Argoclima KOMPASS IPX2 Bruksanvisning

Argoclima Värmare KOMPASS IPX2

Läs gratis den bruksanvisning för Argoclima KOMPASS IPX2 (11 sidor) i kategorin Värmare. Guiden har ansetts hjälpsam av 9 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 5 recensioner. Har du en fråga om Argoclima KOMPASS IPX2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/11

V 05/18

This product is only suitable for well insulated spaces or

occasional use.

OPERATING INSTRUCTIONS

Read the instructions carefully before operating the appliance or carrying out maintenance

operations.

Observe all the safety instructions; failure to observe the instructions may lead to accidents and/or

damage. Store these instructions.

WALL-MOUNTED CERAMIC FAN HEATERS

IPX2

V 05/18

GENERAL SAFETY INFORMATION

 Use this fan heater only as outlined in this manual. Any other use

not recommended by the manufacturer may cause fire, electric

shock or injury to persons.

 Make sure that the type of mains power complies with the electrical

requirements of the fan heater (220-240 V~50 Hz).

 This fan heater is designed for wall-installation; it must be

mounted 1.8 m above the floor and at least 25 cm from the wall

on each side. Do not use it as a floor-standing device.

 This appliance can be used by children of at least 8 years of age

and by people with reduced physical, sensory or mental abilities, or

who lack sufficient experience or the necessary knowledge,

provided that they are supervised or have been instructed on how to

use the appliance safely and understand the hazards related to its

use.

 Children must not be allowed to play with the appliance.

 Cleaning and maintenance operations normally carried out by the

user must not be performed by unsupervised children.

 This product is not a toy. Children under the age of 3 years must be

kept out of reach unless properly supervised, to ensure that they do

not play with the appliance.

 Children aged between 3 and 8 year the s must only be able to turn

appliance on/off, provided that the appliance has been placed in its

normal operating position, that instructions have been given on how

to use the equipment safely, and that its risks have been

understood.

 Children aged between 3 and 8 years must not be able to plug in,

adjust, clean or perform any maintenance on the appliance.

 WARNING: Certain parts of this product may become very hot and

cause burns. Special care should be taken when children and

vulnerable people are nearby.

 To avoid the risk of accidentally resetting the thermal protection, this

appliance must not be powered through an external switching

device, such as a timer, or connected to a circuit that is switched on

and off by the utility.

 WARNING: Do not use the fan heater with a controller or any

other device that activates the appliance automatically, as

there may be a risk of fire if the fan heater is covered or

incorrectly positioned.

V 05/18

 The appliance is equipped with an IPX2 degree of protection

and can be used in private bathrooms in zone 2.

The appliance must not be touched by people that use bath tubs and

showers.

 Do not restrict the air inlet and outlet grilles.

 The appliance heats up significantly when running and can cause

burns. Avoid unprotected contact with the hot surface.

 Keep flammable materials, such as furniture, cushions, blankets,

paper, cloths, curtains and similar items at least 1 m away from the

front, sides and back of the appliance.

 Disconnect the mains power when the appliance is not in use or

during cleaning.

 Avoid using the fan heater in dusty environments or in the presence

of flammable vapours (e.g. in workshops or garages).

 Do not place anything on the product; avoid placing wet garments

on the fan heater.

 Use the fan heater in a well-ventilated area.

 Avoid placing fingers or foreign objects in the air inlet/outlet grilles,

as this may lead to electric shock or fire and may damage the fan

heater.

 To prevent the risk of fire, do not block the grilles or tamper with

them in any way while the fan heater is in use.

 Do not use the appliance if the power cable or plug are

damaged. If the power supply cable is damaged, it must be

replaced by the manufacturer, d erson ealer or a similarly qualified p

so as to avoid any safety risks.

 Do not use the fan heater if it has fallen from a certain height or if it

has been damaged in any way. Contact a service centre to check

V 05/18

the fan heater or make any necessary electrical or mechanical

repairs.

 The most common cause of overheating is the build-up of dust in

the appliance. Remove accumulated dust, after taking the plug out,

by cleaning the grilles using a vacuum cleaner.

 Do not use any abrasive products to clean the appliance. Clean it

using a damp (not wet) cloth rinsed in soapy water. Remove the

plug from the socket before performing any maintenance.

 To disconnect the fan heater, turn the switch to OFF and remove

the plug from the socket. Pull on the plug only. Do not pull on the

cable when turning off the fan heater.

 Do not place any objects on the cable and also avoid bending the

cable.

 Using extension leads are not recommended as they may overheat

and cause a fire hazard. Never use a single extension lead to

operate multiple appliances.

 Do not immerse the power cable, plug or any other part of the

appliance in water or other liquids.

 Do not touch the plug with wet hands.

 Do not place the fan heater above or near another heat source.

WARNING: AVOID COVERING THE FAN HEATER TO PREVENT IT

FROM OVERHEATING.

The symbol below signals this warning:

 The fan heater may cause the risk of fire if, while operating, it is

covered or comes into contact with material including flammable

curtains, drapery, blankets, etc. KEEP THE FAN HEATER AWAY

FROM THESE MATERIALS.

 Do not connect the fan heater to the power supply until it has been

correctly assembled or positioned.

 Do not run the cable under carpets. Do not cover the cable with

blankets, carpets or similar materials. Place the cable away from

busy areas and where it cannot accidentally be pulled out.

