Apc Symmetra LX Bruksanvisning
Läs gratis den bruksanvisning för Apc Symmetra LX (2 sidor) i kategorin Accu. Guiden har ansetts hjälpsam av 33 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 17 recensioner. Har du en fråga om Apc Symmetra LX eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
Symmetra LX
Start-Up Guide
Extended Run Cabinets
For use with Symmetra LX UPS models:
990-1873-001 04/2005
®
200V, 4–8 kVA
208/240V, 4–8 kVA
220/230/240V, 4–8 kVA
200V, 4–16 kVA
208/240V, 4–16 kVA
220/230/240V, 4–16 kVA
READ FIRST
This guide is applicable for the Symmetra LX tower and rack-mount
extended run cabinet models. These units provide extended run time for the
Symmetra LX tower or rack-mount UPS models.
See and retain the product documentation shipped with your system for
other important installation, operation, and maintenance instructions.
Illustrations are representative. The Symmetra LX configuration, including
components and optional APC equipment, may be different from the models
shown in this guide.
Entire contents copyright 2005 by American Power Conversion Corporation.
All rights reserved. Reproduction in whole or in part without permission is
prohibited.
APC, the APC logo, InfraStruXure, PowerChute, Smart-UPS and Symmetra
are registered trademarks of American Power Conversion Corporation. All
other trademarks are the property of their respective owners.
9-Battery
Rack-mount
Extended Run
9-Battery
Tower
Extended Run
3-Battery
Rack-mount
Extended Run
Overview
1. Read Safety and General Information Instructions
2. Refer to the UPS Documentation
If installing the Symmetra LX and the Extended Run Cabinet(s),
install according to the instructions in the Symmetra LX Start-Up
Guide shipped with the UPS.
3. Install the Extended Run Cabinet(s)
Perform the physical installation for the extended run cabinet(s).
See the included Symmetra LX Physical Installation Guide.
4. Follow the proceeding Start-Up Instructions
See these instructions once the physical installation for the
Extended Run Cabinet(s) is complete. This section contains
information on how to connect, test, and start the unit.
Electrical
Hazard
• Read, understand and follow ALL safety
instructions contained in the Symmetra LX Safety
Instructions and General Information Guide.
• Failure to follow safety instructions and warnings
could result in equipment damage, serious injury,
or death.
Start-Up Instructions
1. Connect the first Extended Run Cabinet
1.1 Remove the screw and battery connector cover from the
back of the UPS.
1.2 Connect the power cable of the first extended run cabinet
to the UPS battery connector .
1.3 Set the dial of the extended run cabinet to ‘2’.
1.4 Connect the communications cable from the extended run
communications connector on the UPS to the connector on
the extended run cabinet .
Note
The illustrations shown in this section are applicable for the
tower and rack-mount extended run cabinets.
Note
If connecting to a UPS with integrated extended run, set the
dial of the first extended run cabinet to ‘3’ instead of ‘2’.
Produktspecifikationer
| Varumärke: | Apc |
| Kategori: | Accu |
| Modell: | Symmetra LX |
Behöver du hjälp?
Om du behöver hjälp med Apc Symmetra LX ställ en fråga nedan och andra användare kommer att svara dig
Accu Apc Manualer
14 December 2024
14 December 2024
14 December 2024
14 December 2024
4 September 2024
31 Augusti 2024
29 Augusti 2024
26 Augusti 2024
26 Augusti 2024
16 Augusti 2024
Accu Manualer
- Vetus
- APSystems
- Team Orion
- Shure
- PNY
- Parkside
- Ansmann
- PowerBass
- Gardena
- Carat
- Thomann
- Red Power
- Cobra
- Bosch
- HQ
Nyaste Accu Manualer
2 April 2025
20 Februari 2025
20 Februari 2025
31 Januari 2025
29 Januari 2025
25 Januari 2025
4 Januari 2025
3 Januari 2025
1 Januari 2025
31 December 2025