ART Tube MP/C Bruksanvisning
Läs gratis den bruksanvisning för ART Tube MP/C (17 sidor) i kategorin Processor. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 1.5 recensioner. Har du en fråga om ART Tube MP/C eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/17
Tube MP/C
User’s Manual
II
IMPORTANT SAFETY INSTRUCTIONS – READ FIRST
This symbol, wherever it appears, This symbol, wherever it appears, alerts
alerts you to the presence of uninsulated you to important operating and maintenance
dangerous voltage inside the enclosure. Voltage instructions in the accompanying literature.
that may be sufficient to constitute a risk of shock. Please read manual.
Read instructions:
Retain these safety and operating instructions for future reference. Heed all warnings printed here and on the equipment. Follow the operating
instructions printed in this user guide.
Do not open:
Aside from two vacuum tubes, there are no user serviceable parts inside. Refer any service work to qualified technical personnel only.
Power sources:
Only connect the unit to mains power of the type marked on the rear panel. The power source must provide a good ground connection.
Power cord:
Use the power cord with the mains plug appropriate for your local mains supply as provided with the equipment. If the provided plug does not fit into
your outlet consult your service agent. Route the power cord so that it is not likely to be walked on, stretched or pinched by items placed upon or
against.
Grounding:
Do not defeat the grounding and polarization means of the power cord plug. Do not remove or tamper with the ground connection on the power cord.
Ventilation:
Do not position the unit where the air required for ventilation is impeded. If the unit is to be operated in a rack, case or other furniture, ensure that it is
constructed to allow adequate ventilation.
Moisture:
To reduce the risk of fire or electrical shock do not expose the unit to rain, moisture or use in damp or wet conditions. Do not place a container of
liquid on it, which may spill into any openings.
Heat:
Do not locate the unit in a place close to excessive heat or direct sunlight, as this could be a fire hazard. Locate the unit away from any equipment,
which produces heat such as: power supplies, power amplifiers and heaters.
Environment:
Protect from excessive dirt, dust, heat, and vibration when operating and storing. Avoid tobacco ash, drink spillage and smoke, especially that
associated with smoke machines.
Handling:
To prevent damage to the controls and cosmetics avoid rough handling and excessive vibration. Protect the controls from damage during transit. Use
adequate padding if you need to ship the unit. To avoid injury to yourself or damage to the equipment take care when lifting, moving or carrying the
unit.
Servicing:
Switch off the equipment and unplug the power cord immediately if it is exposed to moisture, spilled liquid, objects fallen into opening, or the power
cord or plug becomes damaged during a lightning storm or if smoke odor or noise is noted. Refer servicing to qualified technical personnel only.
Installation:
Install the unit in accordance with the instructions printed in the user guide.
III
IMPORTANT SAFETY INSTRUCTIONS – READ FIRST .................................. II
INTRODUCTION ............................................................................................. 1
OVERVIEW ..................................................................................................... 2
SETTING UP ................................................................................................... 2
Unpacking 2 ....................................................................................................................................
AC Power Hookup ....................................................................................................................... 2
Installation .................................................................................................................................... 3
Powering up . 3 ................................................................................................................................
FRONT PANEL CONTROLS & INDICATORS ................................................... 4
Gain Control ................................................................................................................................. 4
Gain Switch .................................................................................................................................. 4
Low Cut Switch ............................................................................................................................. 4
Tube Drive Display ....................................................................................................................... 4
Threshold Control ......................................................................................................................... 5
Slope Switch ................................................................................................................................. 5
Speed Switch ................................................................................................................................ 5
Phase Switch ............................................................................................................................... 6
Opto Comp Switch ........................................................................................................................ 6
Gain Reduction Display ................................................................................................................ 6
The Output Level Control .............................................................................................................. 6
Output Level Display..................................................................................................................... 6
REAR PANEL FUNCTIONS ............................................................................. 7
Power ........................................................................................................................................... 7
Input and Output Connections ..................................................................................................... 7
Input ............................................................................................................................................. 7
Balanced Output ........................................................................................................................... 7
Unbalanced Output ....................................................................................................................... 8
Output Switch ............................................................................................................................... 8
Phantom Power Switch ................................................................................................................. 8
APPLICATIONS ............................................................................................. 9
Using the Tube MP/C as a DI ....................................................................................................... 9
Tracking ....................................................................................................................................... 9
Re- 9 Amping ...................................................................................................................................
Special Effects ............................................................................................................................ 10
TUBE REPLACEMENT .................................................................................. 10
WARRANTY INFORMATION: ........................................................................ 11
SERVICE: ...................................................................................................... 11
SPECIFICATIONS: ........................................................................................ 12
Produktspecifikationer
| Varumärke: | ART |
| Kategori: | Processor |
| Modell: | Tube MP/C |
Behöver du hjälp?
Om du behöver hjälp med ART Tube MP/C ställ en fråga nedan och andra användare kommer att svara dig
Processor ART Manualer
31 Juli 2025
31 Juli 2025
31 Juli 2025
10 December 2024
21 Augusti 2024
18 Augusti 2024
7 Augusti 2024
Processor Manualer
- Digitus
- Zoom
- AuviTran
- SEADA
- Kramer
- Asus
- DAS Audio
- Manley
- Golden Age Project
- MuxLab
- DataVideo
- Henry Engineering
- Vivolink
- Luminex
- Hikvision
Nyaste Processor Manualer
31 Juli 2025
31 Juli 2025
26 Juli 2025
25 Juli 2025
24 Juli 2025
22 Juli 2025
19 Juli 2025
19 Juli 2025
18 Juli 2025
9 Juli 2025