprotectedbyhearingprotectionwhileinstallingor
operating this unit.
• Read all documentation before operating your equipment.
Keep all documentation for future reference.•
Save the carton and packing material even if the equipment has arrived in good condition.•
Should you ever need to ship the unit, use only the original factory packing.•
Do not spill water or other liquids into or on the unit.•
Make sure power outlets conform to the power requirements listed on the back of the unit.•
Do not use the unit if the electrical power cord is frayed or broken.•
Always operate the unit with the AC ground wire connected to the electrical system ground.•
Havegaincontrolsonampliersturneddownduringpower-uptopreventspeakerdamageif•
there are high signal levels at the inputs.
Donotconnecttheinputs/outputsofampliersorconsolestoanyothervoltagesource,such•
asabattery,mainssource,orpowersupply,regardlessofwhethertheamplierorconsoleis
turned on or off.
Power down & disconnect units from mains voltage before making connections.•
Do not use the unit near stoves, heat registers, radiators, or other heat producing devices.•
Donotoperateequipmentonasurfaceorinanenvironmentwhichmaydistortthenormalow•
of air around the unit. If the unit is used in an extremely dusty or smoky environment, the unit
should be periodically “blown free” of dust.
Do not remove the cover. Removing the cover will expose you to potentially dangerous volt-•
ages.
Do not drive the inputs with a signal level higher than that required to drive equipment to full •
output.
Donotruntheoutputofanyamplierbackintoanotherinput.•
Do not ground the red output terminal, never connect a red output terminal to another red •
output terminal.
Incaseofmal-functionthisdeviceshouldbeservicedbyqualiedservicepersonnelonly.•
Customdesignedsidemountheatsinks,fourdiscreteclassABampliersinaoneunit19”•
enclosure.
Switchablehighandlowpassltersforeasyandtroublefreesubwoofer/satelliteapplications.•
IntegratedAPClimitercircuitryandclipindication.Thisintelligentcircuitwillpreventharsh•
distortion caused by clipping, provided that the input signal itself is not distorted of course…
what goes in, comes out.
Bridgeablepowerampliers:doubletheoutputpowerbyunitingthepowerof2ampliers.•
Minimum load impedance in bridge mode is 8 ohms.
Self-supportinglowresonanceframe.Torsionfreefrontandsidepanelconstructionwith•
integrated heatsink assembly.
Solidaluminumbrushedfrontpanelwithremovable19”bracketsandhandlesforuseina•
rack,noadditionalsupportneeded.Withoutthe19”bracketsitwillbeastandaloneunitin
high quality audio systems.
High power toroidal transformer.•
Low impedance power supply for improved dynamic response.•
Solid speaker binding posts.•
4 sets of banana screw plugs included.•
1. Features
2. Inputs and outputs
3. Rack mounting and wiring
4. standalone use
5. Technical specications

Produktspecifikationer

Varumärke: Apart
Kategori: mottagare
Modell: CHAMP-4

Behöver du hjälp?

Om du behöver hjälp med Apart CHAMP-4 ställ en fråga nedan och andra användare kommer att svara dig


mottagare Apart Manualer

Apart

Apart SBR160 Bruksanvisning

14 Oktober 2024
Apart

Apart REVAMP1680 Bruksanvisning

1 September 2024
Apart

Apart REVAMP2060T Bruksanvisning

28 Augusti 2024
Apart

Apart MA35 Bruksanvisning

26 Augusti 2024
Apart

Apart CHAMP-3D Bruksanvisning

24 Augusti 2024
Apart

Apart MA125 Bruksanvisning

24 Augusti 2024
Apart

Apart CHAMP-ONE-SLV Bruksanvisning

23 Augusti 2024
Apart

Apart PA8250 Bruksanvisning

22 Augusti 2024
Apart

Apart CONCEPT1T Bruksanvisning

21 Augusti 2024
Apart

Apart MA200 Bruksanvisning

21 Augusti 2024

mottagare Manualer

Nyaste mottagare Manualer

NAD

NAD C 388 Bruksanvisning

16 Juni 2025
NAD

NAD C725BEE Bruksanvisning

16 Juni 2025
NAD

NAD M15 HD Bruksanvisning

16 Juni 2025
NAD

NAD VISO Five Bruksanvisning

16 Juni 2025
NAD

NAD M17 V2i Bruksanvisning

16 Juni 2025
NAD

NAD T 977 Bruksanvisning

16 Juni 2025
NAD

NAD M15 HD2 AV Bruksanvisning

16 Juni 2025
NAD

NAD C 245BEE Bruksanvisning

16 Juni 2025
NAD

NAD M25 Bruksanvisning

16 Juni 2025
NAD

NAD T 775 Bruksanvisning

16 Juni 2025