Apc Mobile Power Pack M12USWH Bruksanvisning

Apc powerbank Mobile Power Pack M12USWH

Läs gratis den bruksanvisning för Apc Mobile Power Pack M12USWH (2 sidor) i kategorin powerbank. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 7 recensioner. Har du en fråga om Apc Mobile Power Pack M12USWH eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
User Manual
Mobile Power Pack M12USWH
I
Charge USB Devices
Charge devices using the original
USB cable that comes with the
unit, or another USB charging
cable.
Connect the mobile power pack
with the device to be charged and
press the POWER button for
about 1 second.
Charge the Power Pack
Inventory Safety and General
Information
Read this user manual carefully
before using the product, and
keep it for future reference.
Do not short circuit this device. To avoid short
circuit, keep the device away from any metal
objects (e.g., hair clips and keys).
It is normal that the battery will feel warm
during heavy use.
Use this device as instructed to avoid electric
shock; do not disassemble.
This unit is not user repairable; contact APC for
tech support related issues.
• CAUTION
RISK OF FIRE AND BURNS.
Do not open, crush, heat above 40°C or
incinerate. Follow manufacturer's instructions.
During normal usage keep the device out in the
open to allow excess heat to dissipate.
Charge M12USWH for 2.5 hours before initial
use.
Keep the USB output port and micro-USB input
port clean and free of obstruction.
Failure to follow these instructions can result in
equipment damage.
Use the included charging cable
to connect the USB output port
of a USB charger or PC to the
micro-USB input port on the
power pack. (Note: some PCs in
sleep mode do no provide output
power to the USB port)
By USB charger By PC
.
LED Status Indicators
To check the remaining battery
charge of this device in standby
mode, press the POWER button
for about 1 second. The battery
capacity display will display
ho w mu ch ba ttery p owe r is
remaining
Indicator
Status Battery Full Battery
charging
Battery
inserted into
the UPS
Fault detected
on USB ports
Mobile
Power Pack
LEDs
All 5 LEDs
illuminate green
LEDs indicate
charge level.
Top LED
flashes.
One LED
illuminates
green from
bottom to top
All 5 LEDs
flash green
ma
001
a
Front View
m
a
002
a
Rear View
POWER button
1.0A USB port
2.4A USB port
Capacity Indicator LEDs
UPS connector (for use with BGE50ML only)
Micro-USB input
User Manual
USB cable
81-100%
61-80%
41-60%
21-40%
0-20%
Note: The charge times in this table
are approximate figures.
Device M12USWH
Smartphone 5x
Tablet ~ 1x


Produktspecifikationer

Varumärke: Apc
Kategori: powerbank
Modell: Mobile Power Pack M12USWH

Behöver du hjälp?

Om du behöver hjälp med Apc Mobile Power Pack M12USWH ställ en fråga nedan och andra användare kommer att svara dig