Apart CONCEPT1 Bruksanvisning
Läs gratis den bruksanvisning för Apart CONCEPT1 (12 sidor) i kategorin mottagare. Guiden har ansetts hjälpsam av 5 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 3 recensioner. Har du en fråga om Apart CONCEPT1 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/12
3 basic operating modes combined in 1 device: stereo, 2Zone linked mono and 2Zone individual mono.
Paging microphone input with 2 zone programmable paging control.
Standalone and/or RS232 controlled operation.
Removable 19 inch rack ears included.
Menu driven hidden conguration accessible for installers only.
Lockable front panel controls.
Super simple no-nonsense user interface.
Multi functional stylish blue colour dot matrix gas display.
Presettable paging mic gain and separate tone control.
Integrated switchable highpass lter for use with optional subwoofers.
Separate line out and pre out.
4 stereo gain-adjustable line inputs with additional link-out on input 1.
Line 4 input also available as a mini jack in on the frontpanel for connection of personal audio devices.
Programmable maximum microphone and music levels for all zones.
Switchable automatic loudness compensation.
Low impedance (Concept 1) and 100 volt speaker line outputs (Concept 1T) available.
Powerfull dynamic power amplier circuit
Intelligent power limiter circuit.
1 or 2 zone paging microphone optionally available.
IR remote control optionally available.
IR control extender optionally available.
2
10
91 3 4 5
11
678
1) Power on/off button: push this button to turn the power on and off
2, 3, 4, 5) Source A-D selector: push this button to select line source A-D. A led above the knobs is
lit when source A-D is selected.
6) Source D mini jack input: this line input is shared with the source D connector at the rear
Only use one of the two at the same time.
7) Select button: push this button to select basic submenus
8) Multifunctional encoder knob: turn this knob to adjust the main volume and other menu parameters
9) Stand-by led: this led is lit when the unit is powered off by RS232 control or infrared remote.
The led will ash when data is transmitted or received from any remote control.
10) Infrared receiver
11) Multi functional dot matrix gas display
Produktspecifikationer
| Varumärke: | Apart |
| Kategori: | mottagare |
| Modell: | CONCEPT1 |
Behöver du hjälp?
Om du behöver hjälp med Apart CONCEPT1 ställ en fråga nedan och andra användare kommer att svara dig
mottagare Apart Manualer
14 Oktober 2024
1 September 2024
28 Augusti 2024
26 Augusti 2024
24 Augusti 2024
24 Augusti 2024
23 Augusti 2024
22 Augusti 2024
21 Augusti 2024
21 Augusti 2024
mottagare Manualer
- Futaba
- Mackie
- Mtx Audio
- Clarion
- AudioControl
- Musway
- Formuler
- Blaupunkt
- DataVideo
- Omnitronic
- Elektrobock
- Exibel
- Metronic
- Topp Pro
- HQ
Nyaste mottagare Manualer
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025