Apart CM3T Bruksanvisning
Läs gratis den bruksanvisning för Apart CM3T (1 sidor) i kategorin högtalare. Guiden har ansetts hjälpsam av 7 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 4 recensioner. Har du en fråga om Apart CM3T eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/1
COLOUR KLEUR COULEUR POWER IMPEDANCE
Black Zwart Noir Common
GREEN GROEN VERT 1.5 Watt 6.66 KΩ
WHITE WIT BLANC 3 Watt 3.33 KΩ
RED ROOD ROUGE 6 Watt 1.66 KΩ
• Type : Dual Cone
• Woofer : 3” Coated Paper
• Rated Power RMS : 6 W / 100 Volt
• Music Power RMS : 10 W / 100 Volt
• Rated Power RMS : 10 W / 16 Ω
• Music Power RMS : 20 W / 16 Ω
• Trafo Power Tappings : 6 - 3 - 1.5W
• Impedance: 16 Ω / 100 Volt
• Dimensions Outside Ø : 105 mm
• Dimensions Cutout Ø : 82 mm
• Mounting Depth : 70 mm
• Weight : 0.525 Kg
The APart miniature metal CM speaker is a high quality built-in loudspeaker. It has a
full metal frame and a coated dual paper cone for the lowest distortion and increased
resistance against moisture. It can be used for 100 volt speaker lines as well as low
impedance systems, such as hi, surround or multi room ampliers/receivers.
For 100 volt systems, different power taps are present on the high quality built-in line
transformer: for background music with low background noise, you can use the lower
power taps. For maximum sound pressure level, use the highest power tap. The
APart technology avoids any overload of your amplier by applying the unique IMC
protection device.
For use as a low impedance speaker, you can bypass the transformer and connect
directly to the speaker. Our special impedance of 16 ohms allows you to connect up
to 4 speakers per channel onto a regular amplier than can drive 4 ohms, and 2 – 3
speakers onto an amplier than can drive 6 ohms. The APart technology offers you a
rich, clear and efcient sound, surpassing most of the regular 8 ohm speakers.
6 6 6 3 3 3 1.5 1.5++ + + + + +30 Watt =
40Watt Amplier
Amplier power must be higher than total power of all speakers.
Het versterkervermogen moet hoger zijn dan de som van de vermogens van de luidsprekers.
La puissance de l’amplicateur doit etre plus élevée que la puissance totale des haut parleurs.
The speaker is very easy to install, rst connect the speaker wires, then simply
grab the two spring clamps together and carefully slide the speaker in the mount-
ing hole.
16Ω 16Ω 16Ω 16Ω 16Ω 16Ω 16Ω
4Ω 4Ω
16Ω
Please disconnect the 100 Volt transformer for use in low Z applications. Connect the speaker lines
on the speaker directly. All necessary connection hardware is already included and mounted on the
speaker.
Gelieve de 100 V transformator bij gebruik in lage Z toepassingen af te koppelen. Koppel de luidsprekerka-
bels rechtstreeks op de luidsprekers aan. Alle benodigde verbindingsstukken zijn inbegrepen en reeds op de
luidspreker gemonteerd.
Veuillez déconnecter le transformateur lors d’usage en applications basse-Z. Connectez les cables haut-
parleur directement sur l’haut-parleur. Tout les pièces de connection sont comprises et déjà installées sur
l’haut-parleur.
Produktspecifikationer
| Varumärke: | Apart |
| Kategori: | högtalare |
| Modell: | CM3T |
Behöver du hjälp?
Om du behöver hjälp med Apart CM3T ställ en fråga nedan och andra användare kommer att svara dig
högtalare Apart Manualer
8 December 2024
8 December 2024
8 December 2024
8 December 2024
2 Oktober 2024
2 Oktober 2024
30 September 2024
21 September 2024
19 September 2024
15 September 2024
högtalare Manualer
- Rebeltec
- Audioengine
- Nec
- Linn
- NGS
- Algo
- Andover
- Renkforce
- Hisense
- ESX
- DCU
- Bearware
- Skytec
- Toshiba
- Antelope
Nyaste högtalare Manualer
23 Oktober 2025
20 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
19 Oktober 2025
18 Oktober 2025