Appsys ProAudio ADS-8 Bruksanvisning
Appsys ProAudio
mottagare
ADS-8
Läs gratis den bruksanvisning för Appsys ProAudio ADS-8 (4 sidor) i kategorin mottagare. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 2 recensioner. Har du en fråga om Appsys ProAudio ADS-8 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
ADS-8
Active Splitter for ADAT® and TOSLINK®
optical audio connections
User's Manual
User's Manual
1. DESCRIPTION
1.1. Foreword
The ADS-8 ADAT/TOSLINK Splitter allows you to split digital audio connections
(e.g. ADAT or S/PDIF) from a single source into two sinks (like an „Y-cable“ ).
The active ADS-8 was designed to overcome the limitations of traditional passive
splitters which essentially half the amount of light on each output. This attenuated
signal is usually too weak for proper transmission of high-speed signals like ADAT.
In contrast, the ADS-8 receives the optical signal, converts it to an electrical signal
which can be split without loss to the out put transmitters which operate on each
port with full power.
This gives you a number of advantages:
Reliable, lossless, true bit-transparent splitting of any signal
Doubles maximum transmission distance of an optical connection from
normally 5-10m to 10-20m, depending on the equipment used
Compatible with all audio formats which can be sent over TOSLINK
Quality product “Made in Switzerland“
1.2. Box Contents
ADS-8 Splitter
Wide-range AC power adapter (country specific plug)
This manual
2. SETUP
1. Connect the supplied AC adapter (power supply) to the „DC Input“ jack
2. Connect the output of your audio signal source (ADAT source, sound card, CD/
DVD player...) to optical Input (labeled “Input“) using a standard TOSLINK
optical cable
3. Connect „Output 1“ to your first signal sink using a standard TOSLINK cable
4. Connect „Output 2“ to your second signal sink using a standard TOSLINK cable
The ADAT/TOSLINK Splitter is now ready to operate.
2
Produktspecifikationer
| Varumärke: | Appsys ProAudio |
| Kategori: | mottagare |
| Modell: | ADS-8 |
Behöver du hjälp?
Om du behöver hjälp med Appsys ProAudio ADS-8 ställ en fråga nedan och andra användare kommer att svara dig
mottagare Appsys ProAudio Manualer
2 Oktober 2025
mottagare Manualer
- Comtek
- IOTAVX
- Max
- Bowers And Wilkins
- UNITOPSCI
- Focusrite
- Shanling
- Elektrobock
- Konig & Meyer
- Canor
- Futaba
- Integra
- Renegade
- Metronic
- Aplic
Nyaste mottagare Manualer
3 Oktober 2025
3 Oktober 2025
3 Oktober 2025
3 Oktober 2025
3 Oktober 2025
3 Oktober 2025
3 Oktober 2025
3 Oktober 2025
3 Oktober 2025
3 Oktober 2025