ATen BP72V18AH Bruksanvisning

ATen Inte kategoriserad BP72V18AH

Läs gratis den bruksanvisning för ATen BP72V18AH (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 15 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 8 recensioner. Har du en fråga om ATen BP72V18AH eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

1 Important Safety Instructions

Please comply with all warnings and operating instructions in this manual strictly. Read

the following instructions carefully before installing the unit. Do not operate this unit

before reading through all safety information and operating instructions carefully.

• Do not try to repair the unit yourself, contact your local supplier or your warranty

will be void.

• To eliminate any overheating of the battery box, keep all ventilation openings free

from obstruction and do not place any foreign objects on top of the battery bank.

Keep the battery box 20cm away from the wall.

• Make sure the battery box is installed within the proper environment as specified.

(0-40°C and 30-90% non-condensing humidity)

• Do not install the battery box under direct sunlight. Your warranty will be void if the

batteries fail due to overheating.

• This battery box is not designed for use in dusty, corrosive and salty environment.

• The warranty for this battery bank will be void if water or other liquid is spilt or

poured directly onto the battery box. Similarly we do not warrant any damage to

the battery box if foreign objects are deliberately or accidentally inserted into the

battery box enclosure.

• The battery will discharge naturally if the system is unused for a period of time.

• It should be recharged every 2-3 months if unused. If this is not done, then the

warranty will be null and void. During normal operation, the batteries will be

automatically remained in charged condition.

• Servicing of batteries should be performed or supervised by trained personnel with

knowledge of batteries and the required precautions.

• When replacing batteries, it is necessary to replace ALL batteries with the same

quantity, type & capacity.

• CAUTION – Do not dispose of battery or batteries in a fire. The battery may

explode.

• CAUTION – Do not open or mutilate the batteries. The electrolyte from the

batteries is toxic and harmful to the skin and eyes.

• CAUTION – Risk of Electric Shock –Hazardous voltage may exist between battery

terminals and ground. Test before touching with bare hands.

• CAUTION – A battery can present a risk of electrical shock and high short circuit

current. The following precaution should be observed when working on

batteries:

1. Remove watches, rings, or other metal objects.

2. Use tools with insulated handles.

3. Wear rubber gloves and boots.

4. Do not lay tools or metal parts on top of batteries.

5. Disconnect charging source prior to connecting or disconnecting battery

terminals.

• Do not plug or unplug the battery connector if UPS works in DC (discharging)

mode.

2 Product Overview and Setup

NOTE: Before installation, please inspect the unit. Be sure that nothing inside the

package is damaged. Please keep the original package in a safe place for future

use.

2.1 Rear Panel View



DC connector: connects to either UPS or a 2

battery box



DC breaker: Battery over-current protection breaker

2.2 Installation and Setup with UPS

Unpacking and Inspection

1. Remove the battery box from the packing.

Note: The battery box is very heavy, be cautious when unpacking and lifting

the unit to avoid injury.

2. Check the inside package

 Battery box unit

 Quick guide

 Battery connection cable x 1

 Ear x 2 & screw x 8

 Extended stand

Battery Box User Manual

Battery connection cable

Ears Screws

Extended stand

Produktspecifikationer

Varumärke:	ATen
Kategori:	Inte kategoriserad
Modell:	BP72V18AH
Färg på produkten:	Zwart
Sladdlängd:	1 m
Förpackningens vikt:	60 g
Förpackningens bredd:	220 mm
Förpackningshöjd:	22 mm
Användarmanual:	Ja
Antal per paket:	1 stuk(s)
Förvaringstemperatur:	-40 - 80 °C
Stöder Linux:	Ja
Serveroperativsystem som stöds:	Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019, Windows Server 2022
Chipset:	FTDI - FT232R
(Ytter) huvudpaketets höjd:	290 mm
(Ytter) huvudförpackningens bredd:	570 mm
(Ytre) huvudpaketets längd:	355 mm
Kvantitet per (yttre) huvudkartong:	100 stuk(s)
Drifttemperatur (TT):	-40 - 80 °C
Relativ luftfuktighet i drift (VV):	0 - 95 procent
Anslutning 1:	USB Type-A
Anslutning 2:	RS-232
Kontakt 1 formfaktor:	Recht
Kontakt 2 formfaktor:	Recht
Anslutning 1 typ:	Mannelijk
Anslutning 2 typ:	Mannelijk
FIFO (först in, först ut):	256 B
Baud hastighet:	921.6 Kbit/s
Databitar:	7, 8
Stoppa bitar:	1, 2
Paritetsbit:	Even, Mark, N,Odd, Space