Artec Parametric EQ Bruksanvisning
Sidor 1 ej kategoriserat
Läs bruksanvisningen för Artec Parametric EQ gratis online eller ladda ner PDF:en. 58 personer har tyckt att guiden var hjälpsam. Fråga om modellen? Ställ en fråga
- Battery: 9V 6LR6l or 6F22Alkaline
- DC power supply: 9V Regulated
- Power consumption: 10mA
- Frequency response : 10Hz to 20kHz
- Input impedance : 1Mohm
- Output impedance : 1kohm
- Dimension: 75.5 x 115.5 x 47.5 (mm)
- Weight: 260g (include battery)
2012-A-ENG
Parametric Equalizer
If use a battery, When the indicator goes blinking or no longer lights while
an effect is on, it means that the battery is nearly dead and must be
replaced. Also it means that the voltage of power supply is too low or
disconnected if use a power supply system.
When use the pedal with batteries, Please use batteries to ALKALINE
prevent leaking damage.
When use the pedal with a AC adaptor or DC power supply system,
Please use DC9V REGULATED (100mA or higher) power supply. Using
unregulated or switching power for IT system can cause of HUM NOISE
of high frequency noise.
Specifications
Battery & Power
The products manufactured by ARTEC will be free from defect in
workmanship and meterials for a period of two years from proven date.
For warranty, please contact the autholized dealer or shop in your region.
Professional Parametric Equalizer for all Instrument
Limited Warranty
SE-PEQ
8
7
9
1
3
5
4
6
2
1
0
8
7
9
1
3
5
4
6
2
1
0
LEVELFREQ
WIDTH
GAIN
INPUT
DC9V
OUTPUT
Parametric
Equalizer
SE-PEQ
Band frequency
30 - 8000 Hz
Output Level
control
Band width
narrow - wide
Band gain
-10dB - +10dB
Foot switch
Effect - Bypass
(Direct Bypass)
- Battery: 9V 6LR6l or 6F22Alkaline
- DC power supply: 9V Regulated
- Power consumption: 10mA
- Frequency response : 10Hz to 20kHz
- Input impedance : 1Mohm
- Output impedance : 1kohm
- Dimension: 75.5 x 115.5 x 47.5 (mm)
- Weight: 260g (include battery)
2012-A-ENG
Parametric Equalizer
If use a battery, When the indicator goes blinking or no longer lights while
an effect is on, it means that the battery is nearly dead and must be
replaced. Also it means that the voltage of power supply is too low or
disconnected if use a power supply system.
When use the pedal with batteries, Please use batteries to ALKALINE
prevent leaking damage.
When use the pedal with a AC adaptor or DC power supply system,
Please use DC9V REGULATED (100mA or higher) power supply. Using
unregulated or switching power for IT system can cause of HUM NOISE
of high frequency noise.
Specifications
Battery & Power
The products manufactured by ARTEC will be free from defect in
workmanship and meterials for a period of two years from proven date.
For warranty, please contact the autholized dealer or shop in your region.
Professional Parametric Equalizer for all Instrument
Limited Warranty
SE-PEQ
8
7
9
1
3
5
4
6
2
1
0
8
7
9
1
3
5
4
6
2
1
0
LEVELFREQ
WIDTH
GAIN
INPUT
DC9V
OUTPUT
Parametric
Equalizer
SE-PEQ
Band frequency
30 - 8000 Hz
Output Level
control
Band width
narrow - wide
Band gain
-10dB - +10dB
Foot switch
Effect - Bypass
(Direct Bypass)
Produktspecifikationer
| Varumärke: | Artec |
| Kategori: | ej kategoriserat |
| Modell: | Parametric EQ |
Behöver du hjälp?
Om du behöver hjälp med Artec Parametric EQ ställ en fråga nedan och andra användare kommer att svara dig
ej kategoriserat Artec Manualer
Artec SE-NGT Bruksanvisning Artec Cubix G1R Bruksanvisning Artec SE-OE3 Bruksanvisning Artec Memphisys 66 Bruksanvisning Artec SE-ADL Bruksanvisning Artec SE-2 Bruksanvisning Artec SE-VPH Bruksanvisning