Aqara Valve Controller T1 Bruksanvisning

Aqara ej kategoriserat Valve Controller T1

Läs gratis den bruksanvisning för Aqara Valve Controller T1 (14 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 11 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 6 recensioner. Har du en fråga om Aqara Valve Controller T1 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/14
Valve Controller T1 User Manual
Product Introduction
Aqara Valve Controller T1 is a valve controller based on Zigbee wireless
communication protocol, which is suitable for wireless control and manual control of
valves in pipelines. It can be linked with water leak/gas sensors and other devices to
realize risk identification, notification and treatment to protect home property and
personal safety.
* This device needs to be used with Aqara Home app and an Aqara Zigbee Hub,
hereinafter referred to as App and the Hub, Aqara Valve Controller T1, hereinafter
referred to as the device.
* For more Aqara product details, please visit www.aqara.com
Product Installation
4, 6 points pipe diameter
1. Find the valve piping where you plan to install the equipment, manually switch the
valve once to make sure that the valve is in a state where it can be normally switched
on and off, and please adjust the valve to open.
Note: At least 187 * 248 mm size should be reserved above the pipeline to ensure that
there is enough space to install the equipment.


Produktspecifikationer

Varumärke: Aqara
Kategori: ej kategoriserat
Modell: Valve Controller T1

Behöver du hjälp?

Om du behöver hjälp med Aqara Valve Controller T1 ställ en fråga nedan och andra användare kommer att svara dig