Artsound MX-60 Bruksanvisning
Läs gratis den bruksanvisning för Artsound MX-60 (8 sidor) i kategorin mottagare. Guiden har ansetts hjälpsam av 36 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 18.5 recensioner. Har du en fråga om Artsound MX-60 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/8
OPERATING MANUAL
MX-60(M)
MIXER ZONE AMPLIFIER
Please follow the instructions in this manual to obtain the optimum
results from this unit.
We also recommend that you keep this manual handy for future reference
Check our website for any updates of this manual: www.artsound.be
Table of contents
1. Safety precautions 2
2. General description 3
3. Features 3
4. Nomenclature and functions 4
4.1 Front panel 4
4.2 Rear panel 5
5. Specifications 7
6. Dimensional diagram 7
MX-60(M)
2
1 Safety precautions.
• Be sure to read the instructions in this section carefully before use.
• Make sure to observe the instructions in this manual as the conventions of safety symbols and messages regarded
as very important precautions are included.
• We also recommend you keep this instruction manual handy for future reference.
Warnings and safety.
SAFETY SYMBOL AND MESSAGE CONVENTIONS.
Safety symbols and messages described below are used in this manual to prevent bodily injury and property damage,
which could result from mishandling. Before operating your product, read this manual rst and understand the safety
symbols and messages so you are thoroughly aware of the potential safety risk.
Warning.
WHEN INSTALLING THE UNIT.
• Do not expose the unit to rain or an environment
where it may be splashed by water or other liquids, as
doing so may result in re or electric shock.
• Use the unit only with the voltage specied on
the unit. Using a voltage higher than that which is
specied may result in re or electric shock.
• Do not cut, kink, otherwise damage nor modify the
power supply cord. In addition, avoid using the power
cord in close proximity to heaters, and never place
heavy objects -- including the unit itself -- on the
power cord, as doing so may result in re or electric
shock.
• Be sure to replace the unit’s terminal cover after
connection completion. Because high voltage is applied
to the speaker terminals, never touch these terminals
to avoid electric shock.
• Be sure to ground to the safety ground (earth)
terminal to avoid electric shock. Never ground to a gas
pipe as a catastrophic disaster may result.
• Avoid installing or mounting the unit in unstable
locations, such as on a rickety table or a slanted
surface. Doing so may result in the unit falling down,
causing personal injury and/or property damage.
WARNING
INDICATES A POTENTIALLY HAZARDOUS SITUATION WHICH, IF MISHANDLED, COULD RESULT
IN DEATH OR SERIOUS PERSONAL INJURY.
CAUTION
INDICATES A POTENTIALLY HAZARDOUS SITUATION WHICH, IF MISHANDLED, COULD RESULT
IN MODERATE OR MINOR PERSONAL INJURY, AND/OR PROPERTY DAMAGE.
WHEN THE UNIT IS IN USE.
• Should the following irregularity be found during use,
immediately switch off the power, disconnect the
power supply plug from the AC outlet and contact your
nearest ArtSound dealer. Make no further attempt to
operate the unit in this condition as this may cause re
or electric shock.
• If you detect smoke or a strange smell coming from
the unit.
• If water or any metallic object gets int o the unit
• If the unit falls, or the unit case breaks
• If the power supply cord is damaged (exposure of
the core, disconnection, etc.)
• If it is malfunctioning (no tone sounds.)
• To prevent a re or electric shock, never open nor
remove the unit case as there are high voltage compo-
nents inside the unit. Refer all servicing to your near-
est ArtSound dealer.
• Do not place cups, bowls, or other containers of liquid
or metallic objects on top of the unit. If they acciden-
tally spill into the unit, this may cause a re or electric
shock.
• Do not insert nor drop metallic objects or ammable
materials in the ventilation slots of the unit’s cover, as
this may result in re or electric shock.
MX-60(M)
3
2. General description.
3. Features
The MX-60 (M) mixer-amplier is an all-in-one solution for commercial and industrial applications in a compact size.
• 3 mic inputs en 2 line-in with XLR, 6,3mm jack or
RCA
• priority input + trigger contact (euroblock) with level
and talkover control
• 3 levels of priority
• media source USB/SD, FM tuner, BT (ref. MX-60M)
• 60W power output @ 70V / 100V / 4 Ohm / 8 Ohm
• advanced protection system includes current limit-
ing, over current and thermal protection
• two bands tone control (bass & treble)
• convection cooling – maintenance free
• compact size and lightweight
WHEN THE UNIT IS IN USE.
Caution.
WHEN INSTALLING THE UNIT.
AN ALL-POLE MAINS SWITCH WITH A CONTACT SEPARATION OF AT LEAST 3 MM IN EACH POLE SHALL BE
INCORPORATED IN THE ELECTRICAL INSTALLATION OF THE BUILDING.
Due to product upgrades, while some of the features and specication in the user manual does not
match the actual functions, sorry for any inconvenience and thanks for your kind understanding!
• Never plug in nor remove the power supply plug with
wet hands, as doing so may cause electric shock.
• When unplugging the power supply cord, be sure to
grasp the power supply plug; never pull on the cord
itself. Operating the unit with a damaged power supply
cord may cause a re or electric shock.
• When moving the unit, be sure to remove its power
supply cord from the wall outlet. Moving the unit with
the power cord connected to the outlet may cause
damage to the power cord, resulting in re or electric
shock. When removing the power cord, be sure to hold
its plug to pull.
• Do not block the ventilation slots in the unit’s cover.
Doing so may cause heat to build up inside the unit
and result in re.
• Avoid installing the unit in humid or dusty locations,
in locations exposed to the direct sunlight, near the
heaters, or in locations generating sooty smoke or
steam as doing otherwise may result in re or electric
shock.
• Do not place heavy objects on the unit as this may
cause it to fall or break which may result in personal
injury and/or property damage. In addition, the object
itself may fall off and cause injury and/or damage.
• Make sure that the volume control is set to minimum
position before power is switched on.
• Loud noise produced at high volume when power is
switched on can impair hearing.
• Do not operate the unit for an extended period of time
with the sound distorting. This is an indication of a
malfunction, which in turn can cause heat to generate
and result in a re.
• Contact your ArtSound dealer as to the cleaning. If
dust is allowed to accumulate in the unit over a long
period of time, a re or damage to the unit may result.
• If dust accumulates on the power supply plug or in the
wall AC outlet, a re may result. Clean it periodically.
In addition, insert the plug in the wall outlet securely.
• Switch off the power, and unplug the power supply
plug from the AC outlet for safety purposes when
cleaning or leaving the unit unused for 10 days or
more. Doing otherwise may cause a re or electric
shock.
Produktspecifikationer
| Varumärke: | Artsound |
| Kategori: | mottagare |
| Modell: | MX-60 |
Behöver du hjälp?
Om du behöver hjälp med Artsound MX-60 ställ en fråga nedan och andra användare kommer att svara dig
mottagare Artsound Manualer
14 Augusti 2025
14 Augusti 2025
14 Augusti 2025
5 Januari 2025
4 Oktober 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
mottagare Manualer
- Audiolab
- Wharfedale
- Golden Age Project
- Canton
- Intertechno
- Twelve South
- Elektrobock
- Cisco
- WesAudio
- Pro-Ject
- Kicker
- PEMP
- Alto
- Godox
- Loxjie
Nyaste mottagare Manualer
16 September 2025
15 September 2025
14 September 2025
14 September 2025
14 September 2025
14 September 2025
14 September 2025
14 September 2025
13 September 2025
13 September 2025