 Do not operate the fan heater in close proximity to bathtubs,

showers, washbasins or pools.

 Do not position the fan heater beneath a power socket.

 Do not operate the appliance outdoors.

V 05/18

 Upon initial start-up, the fan heater may emit a slight, harmless

smell. This smell is a normal effect of the initial heating up of the

internal heating elements, and should not recur subsequently.

WARNING:

THE ON/OFF SWITCH IS NOT THE ONLY METHOD OF

DISCONNECTING THE MAINS POWER.

ALWAYS UNPLUG THE APPLIANCE DURING MAINTENANCE

OPERATIONS, WHEN MOVING IT OR WHILE IT IS NOT IN USE.

 A fan heater contains parts that generate electrical arcs and sparks.

It must not be used in potentially dangerous areas such as those

subject to the risk of fire or explosion, or areas filled with chemical

substances or humidity.

 Always unplug the appliance when it is not in use.

 Turn the appliance off if unattended, in order to prevent accidents.

 In the event of any anomalies (abnormal noise or a strange smell),

immediately turn off the appliance; do not attempt to repair it but

take it to your local service centre.

DESCRIPTION OF PARTS

1. Air suction grille

2. LED display

3. Air output grille

4. Horizontal flap

5. TIMER button

6. Function selection F button

7. Remote control

HOW TO INSTALL THE FAN HEATER

The fan heater must be t installation. The installation sequence installed on the wall before use. Do not try to use it withou is

listed below:

1. Select a space for installing the appliance (figure 1).

2. Drill two holes on the wall that are suitably sized for inserting the Ø 8 mm Fischer screw plugs. (figure 2) – D=575 mm

V 05/18

3. Insert the Fischer screw plugs into the holes and tighten the screws provided.

NOTE: Tighten the screws securely. Do not insert the screws into the Fischer plugs entirely - leave around 10 mm free.

4. Mount the appliance on the wall (figure 3).

Ensure that the holes on the rear of the appliance are directed towards the two screws, push the fan heater backwards

onto the wall then downwards until it lies in a stable position.

CONTROL PANEL AND LED DISPLAY ON THE APPLIANCE

TIMER LED

TEMPERATURE

°C LED

ROOM

TEMPERATURE

DISPLAY

ECO Mode LED

energy saving (1000

COMFORT Mode LED

Maximum heat

(

2000 W

)

Figure 1 Figure 2 Figure 3

Fischer

WEEKLY

TIMER LED

OPEN WINDOWS

Mode LED

TIMER BUTTON

ON/OFF BUTTON

F BUTTON

Function selection

V 05/18

REMOTE CONTROL

1. ON/OFF button - switching on/off from stand-by mode

2. SWING button - flap swivel setting

TIMER button - setting daily timer ON/OFF (1-12h)

4. SET button - set

5. MODE button - fan mode setting cold, ECO, COMFORT

6. Button - temperature regulation

7. OK button - confirm weekly programmes

8. + Button temperature regulation

9. Open window function activation button

10. DAY button - day selection for weekly timer

11. P button - weekly Timer activation

12. Time ON button – weekly timer switch ON setting

13. EDIT button - weekly timer operation period setting

14. Time OFF button - weekly timer switch OFF setting

Use Lithium/Manganese button cells, model no. CR2025 -3 V, conforming to Battery Directive no. 2006/66/EC (not supplied).

HOW TO INSERT / REMOVE THE REMOTE CONTROL BATTERIES (refer to the diagram below)

Open the battery cover at the back of the remote control (press the back and pull the flap).

Insert the battery into the slot, making sure you respect the polarities.

Put the cover back onto the remote control.

INFORMATION FOR THE CORRECT DISPOSAL OF BATTERIES IN ACCORDANCE WITH EUROPEAN DIRECTIVE

2006/66/EC

Replace batteries when they are depleted. At the end of their life, batteries must be disposed of separately from unsorted

waste. They must be taken to designated recycling centres or returned to a retailer providing this service. Separate disposal of

batteries prevents potential negative effects on the environment and human health due to inadequate disposal, and also allows

their constituent materials to be recovered and recycled, resulting in significant savings in terms of ener n gy and resources. I

order to highlight the obligation regarding separate disposal, the battery carries the crossed-out dustbin symbol. Illegal disposal

of the product by the user may lead to administrative sanctions being applied as per current regulations.

Produktspecifikationer

Varumärke:	Argoclima
Kategori:	Värmare
Modell:	KOMPASS IPX2
Färg på produkten:	Zwart
Vikt:	700 g
Bredd:	102 mm
Djup:	154 mm
Höjd:	25 mm
Förpackningens vikt:	1000 g
Användarmanual:	Ja
Husmaterial:	Aluminium
Videolägen som stöds:	480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Inkluderar AC-adapter:	Ja
Certifiering:	CE/FCC/UL
HDCP:	Ja
Maximal videoupplösning:	- Pixels
Ljudutgång:	2
siffra:	1
Videoingång:	1
Extern anpassning:	Ja
Strömförsörjning via USB:	Nee
Värdgränssnitt:	VGA (D-Sub)
Video av:	1
Driftspänning:	5 V
Drifttemperatur (TT):	0 - 48 °C
Utgångsgränssnitt:	HDMI
Aktiv ström:	2.6 A