Apc AP9834 Bruksanvisning

Läs gratis den bruksanvisning för Apc AP9834 (1 sidor) i kategorin Nätverkskort/adapter. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 5.5 recensioner. Har du en fråga om Apc AP9834 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/1
APC USB Wi-Fi Device Quick Start Guide
AP9834
10/ /100
1000
NOTE: A supported Network Management
Card 3 (AP9641/AP9643) with valid TCP/IP
settings running firmware version 1.4 or
higher is required to use and configure the
APC USB Wi-Fi Device.
990-91418-001
09/2020
For more information and troubleshooting, refer to
the NMC 3 User Guide on the APC website -
apc.com/us/en/download/document/
SPD_CCON-AYCEFJ_EN
© 2020 Schneider Electric. All Rights Reserved. Schneider Electric and APC are trademarks and the
property of Schneider Electric SE, its subsidiaries and affiliated companies.
Enable and configure wi-fi via the NMC Web UI
( navigation path), or Configuration > Network > Wi-Fi
Command Line Interface ( command). For morewifi
information, consult the NMC 3 User Guide and CLI Guide
on the APC website - apc.com/upsnmc
Insert the APC USB
Wi-Fi Device into an
available USB port.
10100/ /
1000
USB
1
2
NOTE: The APC USB Wi-Fi Device’s
LED will flash green when wi-fi has
successfully been configured and
connected to the wi-fi network.

Produktspecifikationer

Varumärke: Apc
Kategori: Nätverkskort/adapter
Modell: AP9834

Behöver du hjälp?

Om du behöver hjälp med Apc AP9834 ställ en fråga nedan och andra användare kommer att svara dig